FX-Sabers.com
The S.A.B.E.R. GUILD: Saber Manufacturers => Plecter Labs => Sound boards technical issues / questions / problems => Topic started by: Masayuki Sugiyama on July 09, 2019, 06:26:00 PM
-
Help me. :cry: Regarding Prizmv 5.5 Trident setting of Cree RGB LED.The manual page 62 was referred to. I added and wired the Trident RGB board. It worked well. But Trident does not work.I confirmed the settings. I set it to tridentm = 1000 on the configuration sheet. Do you need other settings? If anyone who has finished Cree RGB LED Trident please let me know the settings.
-
I highly recommend going through the manual again, especially pages 54 and 55 which cover all of the Trident configurations.
Also, explaining what you are trying to ultimately accomplish (in detail), and what you have setup would be very helpful.
Also, I deleted your other post. Please do not double post.
-
The configuration is correct for activating the RGB board either you still need to declare the channels that will be delayed for now all your 3 channels are non delayed, this is why they are passed through the RGB board but not staggered.
-
The configuration is correct for activating the RGB board either you still need to declare the channels that will be delayed for now all your 3 channels are non delayed, this is why they are passed through the RGB board but not staggered.
There was a deficiency in my question content. LED does not light up.
-
I highly recommend going through the manual again, especially pages 54 and 55 which cover all of the Trident configurations.
Also, explaining what you are trying to ultimately accomplish (in detail), and what you have setup would be very helpful.
Also, I deleted your other post. Please do not double post.
Thank you. Check the manual again.