FX-Sabers.com
Jedi Temple => Inactive / Removed Manufacturers => FX-SABERS Archives => The OUTER RIM Armory => Topic started by: JANGO FETT on September 12, 2009, 12:27:39 PM
-
First of all DON'T FREAK OUT
1. My paperwork is incomplete
2. Parts are incomplete.
They are on the way. NO ETA, as of today.
1. Serafel: Lux V Consular green Aluminum covertec knob US 2.1 install confirmed
2. Darth Matth; Lux V Consular Green Aluminum covertec knob US 2.1 install confirmed
3. Tobu: (Lux V Sunrider's Destiny) Aluminum covertec knob US 2.1 install confirmed
4. Orakaa: Lux V SRD Aluminum covertec knob US 2.1 install confirmed SENDING TO GC
5. Onli-won Kanomi: Lux V SRD Brass covertec knob US 2.1 install confirmed
6. Torichef: Lux V SRD Aluminum covertec knob US 2.1 install confirmed
7. Reaver Lux III Red 2.1 install confirmed
8. Reaver Lux III Red 2.1 install confirmed
9. DerFrownmacher: p4 wht US 2.1 li-ion setup confirmed
10. MrLamChop; Lux III Blazing Red in hilt li-ion charger 2.1 install confirmed
11. Ri-on Ozryel; Lux III SRD CYAN, aluminum covertec 2.1 install DIY confirmed
12. Darth Akira: Lux V Guardian blue - US 2.1 install confirmed
These are the ones I have paper work for. If your are on this list, confirm the above is correct. post any additional details with your post.
If you DO NOT want your saber built by me or want to DIY it yourself now is the time to tell me.
If you are not one of the above 11 listed, your post will be deleted.
If you paid for a Li-ion or Nimh setup, I need to know.
I'm not sure how that's going to work, but I need to get a count together
-
I believe #5 is me albeit with a spelling error...unless I have a cousin in Jabba's 'Famillia' I don't know about; "leave the lightsaber, take the Kanoli" eh... ;D
I confirm those are the correct details on my Overlord itself...additionally I had also purchased an US 2.0 and install.
Thanks for this update Jango.
-
Confirmed, the order is fully correct.
-
Confirmed my order.
Everything looks right.
Thank you guys for busting your arses to get everything together.
-
Yes I'm number 2 on the list.
It's correct.
I also had an In-hilt charge with NIMH batteries and charger.
I can e-mail you the administration of my payment if needed, also from Paypal.
Thank you Jango Fett.
Your the best.
-
Oups, I saw that post a bit late.
First of all, thanks for taking care of this.
I'm the number 4 on this list, and the data are correct... I have spoken with Casey and Dusty from GEMINI CONCEPT, and as they are already working on a saber for me, they kindly offered to handle my Overlord as well.
Would it be possible for you to send it to them ? (that way oud have one less Overlord on your bench to deal with)
-
Sorry for the delay ::)
number 3 of the list
my order was:
-Overlord - Lux V SRD - alluminium clip
-Steve 2.0 (and upgrade to 2.1)
-Li-on battery (out-of-hilt charge system)
-installation
;D
Ask to me if you need anything else. ;)
Thank you
ciao
-
LIST UPDATED
4 SPOTS LEFT.
ANY UNCONFIRMED HILTS WILL BE SENT NON-BUILT TO ULTRASABERS HQ
-
#11 confirmed
-
#7 and #8 confirmed
-
#10 confirmed, i also ordered a ultrasound 2.1 install
-
I want to touch base here.
I got things a little snackered with the paperwork when I sent it out to Jango. I know that there are some non-sound sabers that are to be sent out, but I need to verify all of them and to take account for those that are unaccounted for.
I am checking this list with what was confirmed, because I did get some of the paperwork mixed around. This is totally on me, and I will get it sorted out ASAP.
Had a bit of down time due to internet connection interruption, so I am a little behind here getting things sorted. Sorry for the troubles.