Prices and Services as performed by THE SABER BAY
This is a basic cost guide to give you an estimate to what it would cost to make your saber dreams come true
To Get A Custom Estimate Please Email me at JUSTINTMARS@ME.COM or Private Message me Here
-Listed below are the lowest cost of LABOR ONLY for me to install a premium Plecter Labs sound board in your saber.
-The cost below are if your saber is ready for a basic install, meaning the speaker, battery, recharge port, switch or switches and LED are wired and ready to be wired to the board.
-Accent leds, bargraphs and illuminated switches are labeled as an EXTRA fee. Additional fees will be listed below and a demonstration of how to calculate cost.
-All installs include calibration of board and install of a non-pirated sound font or fonts
-Installs of a used board will cost 10$ extra as I will test board thoroughly before installation
.[/size]These Cost Are For Basic Install, other options are EXTRAS and will be added to estimate per task -Nano Biscotte/ NB: $90-150 (Includes Wiring of Board, Switch, speaker, and battery system)
-Petite Crouton/ PC: $150-250(Includes Wiring of Board, Switches, speaker, and battery system)
-Crystal Focus/ CF: $200-300(Includes Wiring of Board, Switches, speaker, and battery system)
Below Listed are the cost for the LABOR ONLY for EXTRAS fee
-Accent Led(or Illuminated switches): $10 Per Led
-Main Blade matching Pommel Led: $20 Per led matched
-Custom Switch hole(when there is no pre drilled hole for a standard switch): $30-40
-Recharge Port Hole(When there is no pre drilled hole for your recharge port): $30-45
-R.I.C.E Port hole(when your want the rice port on outside of the saber and there is no pre drilled place for it) : $30
-In hilt Rechargeable battery install(includes wiring of recharge port w/ battery): $35
-Speaker install: $12
-Flash on Clash Install(includes wiring foc color on led): $50
- Wiring and installing Led module(main blade color): $15 single fee ($10 per each additional led wired if multi colored led)
-Adding quick disconnect to led in order to swap out led modules or multiple colors on a multi dye led: 5$ Per led wired
-Color Extender for Crystal Focus 6 or 7 and Petit Crouton V3: $85
-R.I.C.E Port Wiring: $35
-Modding and installing a CF6 board to work with 3.7 volt single cell battery and wiring it to work with a three color: 30$ (fee on top of the $190 to install the cf,WARNING SOME SOUND QUALITY IS LOWERED WITH THIS MOD, This allows multi color changing saber with out color extender board)
-Installing of smd bar graph Leds directly on the Crystal focus or Petit Crouton: $12 Per led
-Tear Down Fee When you send me a saber with electronics already in it and I must uninstall some or all of them to upgrade your saber: $25 CREE XPE2 LED ORDER INFO HERE:
FS:Tri Cree Xpe2 Order ThreadEXAMPLES OF LABOR PRICE ESTIMATES
You have a working mhs(Built from The Custom Saber Shop) saber that has already has a petite crouton 2.0 installed. With two non-illuminated av switches recharge port and a luxeon rebel blue Led
You want to upgrade to a
Crystal Focus 6 or 7 with color extender, add illuminated switches and have a rice port behind the speaker
Fees of labor would include
Tear down fee $25
Crystal focus install fee $190
Color extender install fee $85
Illuminated av switch install $10x2= $20
Labor Charges would be $320
You have saber with nothing installed, it has a hole for the switch and recharge port and you want and nano biscotte installed with a tri rebel rgb led so you can pull out and swap the led color to your liking
Nano Install $90
Rechargeable battery and recharge Port install $35
Led Wiring $15 +10+10=$35
Quick disconnect for each led 3x$5=$15
Labor charges would be $175
$45 minimum cost, $15-25 per part,
Parts must be completely cleaned and ready for coating.
PM or email me to ask which colors are currently available. If you want a color not available it will cost $10 to acquire it.
All prices stated do not include shipping cost or parts cost
Cost of parts are due before work is started.
Labor cost due within 4 days of sabers completion
A 2% fee will be added per day that payment is late
Paypal or money order preferred
When using paypal if you choose option the gifts and services option, a 4% fee will be added to total cost
Unless otherwise stated at time of commission, all commissioned sabers will be done with in two weeks-four weeks of all parts arriving and final options confirmed unless otherwise stated
LAST MINUTE(once work is started after options confirmed) changes will result in longer build times and an extra $20 fee
Shipping will be USPS for CONUS and range from $6-25(depending on insurance), all item will be shipped same or next business day upon Final Payment
60 Day limited Warranty, anything after that subject to fees
Warranty does not include damage caused by (1) acts of God, accident, misuse, abuse, negligence, improper handling, commercial use or modifications of this product, or normal wear and tear; (2) improper operation or maintenance of this product; or (3) attempted repair by any other party than myself or an ISG member. This Limited Warranty does not apply where it is determined by an ISG member or me that there is no fault with the Product itself. Repairs not covered by the Limited Warranty may, at ISG Memberâ€™s discretion, or mine be carried out at the owner's expense.
Insurance will be offered before shipping each saber, if you reject the cost I am not responsible for any loss or damage in shipping
I am not responsible for cost of return shipping.
I do not warrant electronics, such as soundboards, batteries and LEDS, as these are all items I did not create.
Sound Board repairs need to be performed by their manufacturers or authorized repair providers. You will be responsible for any fees including shipping.
I do not warrant paint or powder coat jobs done by myself or someone else after they pass initial inspection upon receiving the item as finishes naturally wears and fades
Attempts to repair yourself will void the warranty.
Warranty is non transferable
[/b] BUILD LOG Commissioned Jobs
SEPT-OCT 2014 *FINISHED*
1)mhs staff for Thomas(non-fx) *Completed*
2)2 sabers for Vercify *Completed*
3)Qui Saber LED Swap for The Chosen one *Completed*
4)Weathering and Switch Repair on Sk Saber for RyDiddy *COMPLETE*
5)Mr Esb Vaders Nano install for darkjedi29 *COMPLETE*
6)Crystal Chamber Powder Coating for Arryck Corso *Completed*
1)Custom Old Replublic Saber For Bekstorm(waiting on custom parts from tcs)
2)Luke V2 Weathering and PC3 install For Rydiddy(Install 75% done)
3)GCS INSPIRED Jaina like saber( 3d modeling speaker holder)Personal Builds(Some w/ the intention of being Sold after Completion)
1)Upgrade VV SKR2#1 To cf7
2)Mr Yoda Pc2 *COMPLETED*
4)Or Obi/Ani Clan Hilt PRIZM*COMPLETED* Sold
5)Graflex and Yoda Chassis Kit
7)Coran Horn Cf7 Upgrade *COMPLETED* 08/31
8 )*Secret Project*
9)Rebellion Kotor Cf7 upgrade *COMPLETED* 08/29 8)Other Obligations/Projects1)54 Modules w/ Prizm installed for Saberz
2)Finish Revan Costume