fiduciary

Author Topic: Help me.Regarding Prizmv 5.5 Trident setting of Cree RGB LED.  (Read 100 times)

0 Members and 1 Guest are viewing this topic.

Offline Masayuki Sugiyama

  • No Force
  • *
  • Posts: 13
  • Um...Hello?
Help me. :cry: Regarding Prizmv 5.5 Trident setting of Cree RGB LED.The manual page 62 was referred to. I added and wired the Trident RGB board. It worked well. But Trident does not work.I confirmed the settings. I set it to tridentm = 1000 on the configuration sheet. Do you need other settings? If anyone who has finished Cree RGB LED Trident please let me know the settings.

Offline K-2SO

  • Killer Droid Extraordinaire
  • Administrator
  • Master Force User
  • *
  • Posts: 947
  • Congratulations! You are being rescued.
Re: Help me.Regarding Prizmv 5.5 Trident setting of Cree RGB LED.
« Reply #1 on: July 09, 2019, 06:41:13 PM »
I highly recommend going through the manual again, especially pages 54 and 55 which cover all of the Trident configurations.

Also, explaining what you are trying to ultimately accomplish (in detail), and what you have setup would be very helpful.

Also, I deleted your other post. Please do not double post.

I find your arguments vague and unconvincing.

Quiet! *Slap* And there’s a fresh one if you mouth off again.

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4310
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: Help me.Regarding Prizmv 5.5 Trident setting of Cree RGB LED.
« Reply #2 on: July 09, 2019, 11:32:59 PM »
The configuration is correct for activating the RGB board either you still need to declare the channels that will be delayed for now all your 3 channels are non delayed, this is why they are passed through the RGB board but not staggered.

Offline Masayuki Sugiyama

  • No Force
  • *
  • Posts: 13
  • Um...Hello?
Re: Help me.Regarding Prizmv 5.5 Trident setting of Cree RGB LED.
« Reply #3 on: July 10, 2019, 12:58:13 AM »
The configuration is correct for activating the RGB board either you still need to declare the channels that will be delayed for now all your 3 channels are non delayed, this is why they are passed through the RGB board but not staggered.

There was a deficiency in my question content. LED does not light up.

Offline Masayuki Sugiyama

  • No Force
  • *
  • Posts: 13
  • Um...Hello?
Re: Help me.Regarding Prizmv 5.5 Trident setting of Cree RGB LED.
« Reply #4 on: July 10, 2019, 12:59:49 AM »
I highly recommend going through the manual again, especially pages 54 and 55 which cover all of the Trident configurations.

Also, explaining what you are trying to ultimately accomplish (in detail), and what you have setup would be very helpful.

Also, I deleted your other post. Please do not double post.

Thank you. Check the manual again.