fiduciary

Author Topic: Teensy V3 Extension Board  (Read 827 times)

0 Members and 1 Guest are viewing this topic.

Offline Danlim

  • No Force
  • *
  • Posts: 6
  • Um...Hello?
Teensy V3 Extension Board
« on: February 24, 2018, 12:02:50 AM »
Many thanks to Profezzorn for letting me post to his forum...


Introducing the new
"Teensy V3 Extension Board"
What it does is it extent all the connections from the V3 teensysaber board and rerouted into a PCB.
Within the PCB, I have include the Battery holder, Speaker, Switches, LED, On/Off SW and soldering pad to the Neopixel connector... 
Meaning, no wiring is needed.
Installation is super easy, just solder the Teensy 3.2, V3 board and this V3 Extension board together.
Connect 3 short wire to the blade connector.. That's it.
Here's the illustration of how it looks:



Here's a illustration on a Graflex hilt:


The board will able to fit most tube/Hilt with a diameter of 26mm or more. Total length is only 140mm
It is simple and streamline..

Head over to Teensy V3 Extension Board | The Rebel Armory more details and installation instructions.
« Last Edit: February 28, 2018, 01:13:37 AM by Danlim »

Offline KanyonKris

  • Padawan Learner
  • **
  • Posts: 72
  • Um...Hello?
Re: Teensy V3 Extension Board
« Reply #1 on: February 26, 2018, 08:10:02 AM »
Very nice.

So the aircraft connector attaches to the end of your extension boards? If so, how is the aircraft connector mechanically mounted?

BTW, your link to details doesn't work.

Offline Danlim

  • No Force
  • *
  • Posts: 6
  • Um...Hello?
Re: Teensy V3 Extension Board
« Reply #2 on: February 27, 2018, 11:35:58 PM »
Due to many variation of hilt design it is impossible to create a common mechanical mount...
I just use a GX16 connector as a illustration, you can create your own custom mount to suit your hilt...

Teensy V3 Extension Board | The Rebel Armory