fiduciary
« previous next »
[1] Go Down

Author Topic: darth sidious korbanth run lightsaber  (Read 4049 times)

0 Members and 1 Guest are viewing this topic.

Offline georgie_j0

  • No Force
  • *
  • Posts: 13
  • Um...Hello?
darth sidious korbanth run lightsaber
« on: March 01, 2015, 06:13:40 PM »
Ok guys this is my first lightsaber built. I must say building this saber was tough . The material i used is:

The Nano Biscotte V2
2.1 mm Recharge port(hidden since it has deep sleep)
3.7 rechargeable battery
Luxeon Tri-Rebel Star (red of course)
SPST Momentary tactile switch
switch rings ( from force relic)
Nano Biscotte Cradle (from force relic)

I was really surprise how small and skinny this lightsaber was but I was manage to squeeze ever thing in there. Two thing I was disappointed in was the foc board didn't work. I Don't know if I fried the board or wired it up wrong. The second is the emitter on the saber won't snug in place. I know some people said if you tighten the screw It would lock in place but that didn't work for me. Other than that this lightsaber is beautiful. i like to thank korbanth for the run, thank force relic for the cradle and ring and finally, thank you guys for helping me out. Enjoy!

Korbanth darth sidious lightsaber custom - YouTube









« Last Edit: March 01, 2015, 11:57:48 PM by georgie_j0 »
Logged

Offline ARJedi

  • Padawan Learner
  • **
  • Posts: 80
  • Um...Hello?
Re: dath sidious korbanth run lightsaber
« Reply #1 on: March 01, 2015, 07:30:33 PM »
That's pretty nice!!
Logged

Offline Caine

  • Kwai Chang Caine master of duel-fu
  • Master Force User
  • *****
  • Posts: 5454
Re: dath sidious korbanth run lightsaber
« Reply #2 on: March 01, 2015, 09:16:43 PM »
Use a rubber o-ring between the body and emitter. That should alleviate that looseness.

You didn't fry the board if it and the LED operates OK. Check your wiring regarding the FoC.
Logged

Offline georgie_j0

  • No Force
  • *
  • Posts: 13
  • Um...Hello?
Re: dath sidious korbanth run lightsaber
« Reply #3 on: March 01, 2015, 10:46:25 PM »
Ah an o-ring would work perfectly...and I guess it was the wiring....well it's too late to check becuz I took out the foc board  :-[
Logged

Offline thiefone

  • No Force
  • *
  • Posts: 28
  • "What have we here"
    • Thieftube (Lightsaber Videos)
Re: darth sidious korbanth run lightsaber
« Reply #4 on: December 23, 2015, 01:52:13 PM »
Can I buy this Saber from you?
Logged

Offline 97th Acolyte

  • Master Force User
  • *****
  • Posts: 803
  • [insert witty comment here]
Re: darth sidious korbanth run lightsaber
« Reply #5 on: December 23, 2015, 02:57:36 PM »
Quote from: thiefone on December 23, 2015, 01:52:13 PM
Can I buy this Saber from you?

Might be easier to post a wanted ad rather than replying to threads from 9 months ago that aren't in the for sale section.
Logged
Proud owner of:       JSK1 - Jaina Solo Kotobukiya lightsaber - created by Bombarta
Harp's Starkiller/Kylo Ren fusion - Prizm                      
Deadpool's Deathstick - CS2.5 Reveal, JQsabers               
JK-Sabers Battle damaged/Reveal Maul - Empty             
US Raven
Korbanth:
 Darth Maul - Empty
 Duke - NBv2, JQSabers
 Qui Gon - NBv2, MasterSabers

Offline Greebles

  • Formerly known as Codeweasel
  • Master Force User
  • *****
  • Posts: 773
  • “You must unlearn what you have learned.”
Re: darth sidious korbanth run lightsaber
« Reply #6 on: December 23, 2015, 04:40:18 PM »
Great job.

The Sid hilt is certainly a challenging install especially for a first build.

-Denzil
Logged
[1] Go Up
« previous next »
 

retrousse