fiduciary

Author Topic: LS6 blade depth  (Read 599 times)

0 Members and 1 Guest are viewing this topic.

Offline Millicente

  • Padawan Learner
  • **
  • Posts: 51
  • Um...Hello?
LS6 blade depth
« on: November 16, 2017, 07:20:49 AM »
Wondering what it is. I imagine this saber wouldnít be good for dueling due to blade depth or thin neck or both.

Offline 3251bimmer

  • No Force
  • *
  • Posts: 16
  • Um...Hello?
Re: LS6 blade depth
« Reply #1 on: November 16, 2017, 11:11:32 AM »
I would assume itís similar to the K4. The blade depth is shallow but it holds the blade tight and Iíve done light dueling with mine. Wouldnít smack it against a tree but I donít generally do that anyway. Hope this helps

Offline Millicente

  • Padawan Learner
  • **
  • Posts: 51
  • Um...Hello?
Re: LS6 blade depth
« Reply #2 on: November 16, 2017, 12:33:51 PM »
Iím hoping itís a little deeper. I also wonder how hard a neopixel Install would be. I donít know if you could place the plug in the emitter and still have enough depth

Offline Darth Brooks

  • Force User
  • ***
  • Posts: 229
  • Um...Hello?
Re: LS6 blade depth
« Reply #3 on: November 16, 2017, 06:44:54 PM »
Iím hoping itís a little deeper. I also wonder how hard a neopixel Install would be. I donít know if you could place the plug in the emitter and still have enough depth
Here's your ticket for the thin neck blade no matter what Neopixel capable board you'd like to use! It's what's going in mine :cheesy:

http://www.saberigniter.com/IntelliBlade.aspx

Offline Millicente

  • Padawan Learner
  • **
  • Posts: 51
  • Um...Hello?
Re: LS6 blade depth
« Reply #4 on: November 17, 2017, 07:56:08 AM »
Thank you!!

Offline Meatsweats

  • Padawan Learner
  • **
  • Posts: 71
Re: LS6 blade depth
« Reply #5 on: November 17, 2017, 08:46:18 AM »
Dmitry Shtok also posted wip on a low profile pixel connector fiy.

Offline korbanth

  • Manufacturer
  • Trade Count: (+1)
  • Master Force User
  • *
  • Posts: 1419
Re: LS6 blade depth
« Reply #6 on: November 22, 2017, 06:40:46 AM »
The LS6 emitter will be 1/2 inch deeper than the K4 Emitter - so good news

Offline Darth Brooks

  • Force User
  • ***
  • Posts: 229
  • Um...Hello?
Re: LS6 blade depth
« Reply #7 on: November 22, 2017, 07:44:10 AM »
The LS6 emitter will be 1/2 inch deeper than the K4 Emitter - so good news
That's great news!