FX-Sabers.com

The S.A.B.E.R. GUILD: Saber Manufacturers => FX-SABERS Graflex Armory & GraflexShop "GRAFLEX FX-SABERS" => Topic started by: Yoda on October 02, 2015, 07:27:10 PM

Title: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yoda on October 02, 2015, 07:27:10 PM
Hello everyone

I do apologize for not covering this officially and sooner but I wanted to get a hilt
in hand first and have not yet been able to do that.  :rolleyes:

However since some members lately signed up for my chassis kit and did not realize that
in its current form may not fit properly I need to clarify things for everyone.

I have mentioned it elsewhere but we only touched on it briefly but as it has been said
the parks 2.0 is narrower in the bottom shell making my current chassis just a few
millimeters to large for the bottom half.
Also because of the threading there is less room length wise in the bottom.

I do have a 2.0 specific chassis in the works but may be waiting until I get one of the
2.0 hilts in hand to verify sizes and fitment before producing them because I'm not
sure if I want to do just the 1/2 chassis that will utilize parks new inner threaded top
end adapter included with the hilt or if I want to replace it with my own set-up like
I currently make. :undecided:

Much of that will be determined by the shell integrity and if the threading need to be
replaced or omitted for other attachments.

Ideally I will do both but... and have a full replacement unit like my current chassis
as well as a 1/2 unit for a more "dueling" single cell NB CS chassis.
Again I'd prefer to have it in hand until I do any actual production for it.


For the other Replicas like Romans or the Stainless steel version and possibly another
replicas form one or more guild members  :wink: those will all work with my chassis just
as a normal vintage would.



Feel free to ask questions and If you would like to be notified of these kits once they
are ready please post your interest here as well. :wink:

Thank you for your continued interest in my graflex products and enthusiasm for fx-sabers
MTFBWY
always
YODA
 :yoda:

Layout Rendering for FX-SABERS 2.0 Graflex Chassis kit
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi201.photobucket.com%2Falbums%2Faa60%2FFX-SABERS%2FFX-SABERS%2520DIY%2520Chassis%2520Kits%2FGraflex%2520Chassis%25202%2520render_zpsslem8bb0.jpg&hash=3e7f49d57a5394d2c5a0c39edb1a92f93c1b0406) (http://s201.photobucket.com/user/FX-SABERS/media/FX-SABERS%20DIY%20Chassis%20Kits/Graflex%20Chassis%202%20render_zpsslem8bb0.jpg.html)

The inquiry/interest list for Chassis Kits

1. NateWitt1

2.Templeofthebluegrass

3.Onli-Won Kanomi

4.Knibbsey

5.tullfan81

6.tomleech

7.MikeyX

8.Burty

9.Mewgen

10.jcroscigno

11.Whi-ja

12.SeoN8

13.Padawan311

14.Obi-wan Shaughnobi

15.Johannes Huber

16.DXistenz

17.JetSetWilly

18.Negotiator95

19.GreaSyde

20.Cat Chopsticks

21.maxjive

22.vsutherland01

23.Yeahkess

24.ShadyCanuck

25.Phantom Ren

26.jamiemp

27.Sithstalker2199

28.Chirish823

29.oswaldkefo

30.Tompouce

31.DarthBen123

32.The Force Is Strong

33.Yubnub

34.Sythen_Kharr

35.Mcbaine

36.Spike311

37.ganngy1

38.kendavis

39.Fodabear

40.jugnor



Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: TempleoftheBluegrass on October 02, 2015, 07:36:54 PM
I would be interested in one of these for sure!   I will have to have one of each!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Yoda on October 02, 2015, 08:00:53 PM
I would be interested in one of these for sure!   I will have to have one of each!

I'll note that in here and start a pre list as NateWitt1 is the first to inquire for it




Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Onli-Won Kanomi on October 03, 2015, 06:20:37 AM
Would your proposed "1/2 unit for a more "dueling" single cell NB CS chassis" have room for a crystal chamber? Perhaps under the NB if the battery could be placed in the forward threaded area? If so count me in - a combination of Yoda crystal chassis and the more deuelable threaded Graflex 2.0 sounds like a "best of all worlds" epic Win to me!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Yoda on October 03, 2015, 01:54:35 PM
Would your proposed "1/2 unit for a more "dueling" single cell NB CS chassis" have room for a crystal chamber? Perhaps under the NB if the battery could be placed in the forward threaded area? If so count me in - a combination of Yoda crystal chassis and the more deuelable threaded Graflex 2.0 sounds like a "best of all worlds" epic Win to me!

thank you Onli-wan and though it may be a bit different than that I'll count you in :wink:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Knibbsy on October 03, 2015, 05:37:25 PM
I would like to put my name down once I have the Korbanth's graflex 2.0 in hand.
Regards Knibbsy :cheesy:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Onli-Won Kanomi on October 03, 2015, 07:50:28 PM
Thanks so much Master Yoda.  :grin:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Yoda on October 04, 2015, 01:29:26 PM
I would like to put my name down once I have the Korbanth's graflex 2.0 in hand.
Regards Knibbsy :cheesy:

Added you on there I did :yoda:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: tullfan81 on October 09, 2015, 04:40:50 PM
Is there even a ballpark price for these?  The chassis is the one piece I have a hard time with and if I can buy a couple for my Korbanth sabers it would make my life so much easier.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Yoda on October 09, 2015, 04:48:07 PM
Is there even a ballpark price for these?  The chassis is the one piece I have a hard time with and if I can buy a couple for my Korbanth sabers it would make my life so much easier.

Not quite yet but I will post that information once I have a better idea as to what all I'm including with it or not.
I can assure you it will definitely be less than a full kit for standard graflexs :wink: :wink:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: tomleech on October 09, 2015, 08:03:46 PM
I'd be interested :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: MikeyX on October 11, 2015, 04:12:44 AM
I'm also interested :)

Thanks!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Burty on October 11, 2015, 04:15:38 AM
Amazing! Definitely put me down for one.
Many thanks.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Mewgen on October 12, 2015, 10:59:19 AM
Please put me down for notification. Would love to see this when the kits are ready.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Yoda on October 12, 2015, 11:45:46 AM
Hello everyone

I have updated the interest list with your names :cool:

Thank you

MTFBWY
always
YODA
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: jcroscigno on October 22, 2015, 10:40:37 AM
I'm probably not going to do a full dueling-type saber with the Graflex 2.0
Having recently discovered the adafruit fx board (1.9" x 0.85") I'm thinking it would be fun to have a display piece with lit crystal chamber and a few tact-switch activated sound effects. To me, it sounds like this goes along more with the 1/2 chassis being referenced, so I suppose that's the one I'm interested in.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Yoda on October 22, 2015, 01:26:33 PM
No problem and I'll update the list with additional names.

Right now I'm working to get my prototype done and have pics up once its ready :cool:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Whi-ja on October 23, 2015, 01:29:48 AM
I'm definitely interested depending on price and which types of boards your chassis will have the options of supporting.

Thanks for your work!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: SeoN8 on October 24, 2015, 12:19:44 AM
If I'm able to get on the Graflex 2.0 run, I'd definitely be interested :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Padawan311 on November 03, 2015, 06:34:43 AM
I am definitely interested in a chassis for the 2.0!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Obi-wan Shaughnobi on November 12, 2015, 04:44:00 PM
Please add me to the list as well for the new 2.0 Chassis kit, Yoda...thank you!!!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Johannes Huber on November 12, 2015, 04:56:22 PM
If by any chance a space might yet be added, I would be very interested. Thank you for your continuing efforts to make the light saber truly the "...elegant weapon..." we first saw back in '77
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: DXistenz on November 12, 2015, 05:24:00 PM
If there is room for more, I would be interested also.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: JetSetWilly on November 19, 2015, 05:33:20 AM
I'd like to do a reveal with my graflex 2.0, please put me down for one. Thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Negotiator95 on November 19, 2015, 09:11:46 AM
I'd be interested as well, put my name down good sir!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: GreaSyde on November 20, 2015, 06:24:12 AM
I'm in for a half but only if it implements the exposed crystal.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: Cat Chopsticks on November 20, 2015, 12:27:12 PM
I'm also interested. Please keep me posted :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
Post by: maxjive on November 27, 2015, 10:24:35 AM
Definitely interested, please notify me when there are pics, schematics, or pricing info.  Thanks!!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yoda on December 03, 2015, 03:05:47 PM
Hello everyone

I have attached a preliminary rendering of the 2.0 kit that I am making for the Parks 2.0 Graflex
tot he first post in this topic as well as here.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi201.photobucket.com%2Falbums%2Faa60%2FFX-SABERS%2FFX-SABERS%2520DIY%2520Chassis%2520Kits%2FGraflex%2520Chassis%25202%2520render_zpsslem8bb0.jpg&hash=3e7f49d57a5394d2c5a0c39edb1a92f93c1b0406) (http://s201.photobucket.com/user/FX-SABERS/media/FX-SABERS%20DIY%20Chassis%20Kits/Graflex%20Chassis%202%20render_zpsslem8bb0.jpg.html)

Again, once I have a hilt in hand and verify some assembly and dimensions etc... I will be
making the files for cutting/production.

Please keep in mind I have to order material, make the initial prototypes and do any adjustments
before production kits, along with an assembly manual.

Go ahead and continue to post interest here as I will update the list before I get kits produced.

It will take a few weeks to get it all together, so Please be patient as I feel they will be worth the wait :cool:

MTFBWY
always
YODA
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Obi-wan Shaughnobi on December 03, 2015, 04:49:57 PM
Yoda, WOW!!!! It looks amazing....I definitely, 100% want one!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: vsutherland01 on December 03, 2015, 09:10:57 PM
I want one of these! How much will they be?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Padawan311 on December 04, 2015, 05:38:36 AM
This looks great! I cant wait to see more! Are you making a Non-Crystal Chamber Version as well? I am interested either way!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Onli-Won Kanomi on December 04, 2015, 09:59:39 AM
VERY nice indeed...definitely still "in" for one of these! :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yoda on December 07, 2015, 10:39:12 AM
Thank you for the compliments everyone

I want one of these! How much will they be?

Not sure on an "exact price" yet since I still need to make prototypes
but I am working to insure they cost less than the 2.0 hilt it self
in order to keep it an affordable alternative to a genuine graflex
with a full chassis :wink:

This looks great! I cant wait to see more! Are you making a Non-Crystal Chamber Version as well? I am interested either way!
Not sure about a non chamber set-up however, it is going to be a modular construction
as with all my chassis so it could be something that can be altered, but... First things first  :wink:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: vsutherland01 on December 07, 2015, 10:47:12 AM
Cost sounds great! I have a TCSS chassis rigged up for my initial build but I always knew I would be upgrading it to have one of your kits for crystal chamber. Does your chassis fit a Nano Biscotte?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yoda on December 07, 2015, 10:53:24 AM
Cost sounds great! I have a TCSS chassis rigged up for my initial build but I always knew I would be upgrading it to have one of your kits for crystal chamber. Does your chassis fit a Nano Biscotte?



Thank you for the compliments :cool: and yes it is designed to fit the Nano Biscotti and Crystal Shard boards :wink:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yeahkess on December 07, 2015, 12:18:47 PM
i want this please  :cry:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: ShadyCanuck on December 07, 2015, 01:38:08 PM
Interested  :cool:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Phantom Ren on December 10, 2015, 07:58:10 PM
Can you put me on your list of requested Chasis. Also I just ordered the Korbanth's Kylo Ren hilt and was thinking that it would be cool if I can get a crystal chasis in the hilt. It has a 7/8 inside diameter. Do you think I may be able to fit one of your chasis inside? 
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: jamiemp on December 11, 2015, 08:23:20 PM
I'm in for one pending final price.
I've always admired these!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sithstalker2199 on December 13, 2015, 09:07:38 PM
I'd definitely love to have this for my Graflex 2...Sign me up please .
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Chirish823 on December 14, 2015, 10:54:30 AM
Hi Yoda,

I would be very interested in the new chassis for the Graflex 2.0.

Thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Chirish823 on December 18, 2015, 06:06:50 PM
Hi Yoda, I would be very interesting in your new chassis for Graflex 2.0.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: oswaldkefo on December 18, 2015, 11:27:52 PM
These look beautiful! I am definitely interested, but I would need to know the final cost before committing.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Tompouce on December 19, 2015, 05:17:35 AM
Hello !


It seems geat but i have to understand things (Sry i'm new ^^)

If i want to build luke's saber with crystal chamber, i'll have to buy

- This kit
- A graflex replica, which one ?

Thanks you !

Best regards,
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Onli-Won Kanomi on December 19, 2015, 07:22:38 PM
THIS kit is designed for the Korbanth [Sith Planet] "Graflex 2.0" replica kit run Graflex 2.0 saber run- Prototype pics now in hand - page 19 (http://www.fx-sabers.com/forum/index.php?topic=46738.0) which is now delivering to customers...there are still some available AFAIK but you might want to PM Randy [Korbanth] soon if you want one since it seems like they are selling quickly.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: DarthBen123 on December 20, 2015, 04:57:33 PM
Interestes!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: The Force Is Strong on December 20, 2015, 05:06:58 PM
Interested and would like to purchase depending on final price and if it is a full or 1/2 chassis.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yubnub on December 21, 2015, 11:00:21 PM
Very interested!

Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sythen_Kharr on December 22, 2015, 02:44:54 PM
Very interested in one
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Mcbaine on December 23, 2015, 03:12:38 AM
Please put me down for one too! My Korbanth Graflex 2.0 is on its way :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Spike311 on December 23, 2015, 01:39:39 PM
I too am very interested. My Korbanth 2.0 will be here soon enough. I will be using a NB V2 with PEx if that matters.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: ganngy1 on December 24, 2015, 06:03:48 AM
I am very interested! Please add me to the list.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: kendavis on December 24, 2015, 11:20:45 PM
I just got a 2.0 hilt kit, so I'm likely to need one of these to put it all together right. 
What is the cost for this again?

--Ken
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Fodabear on December 25, 2015, 03:49:58 AM
Ill be getting my 2.0 soon, so count me in!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: jugnor on December 26, 2015, 06:57:47 AM
I'm interested too.

But need to see it and specification first.

Jugnor
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Phantom Ren on December 26, 2015, 09:13:51 PM
please add me to your list of interested buyers for the Korbanth DIY Chassis Kit. Will most definitely purchase. already bought my hilt.

please inbox me if necessary.   

-Phantom Ren
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached) 2016
Post by: Yoda on December 27, 2015, 04:38:43 PM
Hello everyone

I have updated the list for 2.0 kits

I will be updating this topic as prototypes are made and
obviously to contact people once kits are ready. :wink:

Please be patient as the holidays always do they delay
shipping and so I've got parts coming etc... for
prototyping the first ones so I can move forward with
producing them for everyone.

MTFBWY
always
YODA



Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: rhsu on December 28, 2015, 07:18:22 AM
Please put me down for one too   :azn:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Shokengou311 on December 28, 2015, 08:54:00 AM
count me in!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: wyattburp on December 28, 2015, 11:45:47 AM
Count me down for one.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Zagman on December 28, 2015, 09:06:49 PM
Id like to  included on this!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: adamo2817 on December 29, 2015, 01:29:14 AM
Hi there, I am very new to all of this and would love to know which of the following Graflex from parks sabers I should get with your chassis/ crystal

focus as there are 3 versions of the Graflex ESB on his website. The 2.0 kit which are just the parts of the graflex which I would have to put together

myself, the original graflex ESB hilt which Jeff Parks inisists NOT to convert at all and the 2.0 phase saber as well. I really hope you can help me in

picking the right one as hopefully i can order the famous kit of yours as well. Kind Regards from London, UK.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: AiRTiMe34 on December 29, 2015, 01:31:17 AM
Add me to the list of interested parties, please.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sythen_Kharr on December 29, 2015, 05:49:25 PM
Hi there, I am very new to all of this and would love to know which of the following Graflex from parks sabers I should get with your chassis/ crystal

focus as there are 3 versions of the Graflex ESB on his website. The 2.0 kit which are just the parts of the graflex which I would have to put together

myself, the original graflex ESB hilt which Jeff Parks inisists NOT to convert at all and the 2.0 phase saber as well. I really hope you can help me in

picking the right one as hopefully i can order the famous kit of yours as well. Kind Regards from London, UK.

2.0 Kit includes everything you need to make a empty hilt of one of the three movie versions (ANH,ESB,THA)

Graflex ESB are both the same?, They use his own (Phase)LED lighting(which has LEDs through out the blade )has no sound as far as I am aware,and is made as is.
(correct me if I am wrong)


Getting the 2.0 kit is the way to go, especially if you want to use Yoda's (or Darth Ryo's 3d printed version) chassis kit. As they are made for a few options of

soundboards (the Nano Biscotte or Crystal Shard from Plector Labs) but going this route will require you to also buy other parts that might be costly.

Graflex 2.0 saber run- Prototype pics now in hand - page 19 (http://www.fx-sabers.com/forum/index.php?topic=46738.0) for more info
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Zagman on December 29, 2015, 09:09:46 PM
I would like to be put on the list for the Park 2.0.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Warayn on December 29, 2015, 11:10:58 PM
I am interested for the chassis that fits the Korbanth Graflex 2.0. I do have a few newb questions. 1) lights for the top of the hilt, where the blade would come out, is that a separate kit? 2) And sound, what would be a good way to go on that? 
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Cad-Bayne on December 30, 2015, 05:12:17 AM
Please add me to the interest list for the Korbanth 2.0  chassis.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: exdee on December 30, 2015, 01:22:54 PM
Count me in as well!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: arviter91 on December 30, 2015, 05:39:45 PM
Got one of the last 2.0's.. Whew. I'd like to be included as well :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Phantom Ren on December 30, 2015, 07:08:08 PM
Again... count me in. I'll be on the lookout for your list.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jdubs on December 31, 2015, 02:58:25 AM
Hello, very interested depending on price!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: msasin on December 31, 2015, 10:07:42 PM
Im interested in one of your kits. Please add me to your list. Thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: darklordkasim on January 01, 2016, 05:07:21 AM
I would be interested in one of these kits, thanks.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: dk0r on January 01, 2016, 12:21:36 PM
Will purchase --please add me to the list. Thanks!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: dk0r on January 01, 2016, 12:48:22 PM
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi201.photobucket.com%2Falbums%2Faa60%2FFX-SABERS%2FFX-SABERS%2520DIY%2520Chassis%2520Kits%2FGraflex%2520Chassis%25202%2520render_zpsslem8bb0.jpg&hash=3e7f49d57a5394d2c5a0c39edb1a92f93c1b0406) (http://s201.photobucket.com/user/FX-SABERS/media/FX-SABERS%20DIY%20Chassis%20Kits/Graflex%20Chassis%202%20render_zpsslem8bb0.jpg.html)

I'm new to the scene here so I would like to confirm the following:

1) Is the new chassis kit that yoda depicted above essentially just the crystal core saber chassis kit (http://i201.photobucket.com/albums/aa60/FX-SABERS/FX-SABERS%20DIY%20Chassis%20Kits/5ChassisADpg5online.jpg) (shown below) that has been modified to fit within the new graflex-2.0's dimensions?
2) As I understand it, the graflex-2.0 from Parks and Korbanth are the same. Just to be certain, would someone please confirm that the new chassis kit being discussed in this thread will fit Korbanth's graflex-2.0?
3) Will the new chassis kit come preassembled?
4) If not, will all the necessary hardware and electronics be included for assembly?

Thanks!

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi201.photobucket.com%2Falbums%2Faa60%2FFX-SABERS%2FFX-SABERS%2520DIY%2520Chassis%2520Kits%2F5ChassisADpg5online.jpg&hash=dda066952206ab35e7dac3812043b284c833eccb)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Kingmob on January 01, 2016, 02:04:25 PM
Have one of Korbanth's Graflexs on order on the RPF. Interested in one of these kits as well.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sythen_Kharr on January 01, 2016, 06:34:38 PM
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi201.photobucket.com%2Falbums%2Faa60%2FFX-SABERS%2FFX-SABERS%2520DIY%2520Chassis%2520Kits%2FGraflex%2520Chassis%25202%2520render_zpsslem8bb0.jpg&hash=3e7f49d57a5394d2c5a0c39edb1a92f93c1b0406) (http://s201.photobucket.com/user/FX-SABERS/media/FX-SABERS%20DIY%20Chassis%20Kits/Graflex%20Chassis%202%20render_zpsslem8bb0.jpg.html)

I'm new to the scene here so I would like to confirm the following:
1) Is the new chassis kit that yoda depicted above essentially just the crystal core saber chassis kit (shown below) that has been modified to fit within the new graflex-2.0's dimensions?
2) As I understand it, the graflex-2.0 from Parks and Korbanth are the same. Just to be certain, would someone please confirm that the new chassis kit being discussed in this thread will fit Korbanth's graflex-2.0?
3) Will the new chassis kit come preassembled?
4) If not, will all the necessary hardware and electronics be included for assembly?

Thanks!

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi201.photobucket.com%2Falbums%2Faa60%2FFX-SABERS%2FFX-SABERS%2520DIY%2520Chassis%2520Kits%2F5ChassisADpg5online.jpg&hash=dda066952206ab35e7dac3812043b284c833eccb)


1)Yes, I am sure there will be some revisions because of the ROTJ grip part that threads to the bottom part of the hilt. Also Yoda stated that he wanted it to be cheaper, that it was less then the price of the Graflex 2.0 itself, that being said I don't know if it will lack the more complicated details or not.

2)From my understanding they are one in the same, tho I was thinking the other day because the parks website diagram shows bunny ears being disassembled and comes with the pins for the grips, and the pics that I have seen of the "Korbanth" posts don't show those features.

3)Most likely you will have to assemble it yourself.

4) I assume similar to. this http://i201.photobucket.com/albums/aa60/FX-SABERS/FX-SABERS%20DIY%20Chassis%20Kits/ChassisADPg6online.jpg (http://i201.photobucket.com/albums/aa60/FX-SABERS/FX-SABERS%20DIY%20Chassis%20Kits/ChassisADPg6online.jpg)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Delta38 on January 01, 2016, 11:37:40 PM
Please add me to the list master 8) Can't wait to finally give this flash gun a facelift 8p
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yoda on January 02, 2016, 01:25:03 PM
Hello everyone

Thank you for posting your interest and please continue to do so as I get this new kit completed.

It will be similar to the existing kits for assembly but various aspects are being made easier to do
as well as updating the over all look.

The kit will come with everything necessary to assemble it (not including tools) and install it into
the parks hilt with instructions on chassis assembly and hilt installation etc... :cool:

Again because of the Holidays some suppliers shut down so I'll have material coming soon and be able
to get back on producing prototypes ASAP.

I will consolidate and update the list with those who post interest once I'm closer to having
actual prototypes ready to show.

MTFBWY
always
YODA
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Tulsah on January 02, 2016, 03:58:33 PM
Please add me to the list Master Yoda.  Thanks.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: CoronaMyke on January 03, 2016, 12:38:41 PM
Please count me in for a kit!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: lordtalix on January 03, 2016, 07:37:54 PM
Definitely interested.  I should be receiving my Korbanth Graflex 2.0 kit any day now.  Please put me on your list.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Brad1981 on January 03, 2016, 07:49:16 PM
Hello...please add me to the purchase list for the chassis 2.0 as well.  Thanks!

-Brad1981
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: johsi on January 03, 2016, 08:23:00 PM
Please count me in as well!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: coldvizjerei on January 04, 2016, 05:43:17 AM
Definitely interested, count me in!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: sketcherdan on January 04, 2016, 01:26:12 PM
Interested, please count me in :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sythen_Kharr on January 05, 2016, 05:03:31 AM
The suspense is killing me. "scratches arm"

Can't wait
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: djdanny402 on January 05, 2016, 01:23:02 PM
Please add me to the list!
and disregard my post for the vintage graflex,i did not realize the fitment issue!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: redhead3031 on January 05, 2016, 03:40:15 PM
In an earlier post you mentioned Nano Biscotti and Crystal Shard compatibility. Will this chassis be compatible with Crystal Focus boards?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: coldvizjerei on January 05, 2016, 03:56:05 PM
In an earlier post you mentioned Nano Biscotti and Crystal Shard compatibility. Will this chassis be compatible with Crystal Focus boards?

Would like to know this too. Either way, I'm still in!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: webbsy on January 05, 2016, 05:52:23 PM
hi please add me to the list pending price.

thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: GreaSyde on January 05, 2016, 11:09:54 PM
I might be a little late for this, (for the third time) but if there is a standby list count me in and take my money!

Crystal Focus or Bust!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: ThePawn on January 05, 2016, 11:55:13 PM
Yoda, put me down for three if your making extra's.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: iamninjamoose on January 06, 2016, 12:02:53 AM
I just received my Korbanth Graflex 2.0 yesterday. Am I too late to get in on the interested list for this chasis?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Kaiozero on January 06, 2016, 02:11:15 AM
Please add me to the list Master Yoda.

Thankyou mtfbwy.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Scottm2815 on January 06, 2016, 03:38:03 AM
Any chance a late comer such as myself could be included in this please? I have my Kit on order as well as a few electronics including the nano biscotte V2 :)

I'm actually tempted to order 2 as I have another kit on order with Park sabers.

Thank you
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: rwarren on January 06, 2016, 05:59:59 AM
Please add me to the list of interested buyers.

Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Kontherun on January 06, 2016, 07:46:12 AM
I'm definitely interested. I have three 2.0 kits and want to make different versions. One or two reveal and one with a detachable blade. I assume its not possible to have both (reveal and blade) in the same sabre?
Regarding sound, will there be a recommendation when things are more progressed?
This is my first light sabre build, so I need all the help I can get.   :rolleyes:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: thecentennial on January 06, 2016, 09:23:38 AM
Would love to buy a full chassis kit, just bought a korbanth graflex 2.0. Please let me know if it is possible.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Brad1981 on January 06, 2016, 11:34:52 AM
I apologize.  Can you take me off the list?  Thanks!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Remote People on January 06, 2016, 01:54:43 PM
Yoda-

Would love to be on your list. Please could you add me?
Thanks.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Orivon on January 06, 2016, 06:07:55 PM
Count me in!! I just ordered my Graflex 2.0 today, can't wait to build it!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: ThePawn on January 06, 2016, 07:50:02 PM
I'm interested in three kits for all three versions of Luke's GRAFLEX Lightsabers, ANH, ESB, TFA.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: velmar on January 06, 2016, 09:28:46 PM
Please add me to the list of interested buyers.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: RevanReborn on January 07, 2016, 10:50:48 AM
 Greeting Yoda :).   I don't suppose you planned on making like over 900 of these gorgeous  chassis' did you lol?  Cause if so I'd certainly love to get on that list!  I've got a Parks 2.0 on the way and I'd literally gnaw off my controlling hand for one- hah, beat that NateWit1!  No, ok, but seriously now, do you take bribes lol?  Jk... Or am I lol?  :cool:   

MTFBWY, and seriously, even if I never make it on any lists, infinite respect to you, sir, for being able to make such a breathtaking piece :). 
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Zark on January 08, 2016, 12:18:13 AM
Please add me to the list. Thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: jdunn363 on January 08, 2016, 02:42:07 AM
Jot me down good sir.
And to my understanding these arend board specific and will fit most plecter boards?
I have both of my 2.0 kits working, one with my own custom chassis and another with ryos chassis. Definetly want this one. Keep us posted
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: IceSaber on January 08, 2016, 04:01:48 AM
Your work is amazing. I'm interested but I need some clarification from one of you more knowledgable people if thats okay.
I doublt ill be doing any conversion work myself because I simply lack the skills and tools. If I were to buy Korbanth's new Graflex 2.0 hilt ($195), is there a somebody who can do a full install using the crystal chamber kit, and everything else I'd need to make it a fully functional saber? (i.e. blade, sound, battery etc.).

Finally, what is the rough ballpark price for these services? I've read on one of your previous threads that a "complete system" (assuming its everything stated above) was $1900+.

Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: 43moon on January 09, 2016, 07:45:18 AM
Sign me up for one!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: candylad on January 09, 2016, 07:59:27 AM
I would love to get in on this if I still can!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Stephan2312 on January 09, 2016, 01:46:40 PM
This looks awesome. Sign me up for one as well!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jedi Dad on January 09, 2016, 09:33:04 PM
I'm in! Please add me to the list as well.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: roguegeek on January 10, 2016, 12:54:29 AM
Greetings, Yoda. Absolutely sign me up for one. Thank you very much for your contributions!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: TheBaron on January 11, 2016, 09:19:12 AM
Hi Yoda, brand new (newb) member here. I emailed you yesterday, but I've since discovered (and ordered) the Korbanth 2.0 kit. Can you please add me to list for 1 chassis kit?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: keikun17 on January 11, 2016, 04:52:50 PM
Add me to the list if to does crystal! keikun17
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: anchonee on January 12, 2016, 12:49:18 AM
Sign me up for the chassis kit!

Thanks!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jamielov on January 12, 2016, 11:39:33 AM
Please add me for one chassis kit
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jamielov on January 12, 2016, 11:43:32 AM
Sorry double post!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: djdanny402 on January 12, 2016, 02:01:28 PM
Any ETA on when these will be released around?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: helicopters on January 12, 2016, 04:02:57 PM
I would also like to be added to the waiting list for the Parks 2.0 Graflex Chassis
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: DeuceMan_408 on January 12, 2016, 04:46:47 PM
I also would like to be on list please.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Razorwing on January 12, 2016, 07:31:31 PM
I just bought a Korbanth Graflex 2.0..so I am interested! Also is there need to have any assembly? Or is it plug and play? I would hope it's plug and play because I know nothing about electronics or have the tools to do it.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Replicant on January 12, 2016, 07:58:35 PM
I am very interested in this. I am a noob when it comes to this so I have some questions. Will the chassis be ready to install, or do I have to assemble it? Also, what other parts beside blade, sound card, batteries, and speaker are needed to complete the saber?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Spark on January 13, 2016, 12:12:47 AM
I am interested in this.

Will the price point be the same as the other? This seems like the best out there!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: insomnio on January 13, 2016, 12:21:45 PM
I have a parks esb, i interesed but i don't find the price of the kit in the forum...
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: coldvizjerei on January 13, 2016, 12:24:38 PM
I have a parks esb, i interesed but i don't find the price of the kit in the forum...
No price just yet, Yoda is still working on it.
This is just an interest thread at the moment.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: LukeStarkiller on January 13, 2016, 02:05:19 PM
PLEASE add me to the list. I have already ordered the Korbanth Graflex 2.0 and would love to get this revised chassis kit. I am ready to buy as soon as it becomes available!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: maga33 on January 14, 2016, 03:13:59 PM
If it is not too late, I am interested in a chassis kit as well. Please add me to the list!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jamielov on January 14, 2016, 03:16:02 PM
Noob question: im having one of the best installers do setup already on my 2.0 kit.  Setup as follows:

 White FOC with tri Cree LED of blue/royal blue/white, the blue/royal blue will mix for a TFA blue with the white for FOC. For sounds Graflex V HD sound font from saberfont.com

With the crystal chassis, can the same "parts" (led/speaker/sound) be used or would i be starting from scratch? 
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Ariannus on January 14, 2016, 03:18:05 PM
I would like to be added to the waiting list.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: richlaw77 on January 14, 2016, 04:31:17 PM
i would like to be added to the list as well
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: ewokian on January 14, 2016, 07:37:02 PM
I just bought a Korbanth Graflex 2.0..so I am interested! Also is there need to have any assembly? Or is it plug and play? I would hope it's plug and play because I know nothing about electronics or have the tools to do it.
Basically, what he said. :) Interested and I'd like some insight about building/installation, please.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: casper2341 on January 14, 2016, 07:45:43 PM
Would like to be added to the list please.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sythen_Kharr on January 14, 2016, 08:51:41 PM
I am so thirsty for an update
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: DarkSideTendencies on January 14, 2016, 10:20:07 PM
Would like to be on the list. Perfect way to complete one of my soon to arrive 2.0 kits.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: DarkSideTendencies on January 14, 2016, 10:30:34 PM
!!!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Nays on January 15, 2016, 06:59:36 AM
Interested!!!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Dracku on January 15, 2016, 08:52:49 AM
Please add me to the list of those interested.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: TrypWyr on January 15, 2016, 01:59:21 PM
Was there a price estimated for the 2.0 kit yet? I'm interested, depending on the cost.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Ashlin Fisk on January 15, 2016, 07:56:41 PM
I am pretty new to the forum, and I would like to know how to find out prices. So if this is a n00b question, please tell me. I would like to know the price of this chassis.

Thanks, and may the force be with you.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Stromfire on January 16, 2016, 11:44:49 AM
Please add me to the list - I just ordered my 2.0 from Korbanth.

Thanks.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: neurosean on January 16, 2016, 01:44:09 PM
Definitely interested in one of these as well. Please add me to the interest list.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: oneeyedgiant on January 16, 2016, 01:58:37 PM
Guys, will this chassis kit work with a Genuine Graflex? 
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: The Force Is Strong on January 16, 2016, 02:05:09 PM
Do not believe so. Yoda has those selling in a different thread. It is possible I guess depending on how it is designed and what is replaces that comes standard with the 2.0.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: ShiftyScarecrow on January 16, 2016, 11:38:52 PM
I too would like to be added to the list
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Stormshadow969 on January 17, 2016, 02:32:42 AM
I am new to forum.  but I too would like to buy 3 chasis kits for Korbanth latest 2.0 graflex kits..and also 3 for Romans Obi saber kits...please let me know via email or message or however..and I assume paypal worlks...sry if I sound dumb, as I said just new here...--Thomas

Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: ParliamentRook on January 17, 2016, 05:32:52 AM
I'm 100% interested in one, please add me to the list! Fantastic work.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: takeshiep on January 17, 2016, 07:06:15 AM
Please add me to the list, please!!!I'm ready to purchase.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Spchaser on January 17, 2016, 10:15:55 PM
Hi yoda,
I'm interested In a chassis for an old graflex replica I bought nearly a decade ago... Not sure who made it. Want to talk to you. Please PM me
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: roguegeek on January 17, 2016, 10:32:55 PM
How's it going, yoda? I think I speak for many when I ask if there is any update on this project.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Scottm2815 on January 18, 2016, 02:46:46 AM
Hi Yoda,

Sorry about this but can I drop out of this run please. I believe this chassis is designed as a Crystal reveal? I'm not planning on doing crystal reveals with my sabers so I've decided to go an alternative route.

Cheers

Scott
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Markgarcia10 on January 18, 2016, 10:08:19 AM
I just bought a korbanth hilt and want to know if I can get in on this chassis . I would appreciate it
Thanks, mark
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Laserrr on January 18, 2016, 10:15:34 AM
I'm in for the chassis if it fits the Korbanth Graflex 2.0 I just ordered... thanks... AMAZING WORK...   :cool:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jamielov on January 18, 2016, 01:31:36 PM
I asked this earlier, and never got an answer, so I'll try again.  Theoretically, if one has a 2.0 built already, does this kit utilize the existing parts one has (led, sound card, speaker, etc?).  I love the cuatom install i had done on mine, and would certainly love a crystal reveal, but i cant figure out if i need all new internals specifically for this chassis?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Shpider on January 18, 2016, 10:12:57 PM
I too would like to be added to the list please.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: mrtoad883 on January 20, 2016, 12:26:40 AM
Hey Yoda! Just ordered my parks 2.0 from korbanth. Count me in for your chassis please!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Genesis9 on January 20, 2016, 12:48:34 AM
I'm also interested.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sythen_Kharr on January 20, 2016, 01:20:32 AM
How's it going, yoda? I think I speak for many when I ask if there is any update on this project.

So so thirsty for an update.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: IceSaber on January 20, 2016, 05:14:40 AM
I'm a little confused with soundboard compatibility. The Chassis thread sticky says "Soundboards and Led Drivers Measuring 30mm W x 58mm L x .15mm H (or less)" but all of the soundboards from Plectar measure at least 4mm in Height. Is that a typo?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: biggs79 on January 20, 2016, 01:39:07 PM
Hi yoda

Happy new year!

I would like to be added to your list as interested in buying the chassis for the 2.0, look forward to your update!

All the best from the UK
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jamielov on January 20, 2016, 05:09:53 PM
Yoda...any chance on a quick update?  Even to pop in and let us know its close or still way off?  Im sure a lot of us would enjoy any news... You def have our undivided attention! 
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: IceSaber on January 21, 2016, 02:12:59 AM
I asked this earlier, and never got an answer, so I'll try again.  Theoretically, if one has a 2.0 built already, does this kit utilize the existing parts one has (led, sound card, speaker, etc?).  I love the cuatom install i had done on mine, and would certainly love a crystal reveal, but i cant figure out if i need all new internals specifically for this chassis?

I'm fairly new to all of this too but I do know that you can definitely reuse some parts such as speaker and soundboard (provided it fits). I'm almost sure that it supports most LED's for the optics so that shouldn't be a problem.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached) 2016
Post by: dk0r on January 21, 2016, 08:08:03 AM
Last update from Yoda in this thread was from 27-December:

Hello everyone

I have updated the list for 2.0 kits

I will be updating this topic as prototypes are made and
obviously to contact people once kits are ready. :wink:

Please be patient as the holidays always do they delay
shipping and so I've got parts coming etc... for
prototyping the first ones so I can move forward with
producing them for everyone.

MTFBWY
always
YODA
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Nbaker22 on January 21, 2016, 12:41:20 PM
Are you still making the chassis kits for the 2.0? if so i would love to buy one.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: scimitar on January 21, 2016, 12:47:21 PM
I ordered my Graflex 2.0 earlier this week and am interested in a chassis kit. Thanks!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Rstynls on January 21, 2016, 01:47:01 PM
Very interested. Thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: atomsk on January 21, 2016, 06:33:19 PM
count me in for one! cant wait! :azn:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Gytheran on January 21, 2016, 07:36:11 PM
Also interested in one. :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: djdanny402 on January 22, 2016, 03:58:29 AM
Yoda!!!!! We need an update!!!!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: GalaxyM31 on January 23, 2016, 05:03:47 PM
I'm interested, but would like to know the price.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sini Star on January 23, 2016, 06:46:00 PM
Add me to the list yoda. Thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: tomm1999 on January 24, 2016, 03:39:51 AM
This is amazing, definitely interested.  please add me to the list
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Ikaros on January 24, 2016, 08:00:22 AM
I'm interested in this too. Didn't realize the Graflex 2.0 had different dimensions then the original ones.

Good to know!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Warayn on January 24, 2016, 12:24:41 PM
                                           Star Wars

                                          Episode VIII

                                Chassis Kit for Korbanth Graflex 2.0

               Yoda has VANISHED!! In the wake of the incredible success of the Korbanth
               Graflex 2.0, and the overwhelming demand of Yoda's AMAZING Chassis kit, no
               one has seen the Great Jedi Master.  Those who know him best speculate that
               retreated to his first temple in order to meditate on building another
               AWESOME chassis for his audience!


I'm kidding...I have no idea.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: IceSaber on January 25, 2016, 07:18:18 AM
I'd like to be put down for one of these kits with the larger crystals if possible please.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: djdanny402 on January 26, 2016, 06:28:08 AM
hes killen us with suspense!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Rabbott on January 28, 2016, 06:05:42 AM
Interested in chassis kit for parks 2.0 I have ordered. :grin:

Please add me to the list.
Thank you
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: jdunn363 on January 28, 2016, 05:42:08 PM
Any list updates? I'm really interested and want 2 of them
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: LordFreeMoon on January 30, 2016, 03:01:08 AM
Be patient guys, I'm pretty sure Yoda will give us some news as soon as it's ready  :cool:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Rule of Two on January 30, 2016, 10:42:13 AM
I would love one! This is exactly what I was looking for.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yoda on January 30, 2016, 05:30:13 PM
Hello everyone

I just posted a quick update in my 2016 updates topic but just in case some of you miss it I am
still working on this and have not disappeared  :laugh:

I've got much going on and am doing a few styling / fitting tweaks on this but hang in there
it is coming soon and I plan to work out selling with Saber guild members for retailing so
that I can produce them and get them to customers in a more timely fashion :cool:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: IceSaber on February 02, 2016, 08:14:58 AM
I thought I'd already put my name down but I can't find it! I'm in for one of these. Thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: coldvizjerei on February 02, 2016, 08:59:05 AM
Don't think Yoda updated the list, that's probably why.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jedi Dad on February 02, 2016, 03:21:29 PM
I'd like to be added to the list as well.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: sosolidjedi on February 02, 2016, 08:29:29 PM
YODA i should be receiving my 2 Graflex 2.0 hilts from Korbanth by the end of feb and would very much like to be added to the list for your amazing chassis 2.0 kits.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Modano1509 on February 07, 2016, 09:55:57 PM
I'm very interested in one of these too, as I just bought a Graflex 2.0 and am looking to make it a dueling/art piece.

Let me know if you're still taking names!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Mike_08 on February 09, 2016, 05:40:16 AM
Hope it's not to late to be added to the list? I've just put my order in for a Korbanth Graflex 2.0 and signed up to get one of these kits for it.  :grin:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Tylan Mallek on February 09, 2016, 09:54:02 PM
Hi Yoda. I am requesting a spot for a chassis as well. Thank you.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: therupert on February 11, 2016, 12:58:57 PM
Hi Yoda!

I'd like to be added to the list for a Chassis Kit for the 2.0 Korbanth as well please :)  Thanks!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Negotiator95 on February 11, 2016, 01:27:26 PM
Unfortunately I've decided to go with another chassis solution, so Yoda you can take my name off and shift everybody else up one spot or whichever solution works best for you.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: IceSaber on February 20, 2016, 05:07:32 AM
I've already mentioned I want to put my name down for one of these for my graflex 2.0 but if this will also fit a MPP 2.0 please put me down for another chassis too. Thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: GalaxyM31 on February 20, 2016, 05:31:03 AM
I'm down for one of the full chassis.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Stromfire on February 23, 2016, 01:06:08 PM
Just one question to all of you guys - who already got their Graflex 2.0:
Do you wait til Yoda releases his chamber - or do you go with another (chrystal chamber) solution?
I got my Graflex from Korbanth since Monday - almost all other parts (electronics) ready to assemble - and just don't know if I could stand to wait for an unknown time to get Yoda's chamber - with an unfinished saber in my hands...  :huh:

So what do you do?
Finish your Graflex without a chamber for the time being?
Go for another chamber solution - maybe to exchange it with Yoda's later?
Thanks - and have a great day
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: sketcherdan on February 23, 2016, 01:50:53 PM
Just one question to all of you guys - who already got their Graflex 2.0:
Do you wait til Yoda releases his chamber - or do you go with another (chrystal chamber) solution?
I got my Graflex from Korbanth since Monday - almost all other parts (electronics) ready to assemble - and just don't know if I could stand to wait for an unknown time to get Yoda's chamber - with an unfinished saber in my hands...  :huh:

So what do you do?
Finish your Graflex without a chamber for the time being?
Go for another chamber solution - maybe to exchange it with Yoda's later?
Thanks - and have a great day

Haha, I know what you mean, but I will say what I have always been told - have the patience of a jedi  :jediblue:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Elzilcho on February 23, 2016, 10:33:24 PM
Hey master Yoda,
  I would also like to voice my interest in obtaining a chassis kit from you (pending the details of course) many thanks,
Ken (#2)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: MikeyX on February 26, 2016, 11:10:43 AM
Just one question to all of you guys - who already got their Graflex 2.0:
Do you wait til Yoda releases his chamber - or do you go with another (chrystal chamber) solution?
I got my Graflex from Korbanth since Monday - almost all other parts (electronics) ready to assemble - and just don't know if I could stand to wait for an unknown time to get Yoda's chamber - with an unfinished saber in my hands...  :huh:

So what do you do?
Finish your Graflex without a chamber for the time being?
Go for another chamber solution - maybe to exchange it with Yoda's later?
Thanks - and have a great day

I'm just waiting patiently for the Yoda solution. I think it will be worth the wait, and in the meantime I just have the Korbanth as a static replica (the only changes I've made so far are to upgrade the circuit board and Kobold).
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Onli-Won Kanomi on March 01, 2016, 04:15:44 PM
Having been in this hobby awhile and seen the quality of his work over the years the Yoda chassis will definitely be worth the wait...of that I am absolutely certain.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: IceSaber on March 04, 2016, 06:07:38 AM
Does anybody have any idea when these will be available?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: GalaxyM31 on March 04, 2016, 06:22:10 AM
As far as we know, Yoda is still working on the prototype.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: erlomd on March 04, 2016, 09:00:25 AM
being new to the world of yoda chassis, whats the normal time frame on making these chassis? Im guessing it takes around 4-6months on overall design, making a prototype, and fulfilling at least half of the production run orders before they start being shipped out...?
I haven't ordered one, but just for future reference.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yoda on March 06, 2016, 04:48:51 PM
Having been in this hobby awhile and seen the quality of his work over the years the Yoda chassis will definitely be worth the wait...of that I am absolutely certain.

Thank you for that Onli-won  :cool:

being new to the world of yoda chassis, whats the normal time frame on making these chassis? Im guessing it takes around 4-6months on overall design, making a prototype, and fulfilling at least half of the production run orders before they start being shipped out...?
I haven't ordered one, but just for future reference.

Good question and I am sorry to you and others for the wait.

I would have this done already but I've had a lot going on after the release of TFA and I typically test
everything I make before making it available and make adjustments so that the final product that goes out
is both user friendly and I also have to like what I've created and feel it is a proper base to build on
for other similar items that will follow it.
I also like to work out any issues people may have ahead of time and include them in the instructions.
It is looking good though and I will be ready with it soon  :cool:

I have also had other things to do that have delayed its progress but those are getting finished
and I can move full steam on to this.

Although I will say I keep working on things each day and right now I'm testing a few switch
plate parts to make using the existing switches etc... that come with it easy to assemble and
work but also easy to disassemble if needed.

I have a feeling with this 2.0 hilt that it will be a first for many  :wink: and I want those people to
both enjoy the assembly and feel they have options with it so hang it there its coming :yoda:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: The Force Is Strong on March 06, 2016, 05:09:26 PM
Waiting anxiously but totally understand.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: coldvizjerei on March 06, 2016, 05:14:34 PM
I'm testing a few switch
plate parts to make using the existing switches etc... that come with it easy to assemble and
work but also easy to disassemble if needed.

I want those people to both enjoy the assembly and feel they have options with it so hang it there its coming :yoda:

Thanks for the update!
Huge props to you for making the extra effort to make sure that it can be easily assembled and disassembled; I'm sure it will be very much appreciated!  :smiley:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yoda on March 06, 2016, 05:30:20 PM
One of the things I will be focusing on this year is teaching people about building
with their DIY kits and systems.

I obviously can not build every single graflex out there and that is okay but I do
want to make sure that the knowledge I've gained over the years with vintages and
replicas (much can apply to the 2.0 and other hilts) will be followed for reliable
and successful builds.

There is a lot of info on the forums but I'll be making some specific to the Graflex
here in my Graflex section :cool:

Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Tabris on March 07, 2016, 12:19:08 AM
Hey there,

I might be interested too.

Cheers
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: joeyg91 on March 08, 2016, 12:08:38 AM
Hi Yoda,

Will this fit the roman props replica graflex? I hear it should be around the same size as a vintage one.

If it would, I would def like to get in on this, thanks :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: tomm1999 on March 08, 2016, 05:46:57 AM
Please add me as interested.  Thanks Yoda

This kit will fit the Parks 2.0.  His other kit (the vintage Graflex one) will fit the Romans. 
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Nbaker22 on March 09, 2016, 04:39:57 PM
Yeah add me as well. When you do start taking orders. I replied in this and another post a while back. Just checking every now and then for updates from you based on availability.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Socalsaberservice on March 10, 2016, 01:17:51 AM
I've been following this for some time now. I have G.O.T.H chassis' in mine for the time being. But please add me to the interest list for 2, and payment will be made as soon as they are completed. Thank you
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: joeyg91 on March 12, 2016, 09:40:50 AM
Please put me down for one, thanks. Looking forward to the photos and price!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: rbdv09 on March 15, 2016, 02:10:58 PM
Hi Yoda

I'm interested in a kit - please put me down. Thank you =]
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Darth_Paul on March 17, 2016, 07:20:17 PM
What is the difference between this chassis and the Darth Ryo one?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: DarkSideTendencies on March 17, 2016, 10:29:51 PM
Darth Ryo's are 3D printed chassis, Yoda hand builds his out of metal and such to make a sleek and awesome looking piece of art. Look up pictures of his Graflex chassis in other threads to see the difference.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: mancutd on March 18, 2016, 05:56:31 PM
Hi there Yoda. From the U.K here. Can you please add me to the interest list for 1 of your new Graflex 2.0 kits for a Korbanth hilt.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Darth_Paul on March 18, 2016, 06:00:24 PM
Just looked them up. I'd only ever paid attention to his sabers, which are obviously out of this world, but man those chassis are amazing as well. You're right - true works of art.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Rysandro on March 19, 2016, 10:10:18 PM
Signed up just to say that I'm interested!!

Ordered a Graflex 2.0 Kit from Korbanth today!!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Rysandro on March 21, 2016, 11:19:28 AM
Might be a dumb question but here goes.


The half chassis will have to retain the 7/8 blade correct?

Any chance the full chassis will include a 1" blade connection?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: roofless on March 21, 2016, 12:48:36 PM
I would like to be on the list to get one of these chassis.... Thanks yoda
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: kmcc505 on March 23, 2016, 08:46:55 AM
I want one, too, please. These look awesome.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: djdanny402 on March 23, 2016, 10:57:10 AM
killing us with the wait suspense yoda!!!!
all I need to complete my build lol
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Orivon on March 27, 2016, 05:45:43 PM
About how much would a chassis from Yoda cost? I'm interested but with all the other awesome saber stuff going on right now, I want to budget lol
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: huangjz on April 02, 2016, 12:06:23 AM
I would be very interested in the new chassis ,please  put me in.I will pay ASAP when the chasis have finished.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: djdanny402 on April 05, 2016, 03:51:21 AM
Would this chassis be compatible with the 1 inch blade holder some of us have chosen to go with or simply only will work with the 7/8 holder that came with the 2.0 kit?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Darth_Paul on April 07, 2016, 05:11:51 PM
Please add me to the list Yoda.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Darth Vidicus on April 10, 2016, 08:07:37 AM
I'm highly interested in one as well!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: johnjohnson on April 10, 2016, 09:17:36 AM
Just made an account to say that I am very interested in this as well!!! A little late to discovering this, hopefully not TOO late.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sohryu76 on April 11, 2016, 01:18:54 PM
Master Yoda,

May I be added to your notification list for your 2.0 Chassis please?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jynx on April 11, 2016, 01:21:24 PM
I am interested in this kit too
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: thejigglesmith on April 12, 2016, 01:59:25 AM
Please add me to the list too!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: winovino on April 13, 2016, 09:43:10 PM
I would very much like to be added to this list as well.
Thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: ango4 on April 13, 2016, 10:48:01 PM
Hey yoda! Just saw the video on YouTube that showed you in your sanctum and it made me want the chassis you had on there.

If this is the same then please add me on the list!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: vsutherland01 on April 14, 2016, 11:51:14 AM
I sent a PM as well, I am already signed up for a 2.0 kit please also sign me up for a classic replica kit. I am ready to pay whenever.

:)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: BruceTS on April 14, 2016, 05:55:51 PM
Add me to your list for the chassis
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: sajuukar on April 15, 2016, 12:58:44 PM
This sounds great, notify me also when more information is available, please! 

Regards
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: MarkHolloway on April 15, 2016, 03:09:33 PM
Please add me to the chassis list too… please
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: MarkHolloway on April 16, 2016, 08:17:24 AM
2 chassis kits for me please
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: adiliyo on April 16, 2016, 08:25:06 AM
I'm new to all this but your work has me drooling, if its not too late please add me in for a kit as well!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Bace222 on April 16, 2016, 07:55:42 PM
Will you add me to this interest list? I would love one for sure!!!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: spaznick on April 17, 2016, 07:18:31 PM
If a spot is open or opens please add me
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: AstroDoge on April 20, 2016, 09:44:24 PM
I'm brand new to this forum and to saber collecting in general, I really admire Yoda's work and was interested in a parks 2.0 replica hilt with a complete chassis installation done.  I was wondering how I should approach this or if anyone might suggest a great route towards getting a first high quality but reasonably price graflex for my collection.  Thanks so much
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: signalflow512 on April 21, 2016, 08:45:27 PM
I hope I'm not too late to throw my name on the list, I'm definitely interested as well!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yubnub on April 26, 2016, 07:54:53 AM
Hey Yoda, I'm guessing if you had anything to update us with you would...but please, i'm so keen for this kit to arrive! you got any info? ...just a tidbit would do?  :cry:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: erlomd on April 26, 2016, 09:09:27 AM
it would be nice to at least see what one would look like :) ... if its anything like the ones on the vintage, then that will be awesome
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Idaho Ren on April 26, 2016, 09:12:31 AM
#latetotheparty  Color me interested Yoda. If this might fit the MPP 2.0 that's coming I'd be interested in 2. Excellent work as always and thanks for the hard work to make this a good introduction for a DIY crystal chamber.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Rysandro on April 26, 2016, 11:05:41 AM
#latetotheparty  Color me interested Yoda. If this might fit the MPP 2.0 that's coming I'd be interested in 2. Excellent work as always and thanks for the hard work to make this a good introduction for a DIY crystal chamber.
Shoot I didn't even tho k about that.

This chassis would for sure fit the upcoming DV6 huh
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yubnub on April 26, 2016, 11:21:40 AM
... if its anything like the ones on the vintage, then that will be awesome

Too right! ...I cant wait. Might have to sell-on my current Graf 2.0 to fund it though!

Have just made a shine through mod to my TGS Glass Eye, which kept me amused...need another project though. I was disappointed to find they had a plastic lens so replaced with nice glass crystal and inserted a small length of Fibre Optic to channel the light to the new lens. It looks awesome!

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi358.photobucket.com%2Falbums%2Foo21%2Fyubnub1%2FIMG_5480_zps7npvxgpq.jpg&hash=b0219118d87be8be3d65c4595cc8743d62616da5)

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi358.photobucket.com%2Falbums%2Foo21%2Fyubnub1%2FIMG_5482_zpsrxh0hpyb.jpg&hash=c60972312384d11258fc55f70a49f54c8d8f4485)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yubnub on April 26, 2016, 11:33:37 AM
here are the parts...

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi358.photobucket.com%2Falbums%2Foo21%2Fyubnub1%2FIMG_5488_zpsbnksac4e.jpg&hash=23ad897a51ea728df575e6b5e106e72d09785fab)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: erlomd on April 26, 2016, 12:23:57 PM
here are the parts...

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi358.photobucket.com%2Falbums%2Foo21%2Fyubnub1%2FIMG_5488_zpsbnksac4e.jpg&hash=23ad897a51ea728df575e6b5e106e72d09785fab)

very nice!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yubnub on April 26, 2016, 12:37:00 PM
Cheers buddy!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: winovino on April 26, 2016, 03:19:24 PM
here are the parts...

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi358.photobucket.com%2Falbums%2Foo21%2Fyubnub1%2FIMG_5488_zpsbnksac4e.jpg&hash=23ad897a51ea728df575e6b5e106e72d09785fab)



you dont happen to have a pic of the eye from the backside do you?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yubnub on April 26, 2016, 04:01:26 PM
Sure thing buddy...

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi358.photobucket.com%2Falbums%2Foo21%2Fyubnub1%2FFF70808E-2FE3-47C1-B63A-B9D1E61EC210_zpsopwwbqop.jpg&hash=46d5b3ac62062d002bf873830dff72bf9da3bb26)

Any good?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: winovino on April 26, 2016, 05:25:37 PM
Sure thing buddy...

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi358.photobucket.com%2Falbums%2Foo21%2Fyubnub1%2FFF70808E-2FE3-47C1-B63A-B9D1E61EC210_zpsopwwbqop.jpg&hash=46d5b3ac62062d002bf873830dff72bf9da3bb26)

Any good?

perfect. thanks!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: djdanny402 on April 26, 2016, 05:36:14 PM
So the tgs version is already a shine threw?
I was looking at it but it looked solid to me.

P.s I've seen ppl cut the heads off a led and use the top portion like you did with the glass.
Bravo for some innovation though!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yubnub on April 27, 2016, 12:24:27 AM
So the tgs version is already a shine threw?
I was looking at it but it looked solid to me.

P.s I've seen ppl cut the heads off a led and use the top portion like you did with the glass.
Bravo for some innovation though!

No no, I drilled through with a 2.5mm and then inserted the fibre optic. It even comes with a plastic lens which I think is a shame. Hence the change to glass.

I have a spare one now if anyone is interested. Will post it up in the FS board. Also modifying the original Graflex 2.0 but waiting for the larger glass lens to come in. 
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: john_reaume on May 05, 2016, 04:03:20 PM
I have a JQ Stainless Graflex body on order and interested in getting your version 2 to fix inside. Please add me to the list
Also IM'd you a few weeks ago
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Dyob Kram on May 07, 2016, 10:03:00 PM
Hi. I'm interested in a kit for a parks 2.0 thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: stevenchin77 on May 08, 2016, 07:17:30 PM
Hi, just ordered my 2.0 and would like to order the chassis kit once available as well....Thank you.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: kase00s on May 08, 2016, 11:19:13 PM
Hi Yoda, I am very interested in purchasing the new chassis kit for the parks graflex 2.0 when it becomes available. Please add me to the list. Thank you!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Josste_Willlitt on May 10, 2016, 02:34:23 PM
Hello Yoda,

I have ordered a graflex 2.0 as my first sober and was wondering if there is still space to be added to the list for a chassis kit?

hope I'm not too late to the party
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: AstroDoge on May 19, 2016, 10:38:44 PM
Please add me to the list if there is still room, thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: djdanny402 on May 20, 2016, 03:47:25 AM
Any updates on this???
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: TheGraflexWielder on May 22, 2016, 04:06:48 AM
I would like to be updated when these new chassis kits come out. I just ordered a Parks Saber Graflex and want to install electronics in it. Please put me on waiting list. Thanks! :grin:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Byakuya on May 22, 2016, 09:12:19 AM
I don,t know if i'm too late, but would love to get in on this if its not too late
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Gregc57 on May 26, 2016, 11:39:52 AM
I also would like to be notified when the kit becomes available.
Thanks,
Greg
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: DarthGatti on May 26, 2016, 04:31:03 PM
Master Yoda, I am interested as well. Please add me to the waiting list good sir.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sithilis on May 26, 2016, 05:32:15 PM
I will be interested in one, I assume it will also fit the mpp
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Dr. Hoo on May 30, 2016, 08:50:48 AM
I am also interested for a graflex 2.0 chassis kit. Please let me know when this is available. I am ready to purchase.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Dr. Hoo on May 30, 2016, 09:00:58 AM
I would also like to know which kit would fit the Roman Props graflex replica. The one for the vintage or the one for the 2.0?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: AstroDoge on May 30, 2016, 10:17:55 AM
I would also like to know which kit would fit the Roman Props graflex replica. The one for the vintage or the one for the 2.0?
I believe it is the one for the vintage
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: shiftdeleted on May 31, 2016, 08:33:25 AM
add me to the list please! willing to do a pre-order as well.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: jcru on May 31, 2016, 10:08:35 AM
Hi, please add me to the list for the v2.0 chassis to fit the Parks/Korbanth Graflex hilt, kind sir.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: reavengeance on June 04, 2016, 12:04:21 PM
Count me in AND ADD ME TO THE LIST!!! Joined this forum just to hop on this interest thread.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Oldroof on June 07, 2016, 09:54:52 PM
I would like to put my name down once I have the Korbanth's graflex 2.0 in hand.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: lakotazx9 on June 09, 2016, 01:30:17 AM
If there is still space in the run I would love to be added to the list.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: yooshilee on June 09, 2016, 02:13:36 AM
count me in aswell :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Battleflags on June 09, 2016, 09:53:51 AM
Please put me down for one . Thank you
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: welshdragon on June 09, 2016, 10:13:49 PM
please add me to the list. Thank you very much.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: DarthGatti on June 11, 2016, 08:44:00 AM
Please add me on the list of space is still available! I'm so stoked about this chassis
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: IceSaber on June 12, 2016, 11:19:58 AM
Do we have any idea of the timescales of these? The post was created over 6 months ago so I'm curious when this will get going with some sort of an ETA if possible. A fair few of us now have our Graflex 2.0's but are patiently waiting for this awesome chassis to become available to fit electronics. Until that time I just have a cool looking piece of metal to hold and swing when I'm bored lol.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: SamNYC on June 17, 2016, 01:08:46 PM
Hi,

Please add me to the list. Hopefully this is still a thing as I'm due to receive my 2.0 kit in a week or so.

Thanks!

Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sakperi on June 17, 2016, 09:53:57 PM
I just assembled my Graflex 2.0 and it's great but it lacks something, so please add me to the list for this chassis. I'm waiting for more info. Thank you.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: jedimax on June 20, 2016, 09:57:38 AM
i am interested please include me in the list.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: adamcap926 on June 22, 2016, 08:44:36 PM
Please add me to the list.  Thank you.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: memberseven on June 30, 2016, 10:08:46 PM
Please add me to the list. thanks
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: BenK89 on July 02, 2016, 04:15:59 AM
.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: BenK89 on July 04, 2016, 11:21:10 PM
Please Put me down for one as well.  :grin:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: LUKE SKYWALKER on July 05, 2016, 02:24:50 AM
Hey there Yoda!
Please put me down for a 1/2 kit!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: AnthonyC on August 02, 2016, 11:11:12 AM
I would love a crystal chassis kit
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Sakperi on August 06, 2016, 08:22:35 AM
Do we have any update???
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: coldvizjerei on August 06, 2016, 10:10:22 AM
Some:

Hello from YODA updates (some good and bad news) (http://www.fx-sabers.com/forum/index.php?topic=50299.msg643998#msg643998)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: fusion150 on August 07, 2016, 12:36:44 AM
Please add fusion150 to your list for a Glaflex 3-Cell version.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Brad1981 on September 05, 2016, 03:38:07 AM
Please add me to the list. Thanks.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Prdone on September 18, 2016, 12:06:34 AM
Please add me to the list. Thanks

Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: zenid on October 14, 2016, 03:37:50 AM
Please add me to the list, too. Thanks!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Lord Wrath on October 17, 2016, 06:54:26 PM
Yoda......I just ordered a Parks 2.0.  I live in the next town over from you and can drop it off and let you borrow it so you can take measurements.  I just sent you a PM about this, but I'm brand new to FX Sabers and I'm not sure what is the best way to get ahold of you.  Hopefully one of my messages finds you.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Brad1981 on October 26, 2016, 02:44:35 AM
Just curious if anyone has heard anything?  Probably not but figured it wouldn't hurt to ask. Thanks.

-Brad
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Lord Wrath on November 01, 2016, 07:39:43 PM
I sent Yoda a message a couple of weeks ago, but I haven't heard back yet.  I hope everything is OK with his health issue.  If not, modding sabers isn't (and shouldn't be) at the top of his priority list.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Yoda on November 23, 2016, 02:01:54 AM
I understand the frustration and I do apologize for the delays.

For this 2.0 chassis I had only worked out my initial concept for it in December and became very busy/preoccupied
with other projects for the first few months of the year.
Once I did get the actual cutting files created and test cut I was not satisfied with the way some parts were coming out
so I needed to do some revisions and was working on doing so until I had both the computer loss and being hospitalized.

In addition to everything there are other parts I had been waiting on for improvements to go with the chassis kit.
One specifically was a better Red button and those should be available soon as well.

After I am done with the Replica/Vintage system I want to apply the same or similar styling to this 2.0 set-up so
once I have completed items to show I promise I will post them and re-open/update the topics.

Anyone who has not read the information about what has happened to me should read the following topic
for additional information…


Hello from YODA updates (some good and bad news) (https://www.fx-sabers.com/forum/index.php?topic=50299.15)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Lord Wrath on November 23, 2016, 08:56:13 AM
Thank you very much for the detailed response.  As you may have read, I reminded folks that your health should be priority 1.  We just needed to hear something from you to know you are ok, and if so, that you are still in the game (Lol).  I'm sure I speak for all of us in saying glad you're doing well, and we understand and will be patient with your sabersmithing.  Let me know if you need to get your hands on a 2.0...I live in Orangevale.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Jamielov on November 24, 2016, 06:11:25 PM
best wishes for feeling better.  If in time you are going to offer a chamber kit compatible with the Korbanth 2.0, please add my name to the list of willing to purchase
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Brad1981 on November 26, 2016, 06:26:59 AM
I should have specified, put me down for the full chassis for a Roman's Replica (not 2.0) Thank you.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: kman on December 15, 2016, 10:21:43 AM
I would also be interested in having one of these amazing kits for my Korbanth 2.0!
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Lord Wrath on December 20, 2016, 07:44:58 AM
Please put me down for a full chassis for a Parks 2.0.  Do you have an estimate for when you might get to my order?  THANKS
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Brad1981 on January 11, 2017, 04:07:24 PM
I have to move on, unfortunately.  Please remove me from the list. Thank you.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Lohan on January 17, 2017, 08:36:24 PM
Hello to all, I am new to the forums. Please, add me to the list for a full saber chassis kit for korbanth 2.0 kit, thank you so much and i hope you are doing much much better Yoda. Best wishes.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: kman on January 18, 2017, 03:26:56 PM
I can't recall if I posted or not, but just in case I didn't:

Interested, pending information on final price and final design. :)
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Lord Wrath on February 13, 2017, 07:41:39 PM
Please remove my order from the list.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: ParliamentRook on February 14, 2017, 01:26:49 AM
I too can't wait indefinitely for a reply on my request for a price and estimated time for receiving a product.  Unfortunately I must move on in pursuit of a chassis and crystal chanber.  It's too bad that others here are patiently waiting for a response that might not come...4 months in my case :embarrassed:

It's not "too bad".

If you actually look through the thread you'll see he's had some serious health issues, which of course take priority over a project like this. We haven't given him any money, no transaction has taken place, simply interest in a product. We're not owed anything.

Please don't guilt someone for putting their health first.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Lord Wrath on February 14, 2017, 04:07:17 PM
My apologies to Yoda.  I regrettably let my strong desire to own a piece of art from a legendary icon in the saber community turn into anger.  I regret it and wish I hadn't acted so insensitively.  If I could take it back, I would.   
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Esteban Soza on April 11, 2017, 12:27:02 AM
Would love to have one of these 2.0 kits put me on the list and I hope your health had gotten better MTFBWY :cool:
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: Brad1981 on August 15, 2017, 05:51:43 PM
Well...here I am, back on the list. Please put me down for a vintage chassis.  Thanks.
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: winovino on August 16, 2017, 03:48:19 PM
Is this project dead? I understand Yoda's health isn't well and would understand if this is on the back burner, i am just curious.... anyone have any inside info?
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: pjmanos on May 05, 2019, 08:42:01 PM
I would like to be added too
Title: Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)
Post by: 045804 on June 11, 2019, 02:54:21 PM
I, too, would be interested should the project get restarted.