The S.A.B.E.R. GUILD: Saber Manufacturers => Sith Planet => Topic started by: Darth Matth on May 08, 2019, 10:51:08 AM

Title: Sith Planet MPP 2.5 Construction guide for the 3 types
Post by: Darth Matth on May 08, 2019, 10:51:08 AM
Hello Forum friends.
I just received the incredible luxeous package of my Vader MPP 2.5 Saber Kit.
Now I have to find out which model it wants to be. :cheesy:

The 2.0 had holes for this, so I lowered the Clamp and than it was easy to place those grips trait.
On this version there are no holes, which makes a lot of people happy I suppose, but makes it difficult for a non saber smid like me.
For example, does anyone have a clever trick of how to place the grips on this saber?

There is also a half ring with metal strips on it, and I have no idea what it's for. see photo 1
(https://i.ibb.co/NKrpvRy/20190508-192906.jpg) (https://ibb.co/NKrpvRy)

Also, how do you fill up the rest of the control box, or does everybody keep this open, see photo 2
(https://i.ibb.co/L8YYWdP/20190508-193014.jpg) (https://ibb.co/L8YYWdP)

Last but not least.
I've put the emiterplug in the saber, and gladly not too deep,, so I could get a little grip on it.
Putting this plug as deep it should be (I think)to me, there is no way to get this plug out again.
What's the trick for this?
(https://i.ibb.co/gVHYnkH/20190508-193423.jpg) (https://ibb.co/gVHYnkH)