fiduciary

Author Topic: Official Force Fx troubleshooting FAQS  (Read 67957 times)

0 Members and 1 Guest are viewing this topic.

Offline Sailesh

  • No Force
  • *
  • Posts: 1
  • Um...Hello?
Re: Official Force Fx troubleshooting FAQS
« Reply #75 on: January 21, 2017, 01:04:24 PM »
Hi everyone,

I've got the Master replicas Force fx Darth Vader ANH lightsaber (6*AA battery 2003 version). It lights up and down, but the sound effects have suddenly stopped working.

I'd be extremely grateful if anyone has any advise on how I can trouble shoot the problem and get the sound working again. Do I need to replace the battery and speaker pack?

Many thanks

Offline trirevan

  • No Force
  • *
  • Posts: 1
  • Um...Hello?
Re: Official Force Fx troubleshooting FAQS
« Reply #76 on: March 11, 2017, 03:39:35 PM »
Hi I just registered to this site in desperation looking for a solution to a problem I'm having. I just bought a new Force FX Darth Vader lightsaber and when I turn it on all it does is repeatedly play clashing/crashing sounds without stopping, regardless of how much or how little the saber is moving. I've tried different batteries and moving the blade in any way or hitting it doesn't seem to change anything. I'd like to know if anyone has any ideas on what's going on or what I should do.

Offline Skywalker17

  • No Force
  • *
  • Posts: 1
  • Um...Hello?
Re: Official Force Fx troubleshooting FAQS
« Reply #77 on: November 28, 2017, 09:01:56 PM »
My 2010 Hasbro Anakin Skywalker Ep. 3 removable blade fx lightsaber, the light and the sound barely work. The light will be extremely dim and won't power all the way up the blade. After 2-3 seconds after ignition, it will just stop working and then won't turn back on. At first I thought it may have been a connection problem with the battery pack but I don't think that's what's up anymore. Any ideas on this?

Offline Braulio_luna

  • No Force
  • *
  • Posts: 1
  • Um...Hello?
Re: Official Force Fx troubleshooting FAQS
« Reply #78 on: December 30, 2017, 10:03:12 PM »
Hi! I just made my account (Braulio.luna9615@gmail.com) because I have a really important question. My Black Series Luke skywalker (ANH) lightsaber  is having sound issues, it turns on, but doesnt have sound to it, i tried many general things but nothing seemed to work. I would really appreciate a answer to this problem from anybody! Thank you!

Offline Jamesxfm

  • No Force
  • *
  • Posts: 1
  • Um...Hello?
Re: Official Force Fx troubleshooting FAQS
« Reply #79 on: July 31, 2018, 02:35:37 AM »
My lightsaber  wonít turn off in the middle but when on centre of the blade goes out. Canít figure it out. Any ideas?

Offline CelticGEM

  • No Force
  • *
  • Posts: 1
  • Um...Hello?
Re: Official Force Fx troubleshooting FAQS
« Reply #80 on: May 17, 2019, 09:12:17 AM »
I picked up a Black Series Darth Vader Force FX Lightsaber which only made a quick electronic sounding clicking sound when the switch was pressed and the blade didn't light up. I put in brand new Energizer Ultimate Lithium batteries and the only improvement was the sound changed from a quick click to two to three buzzing sounds whenever the switch is activated without the blade igniting. I've tried removing the batteries and reseating them but nothing changed. I'm convinced that some repair is needed. Can anybody help?
« Last Edit: May 17, 2019, 09:30:29 AM by CelticGEM »

Offline SecretBlue02

  • No Force
  • *
  • Posts: 1
  • Um...Hello?
Re: Official Force Fx troubleshooting FAQS
« Reply #81 on: June 23, 2019, 06:44:01 PM »
I have a new question. My Yoda FX Lightsaber's sound keeps going out. It's been doing this since 2012, when I got it. How can I fix it?