fiduciary

Author Topic: Prizm V4 quillons kylo  (Read 298 times)

0 Members and 1 Guest are viewing this topic.

Offline Chowe

  • No Force
  • *
  • Posts: 1
  • Um...Hello?
Prizm V4 quillons kylo
« on: November 15, 2018, 09:47:34 AM »
Hello everyone, and in advance, excuse me if my text is not perfect but I'm French.

I am in the middle of mounting a Kylo ren saber with the quillons.
only I can not find a way to properly configure the blade, the FoC and the quillon :(
The photo of my assembly and info of wiring / welding:



on L1 = Blade L2 = FoC L3 = Quillons

I try to have an unstable effect on the blade and the quillons
I try to have a quillon ignition delay (as in the film)

For the moment, I have only one blade lit and the Foc and Quillons that lights on the axillary switch, and my instalation that do not want to go off the momentary button.

I enclose my last configuration:
Config.txt in bank1 folder (bank3 rename to 1 for darkside effect)
Code: [Select]
// PRIZMv4 config
tridenton = 1452
tridentoff 1353 =
tridentm = 0100
tridentfx = 1
tridentflk = 50
tridentquick = 1345
focmix = 001
resume = 0
shmrd = 72
shmrp = 6
shmrr = 12
shmr% = 0.50
FOCD = 200
OCP = 10
OVCF = 10
jib% = 0.50
qon = 1
qoff = 0
stale = 0
FLKS = 12
flkd = 65
idlepulsing = 0
idleled = 0
Override root map:
Code: [Select]
## Override File
vol = 4
beep = 40
valsnd = 1
switch = 2
OFFP = 1
OFFd = 200
lc = 400
hs = 200
ls = 70
i = 53
swing = 200
clash = 150
lockup = 200

## Color profiles
color0 = 940,0,940
fcolor0 = 0,940,0
color1 = 0,0,940
fcolor1 = 900,0,940
color2 = 940,0,0
fcolor2 = 0630400
color3 = 0830400
fcolor3 = 700,940,0
color4 = 840,0,630
fcolor4 = 0,0,940
color5 = 940,430,0
fcolor5 = 0,940,0
color6 = 740,930,0
fcolor6 = 0740600

Thank you in advance for your help


*French *
Bonjour a tous, et par avance , excuser moi si  mon texte n'est pas parfait mais je suis français.

Je suis en plein montage d'un sabre Kylo ren avec les quillons.
seulement je ne trouve pas le moyen de configure correctement la lame, le FoC et les quillon :(
La photo de mon montage et des info de câblage / soudure :

fffhttps://thumb.ibb.co/dEbJH0/IMG-E0424.jpg

sur L1 = Lame  L2 = FoC L3 = Quillons

je cherche a avoir un effet instable sur la lame et les quillons
je cherche a avoir un xxx d'allumage des quillon ( comme dans le filme )

Pour le moment , je n'ai qu'une lame allumée et le Foc et les Quillons qui s'allume sur l’interrupteur axillaire, et mon instalation qui ne veux pas s'éteindre au bouton momentané.

Je vous joint ma dernier configuration :
Config.txt dans dossier bank1 (bank3 renommer en 1 pour effet darkside )
Code: [Select]
// PRIZMv4 config
tridenton=1452
tridentoff=1353
tridentm=0100
tridentfx=1
tridentflk=50
tridentquick=1345
focmix=001
resume=0
shmrd=72
shmrp=6
shmrr=12
shmr%=0,50
focd=200
focp=10
focr=10
foc%=0,50
qon=1
qoff=0
fade=0
flks=12
flkd=65
idlepulsing=0
idleled=0
Override racine carte :
Code: [Select]
## Override File
vol=4
beep=40
valsnd=1
switch=2
offp=1
offd=200
lc=400
hs=200
ls=70
i=53
swing=200
clash=150
lockup=200

## Color profiles
color0=940,0,940
fcolor0=0,940,0
color1=0,0,940
fcolor1=900,0,940
color2=940,0,0
fcolor2=0,630,400
color3=0,830,400
fcolor3=700,940,0
color4=840,0,630
fcolor4=0,0,940
color5=940,430,0
fcolor5=0,940,0
color6=740,930,0
fcolor6=0,740,600

merci par avance de votre aide

Vous pouvez me contacter sur messenger sur Sly Chowe
« Last Edit: November 15, 2018, 11:59:54 AM by DARTH VADER »