fiduciary

Author Topic: CFX won’t boot  (Read 1079 times)

0 Members and 2 Guests are viewing this topic.

Offline jaylakejr

  • No Force
  • *
  • Posts: 28
  • Um...Hello?
CFX won’t boot
« on: January 14, 2020, 09:02:37 PM »
Have a weird one. Am running 10.003C. Everything was running great. I changed the log port from 0 to 2 (to enable Bluetooth) it worked a few times. Let the saber sit while I ate dinner, did not use kill key, let it go to sleep. When I came back it wouldn’t boot. Tried kill key reboot, still nothing. Logged the board and I get:

ERROR] : Problems were found during boot
 [ERROR] : Boot diag value = 0b00000001
 [ERROR] : Error Counter = 0

Any idea what’s going on?

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: CFX won’t boot
« Reply #1 on: January 14, 2020, 09:45:19 PM »
saw your post on FB, answered there as well as here too.
Provide a full log of the boot, first bit (right most) of error means "searched the SD card for too long" which a stalled board will actually do if left searching the SD for some time (just saying that it's not necessarily representative of what is wrong if you stalled the board on purpose to log)

Offline jaylakejr

  • No Force
  • *
  • Posts: 28
  • Um...Hello?
Re: CFX won’t boot
« Reply #2 on: January 15, 2020, 09:29:32 AM »
saw your post on FB, answered there as well as here too.
Provide a full log of the boot, first bit (right most) of error means "searched the SD card for too long" which a stalled board will actually do if left searching the SD for some time (just saying that it's not necessarily representative of what is wrong if you stalled the board on purpose to log)

Hey ERV, I posted the full log in facebook too but here it is error.txt - Google Drive

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: CFX won’t boot
« Reply #3 on: January 15, 2020, 10:13:10 AM »
all good, downloaded and dont' know yet as it seems to crash before outputting anything else but I'll know more when trying your package (thanks for this as well)

 

retrousse