FX-Sabers.com
Trade Federation - Buy/Sell/Trade => Misc Equipment => Topic started by: Sanjuro on June 17, 2012, 06:29:07 PM
-
Hello All,
I am announcing my Crystal Chamber Kit for the MHS parts. This will be a limited release of 15 kits.
- 1.24" Outer diameter (fits inside standard MHS part)
- Adjustable height from 1" to 3+"
- Disk cut outs for 3mm LED placement (6 total)
- Hidden wire pass through in the brass tubes (six, 26 gauge wires total)
- Extra cutouts for wire pass through behind the crystal chamber (non-hidden)
Each kit will contain the following:
- Brass tube (you will need to cut to length)
- 4-40 threaded rod (you will need to cut to length)
- 4 brass hex nuts
- 2 black end disks
- 1 black middle disk
- 1 bottom clear acrylic LED disk
- 1 brushed bronze lower base power gate
- 6 lower power gates and black separators
- 1 brushed copper middle power base gate
- 3 brushed copper middle power crystal gates
- 3 middle gate separators
- 1 power base gate accent
- 1 upper clear acrylic power focus gate
- 1 upper brushed bronze focus plate
- 1 copper tube (to hold the crystal)
- 1 quartz crystal
- 3mm fiber optic cable
You may specify the color of the:
- Lower Power gates (the lower blue ones in the video and pictures)
- Middle Power gate separators (they are clear in the pics and videos)
- The power base gate accent piece (the crescent blue piece that sits on the middle brushed copper base)
- The bottom LED disk (the very bottom clear acrylics piece that sits just above the bottom black disk).
Colors are:
- Clear
- Dark green translucent
- Dark red translucent
- Lime green translucent
- Orange translucent
- Dark blue translucent
- Light blue translucent (this is the color in the pics and video)
You may also specify the color of the 3 middle power crystal gates (the gates that circle the crystal and are copper in the pics and videos)
- brushed copper
- brushed silver
Each Kit will be $125 plus shipping ($6 in the US or $9 outside the US).
Post your intent to buy here on this thread. Please also post your color choices. I will then contact you with payment information. After payment is received, the kits will be shipped within 1 week.
(https://i1199.photobucket.com/albums/aa479/Sanjuro40/IMG_0953.jpg)
(https://i1199.photobucket.com/albums/aa479/Sanjuro40/IMG_0950.jpg)
(https://i1199.photobucket.com/albums/aa479/Sanjuro40/IMG_0949.jpg)
(https://i1199.photobucket.com/albums/aa479/Sanjuro40/IMG_0948.jpg)
(https://i1199.photobucket.com/albums/aa479/Sanjuro40/IMG_0958.jpg)
(https://i1199.photobucket.com/albums/aa479/Sanjuro40/IMG_0938.jpg)
(https://i1199.photobucket.com/albums/aa479/Sanjuro40/IMG_0939.jpg)
Video here:
Sanjuro Systems' Crystal Chamber for a Lightsaber made from MHS parts - (http://youtu.be/8w4Zh1cPyPE)
Confirmed:
**1. Xanatos1986 - Lt Blue, Clear, Lt Blue, Silver
**2. Solan Starr - Lime Green, Copper
**3. DarthSithWalker - Dark Red, Orange, Clear, Lt Blue, Copper w/ Copper tubes
**4. Jango Fett - Dark Red, Copper
**5. impa (Chris)- Lt Blue, Clear, Lt Blue, Clear, Copper
**6. DarthTerest - Dark Red, Clear, Dark Red, Clear, Copper
**7. ag3nt4877 - Dark Red, Clear, Dark Red, Clear, Silver
**8. Darth Ikielu - Orange, Clear, Orange, Clear, Copper
**9. Merana33 - Dark Red, Clear, Lime Green, Clear, Silver
**10. chaos_79 - Lt Blue, Clear, Lt Blue, Clear, Copper
**11. Link (Brandon) - Lt Blue, Dark Red, Lt Blue, Dark Green, Copper
**12. Kalizon - Dark Blue, Lt Blue, Dark Red, Lt Blue, Copper
**13. GalenMarek - Lime Green, Clear, Clear, Lime Green, Copper
**14. Farrish - Lt Blue, Clear, Lt Blue, Clear, Copper
**15. Sini Star - Dark Red, Dark Red, Dark Blue, Dark Blue, Silver
Color choice order: Lower Power Gate, Middle Power Gate Separators, Accent Piece, Bottom LED Disk, Crystal Power Gate
* PAID
** SHIPPED
Standby List:
16. knobe
17. Mersenne
18. Nihilus
Respectfully,
Sanjuro
-
I'll take one!
- Lower Power gates ~ Lime Green translucent
- Middle Power gate separators ~ Lime Green translucent
- The power base gate accent piece - Lime Green translucent
- The bottom LED disk ~ Lime Green translucent
3 middle power crystal gates ~ - brushed copper
-
I'd be in for one but I'd kind of like to see pics/video first. Can you put me down as tentative?
EDIT: Thanks for the quick pic! I'm in for one. I'll get back to you with my choices
-
same here Ill take 1 and ill get back with choices.
I choose one just.like in the picture.
-
Ill take one just working out the choices
-
I take Qty:1 with choices to come laters Thanks John.
Edit,
Color Update :
Lower Power Gates ~ Dark RED Translucent
Middle Power Gate Separators ~ Orange Translucent
Power Base Gate Accent Piece ~ Clear
Bottom LED Disk ~ Light Blue Translucent
3 Middle Power Crystal Gates ~ Brushed Silver Gates
Tubes ~ Copper
-
I'll take one
- Lower Power gates ~ Dark red translucent
- Middle Power gate separators ~ Dark red translucent
- The power base gate accent piece - Dark red translucent
- The bottom LED disk ~ Dark red translucent
3 middle power crystal gates ~ - brushed copper
-
Pm Sent, I will need to decide exactly how I want it, but I'm in for one :)
EDIT: Nah dang, looks like Mrs. Darth Vader might have reached her limit for letting me buy stuff today...guess I'm out, sorry Sanjuro :(
-
i'm down for one. PM incomin.
cheers
- Impa
-
Changed my mind =(
-
Here ! I take also one ! One for the Germans *ggg* ;)
Colours:
- Lower Power gates (the lower blue ones in the video and pictures) DARK RED TRANSLUCENT
- Middle Power gate separators (they are clear in the pics and videos) CLEAR
- The power base gate accent piece (the crescent blue piece that sits on the middle brushed copper base) DARK RED TRANSLUCENT
- The bottom LED disk (the very bottom clear acrylics piece that sits just above the bottom black disk). CLEAR
You may also specify the color of the 3 middle power crystal gates (the gates that circle the crystal and are copper in the pics and videos)
- BRUSHED COPPER
Thank you waiting for payment informations
-
Maybe a stupid question but do they come pre-assembled? Also, can they handle being put into a saber that will see moderate dueling?
-Scrimpy
-
I'll take one .. Choices to come soon ... Is it possible to still see a video of this chamber in action?
-
I'll take one, choices coming to you soon.
Edit:
- Lower Power gates - Orange translucent
- Middle Power gate separators - clear
- The power base gate accent piece - Orange translucent
- The bottom LED disk - clear
Edit2: Oh and copper on the crystal gates please!
Thanks!
-
Maybe a stupid question but do they come pre-assembled? Also, can they handle being put into a saber that will see moderate dueling?
-Scrimpy
I am sorry - but I decided not to preassemble these as there are too many variations in how people build their lightsabers.
But the good news is that the design is strong enough to handle moderate dueling - as long as you assemble it well.
Respectfully,
Sanjuro
-
I probably shouldn't, but I'll hate myself if I let this opportunity pass me by.
Put me down for QTY:1
- Lower Power gates: Dark Red
- Middle Power gate separators: Clear
- The power base gate accent piece: Lime Green
- The bottom LED disk: Clear
- 3 middle power crystal gates: Brushed Silver
-
Checking with my current sabersmith, if u could hold a spot for me that would be awesome! I'll let you know within 24hrs if it's a go or not. If this isn't an option, I understand :-\
Thanks,
Scrimpy
-
gorgeous, this is going into my graflex
-
the crystal chambers looks fantastic sanjuro well done i will pick one of these up at another time
great job
-
I'll take one!! I'll let you know colour choices very soon!!
EDIT
Colour choices
- Lower Power gates - Light blue translucent
- Middle Power gate separators - clear
- The power base gate accent piece - Light blue translucent
- The bottom LED disk - clear
3 middle power crystal gates - brushed copper
-
EDIT: PM Sent with Payment and the PM says no subject... sorry about that :(
Put me in for one !
Qt. 1
Lower Power gates - Light blue
Middle Power gate separators - Dark Red Translucent
The power base gate accent piece - Light blue Translucent
The bottom LED disk - Dark Green Translucent
Thanks !
-
what goes in the little gap inbetween the blue power gates? does another crystal go there?
-
Put me down for one.
Updated with colors
- Lower Power gates ~ Dark Blue translucent
- Middle Power gate separators ~ light blue translucent
- The power base gate accent piece - Dark red translucent
- The bottom LED disk ~ light blue translucent
3 middle power crystal gates ~ - brushed copper
-
Very excited for this!
3 Middle power gates: Copper
Lower Power Gates: Lime Green
Middle Power Gates: Clear
Accent piece: Clear
Bottom LEd Disk: Lime Green
-
just so im clear cause im a newbie but these are not the blade plugs he made a few months ago right?
-
its an internal saber crystal chassis system for mhs sabers
-
ahhhh, i see.
ok, ill keep my eyes open for the blade plug one. those were nice.
thanks Scorpion. :D
-
this looks awesome!
Count me in for 1, i will follow up with color choices shortly
thanks
Lower Power gates - Light blue
Middle Power gate separators - clear
The power base gate accent piece - Light blue
The bottom LED disk - clear
3 middle power crystal gates - copper
-
Well I'm out..... This time anyway. ;)
-
Sanjuro please dont forget to drop me a PN with the payment instructions where to send the money to...
-
what goes in the little gap inbetween the blue power gates? does another crystal go there?
Thank you for asking this.
You may put another crystal there. Or... you may put another set of LEDs to go in the middle plate.
Or...
Not seen in the pics, but reserved as a surprise for once the run had filled (which it now has)...
You may put 3mm fiber optic "piping" to lead up to the main crystal. I am including a strand of 3mm fiber optic piping that you can cut with a razor blade to fit. It gives a very nice "energy flow" look to the chamber.
Payment requests and info will be going out shortly. For those who are on the run, please post your color choices, and I will update the first post with the information.
Respectfully,
Sanjuro
-
I'll take one if a spot opens up. Put me on the standby list. Thanks
-
I am including a strand of 3mm fiber optic piping
WOW !!!! That is so cool sanjuro !!!! Thanks so much for adding that in !!! These will make some EPIC crystal chambers !!!!
" Understatement of the Year " lol
-
Lower power gates - Dark red translucent
Middle power gates - clear
Power base gate accent - Dark red translucent
Bottom LED disk - clear
3 middle power crystal gates - brushed silver
-
Hi Sanjuro
sorry for the late reply
I have a friend that would love to take a Crystal Chamber - as per the list example/prototype please.
I will compete the transaction for him, should you have one available or put him(me) on the list.
Thank you
Regards
Pete
-
Hi Sanjuro
sorry for the late reply
I have a friend that would love to take a Crystal Chamber - as per the list example/prototype please.
I will compete the transaction for him, should you have one available or put him(me) on the list.
Thank you
Regards
Pete
You got it. I put your name on the Standby list.
Repsectfully,
Sanjuro
-
lower gates : light blue
middle : clear
accent part: light blue
led disk: clear
brushed aluminum gates
thanks man great chamber
-
Excellent work. I would like to get one if a spot opens up. Please add me to the stand by list.
-
Hi San.
Here a my specification Colours for the Chamber:
lower gates : Dark red translucent
middle : clear
accent part: Dark red translucent
led disk: clear
3 middle power crystal gates - brushed Copper
-
Payment sent!!
-
PM sent with color options and a Question regarding the brushed parts
thanks :)
- Impa
-
cant get on the list at the mo but i will defo be picking one of these up in the future
-
For Everyone one the Lists, thank you.
Please make your color selections on this thread.
I will modify the first post - you may confirm your color selections there.
You may make changes up until Friday, June 22 - after that I will be lasering the acrylic. If you do wish to make a change, please PM me so I know that you wish to make a change. Please do not edit your earlier post.
Thank you again for your confidence in my commissions.
Respectfully,
Sanjuro
-
For Everyone one the Lists, thank you.
Please make your color selections on this thread.
I will modify the first post - you may confirm your color selections there.
You may make changes up until Friday, June 22 - after that I will be lasering the acrylic. If you do wish to make a change, please PM me so I know that you wish to make a change. Please do not edit your earlier post.
Thank you again for your confidence in my commissions.
Respectfully,
Sanjuro
You always do great work, Sanjuro! I think I speak for everyone when I say that we all look forward to seeing the end product!
-
Payment sent ! ;)
-
Payment Sent John :)
-
payment Sent
Cheers
- Impa
-
Paid Sanjuro - but please PM me at your earliest convenience. Seems I forgot to include my shipping address. :\
-
Also, did you receive my PM about the changes?
-
You know if these get popular enough, They could end up needing to make a custom tag.... So instead of saber tags.... we could have Crystal chamber tags or Crystal Emmiter Plug Tags.. ETC !!! Why stop at sabers ???? lol
-
Payment sent. Wow! theses crytal chambers look great can't wait it will go into my first build. Thanks Sanjuro
-
For Everyone on this Run,
Please confirm that I have your choices correctly (no need to respond if correct, just PM me if incorrect).
I am shipping all out tomorrow!
Thank you again,
Respectfully,
Sanjuro
-
Paid this morning
-
I got my kit this morning, thanks Sanjuro. It actually arrived before the saber did!!
-
Thanks San for the quick delivery to germany. It arrived Saturday morning. Checked all parts....really wonderful.
-
If a spot opens up I would like:
- Lower Power gates - Dark red translucent
- Middle Power gate separators - Dark red translucent
- The power base gate accent piece - Dark red translucent
- The bottom LED disk - Dark red translucent
3 middle power crystal gates - brushed silver
-
Looks like all 15 were paid and shipped so no opening up. I'm sure Sanjuro will do another run in the future :)
-
I am interested if you are still offering these!
-
Hey Sanjuro,
Will you be doing another run?
-
I believe he's stated in other threads that he's not planning another run of these anytime soon... :(