FX-Sabers.com

The S.A.B.E.R. GUILD: Saber Manufacturers => Sith Planet => Topic started by: jbkuma on March 05, 2018, 01:37:33 PM

Title: Can't separate parts of LS6 - SOLVED
Post by: jbkuma on March 05, 2018, 01:37:33 PM
I'm a pretty strong person and I've tried everything short of putting a wrench on these parts and I cannot get them apart.


Does anybody have a suggestion that doesn't involve something that is going to scratch or otherwise damage these parts?  Trying to remove the copper portion from the black portion, and the internal part of the emitter from the outer part.
Title: Re: Can't separate parts of LS6 - SOLVED
Post by: SUPREME LEADER SNOKE on March 05, 2018, 01:55:01 PM
Try the freezer for a few minutes
Title: Re: Can't separate parts of LS6 - SOLVED
Post by: Mewgen on March 05, 2018, 01:59:00 PM
I sometimes use rubber straps and wd40. Worked for me.
Title: Re: Can't separate parts of LS6 - SOLVED
Post by: jbkuma on March 05, 2018, 02:24:40 PM
Thanks guys, I had already tried my strap wrench.. a combination of that and the freezer got it apart.