I have recently been working on building my online business back up,
Having found saber forging I wanted to see if any of the items I would get where of any demand here.
The only items I have tested to work so far are a cree 12w led that can be seen in my saber Horizon.
also small red flat head leds and a single li battery charger via usb.
Please note this is not a selling post,
I want to see if there is any demand for these.
Since this is my first time making a post like this any comments on improvements are welcome!!
Specs for cree led:
LED Type:4pcs XPE LED Chips
Emitter Color: Red
Beam Angle: 110 degrees
Lens color: water clear
PCB board: Diameter 20mm Cooper PCB base
Specs for 5mm red leds.
(if at 20mA)
Wave length (nm)
min 620 max 625
luminosity intensity (mcd)
min 300 max 500
forward voltage (v)
min 2 max 2
Single cell Li charger via usd specs:
Lithium Battery Charger Module - Linear charging.
Current : 500MA adjustable(Default 300MA)
Charge precision : 1.5%.
Input voltage : DC 4.5V-8V(Recommend DC 5V)
Full charge voltage : 4.2V.
Led indicator : red is charging Green is full charged.
Reverse battery protection : YES
Input interface : mini USB.
Work temperature : -40° to +85°
PCB Size : 24mm*12mm
Charging module comes with charge-management functions, will not overcharge or over discharge
Comes with rechargeable function, Will enter standby mode when fully charged. When the battery capacity is below 80%, the charging starts.