Greetings! This is my first post but not my first build, before I get into the long list of every part that the build contains, I’m trying to discover If anyone else has had a similar issue.
Samsung 25amp 18650 new
Even with a fully charged battery, the moment I remove the charger or killl key, the saber boots and immediately cycles to the next font, and the next and the next , endlessly,until I put the charger or kill key back in.. I have found other posts with some random reboot issues so I did try stealing the card from a graflex neopixel that I did that’s been working for months. Roughly the same result though it doesn’t get as far as the individual boot sound of the roar etc. nothing is loose and the card definitely seats deep and strong in the socket. The only thought I have at this point is the possibility that the switches could be momentary/latching and I’m just not able to interrupt the cycle by pressing at any point even though they were sold as momentary . While swapping the switch out is my next step if anybody has similar experience that would be great to avoid unnecessary hacking. Thanks ,Marc