FX-Sabers.com
Trade Federation - Buy/Sell/Trade => Misc Equipment => Topic started by: bombarta on September 27, 2016, 10:08:18 AM
-
I have currently have Romans Inception & MK1 aluminium heatsinks in stock for replacement of the steel heatsink supplied with Romans props Inception hilt.
These heatsinks will extend the life of your LEDS and allow you to run them at full power without fear of overheating or blowing the main leds.
They are also cut shorter to allow fitting if a accurate blade plug ( there is no blade holder overhang ).
Price per unit is $17 U.S. payed as goods via PayPal + shipping. PayPal fee is included in price.
Please pay $17 U.S. payed as goods plus $12 for tracked and signed delivery to gazza0728@yahoo.co.uk
Please put forum name and Inception or MK1 heatsink in PayPal note.
Thanks.
Inception.
Bombarta paid.
offsite paid.
offsite paid
Coran Horn X5 paid. Posted
Ahsoka Tano paid. Posted
Darthpool paid. Posted.
ShadyCanuck X 3 paid. Posted
cayde6 x3 paid. Posted.
Rydiddy paid. Paid posted
mvtfrmchi paid. Posted.
Thomas Rutledge FB paid posted
Jcru X2 paid. Posted
Msasin paid. Posted
Djcbooks81 paid. Posted
Jordan Eugene FB paid. Posted
Oswaldaldkefo FXS paid. Posted.
Jango Fett FXS paid. Posted
Scott Hughes FB paid. Posted
Wolf69 paid. Posted.
Grazer FXS paid. Posted Bill_Fimm FXS X2 paid. Posted.
Neverwayne X2 paid. Posted.
Darth Quito paid. Posted.
Sketcherdan paid. Posted.
Offsite X2. Paid. Posted.
gschram92 X1. paid. Posted.
Darth obi don FXS. paid. Posted.
Kai FB. Paid. hold until bp.
Kyphotic_jedi paid. hold until BP.
Shiftyscarecrow paid. Posted.
Kotaro Paid. Posted.
takeshiEP. Paid. Posted.
Kor offsite paid x1. Posted.
SpaceWindu paid. Posted.
Iggy FXS. Paid. Posted.
Ichnob paid. Posted.
ES FB. Paid. Posted.
Diego86 paid.
MK1 list.
Rydiddy X1. FX. Paid. Posted.
Bruno1067. X1 FX. Paid. Posted.
Balthazar. X1 Paid. Posted.
Wolf69. X1 Paid. Posted.
Offsite X1. Paid. Posted.
Darth obi don FXS. paid. Posted.
Philip sandifer offsite. paid. Posted.
Kai FB. Paid. hold with I. HS.
takeshiEP. Paid. Posted.
DarkSideTendencies. Paid. Posted.
Kor offsite x2. Paid. Posted.
Timbuktu paid. Posted.
macross40k paid. Posted.
Lordofthesquids paid.
P.E. offsite paid. Posted.
Darth stallion paid. Posted.
SpaceWindu paid. Posted.
Bill_Fimm X2 paid. Posted.
Ichnob paid. Posted.
Soulofche paid. Posted.
G501strooper paid.
Red Hawk. Paid.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_142705.jpg&hash=be60f49da17eb29781b95811bd556b01c19f6370) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_142705.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_144457.jpg&hash=1daa77ae327a0ff8446e09c208ab8f909f5ed1bc) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_144457.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_144536.jpg&hash=df6f177b81a656e189c254737cb7031ecada7e84) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_144536.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_144618.jpg&hash=2230251ea46786a06cf70ec55f4182727a5a68c4) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_144618.jpg.html)
Before
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_151003.jpg&hash=4011bc7ba636ba5e7ba675c5776311fdd44b96f7) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_151003.jpg.html)
And after
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_144750.jpg&hash=b456ef469c802fbf057fb45854e42f7d09ace14a) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_144750.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_142207.jpg&hash=81bf62181ecd05dbb1ff24afd171d70325096325) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_142207.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_142419.jpg&hash=632b8cfef25d81647db0c444d42607dd764842f5) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_142419.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_142222.jpg&hash=7cbc5b99bbe60945cf76bd10ad07213a6ac38797) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_142222.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_151558.jpg&hash=a83b6445035978370fb90b83915bf7f8f114713c) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_151558.jpg.html)
Thanks.
Bomb.
-
I'm in for one
-
Interested
-
Bump
-
Ooooh count me in please!
-
If these will also work for a MK1, count me in
-
If these will also work for a MK1, count me in
Do these fit in the MK1? If so, I'd like one.
-
I'm in for 1.
-
Caine & Grazer, I don't know if they are the same size thread.
Can someone confirm if the Romans mk1 has the same heatsink as the Inception?
-
If it is the same as the MK1 I will take a few.
-
Now in stock.
Price and payment details in first post.
Also if anyone has a Romans mk1 that they can send the steel heatsink to me to check for size and thread I, will send it back with a free aluminium heatsink if it is the same.
Bomb.
-
I'll take one please.
-
I'll take 2.
-
I'll take my chances on one. Count me in, please.
-
I'll take my chances on one. Count me in, please.
Added to list.
-
First bunch ready to go.
Hopefully I'll have them posted tomorrow.
-
My payment went out today. Excited to see this piece of kit.
-
In for one
-
In for one
Wolf your already on the list.
Contact me for payment details, also your message inbox is full, I tried to pm you yesterday.
-
Please add me for one. Thanks!
-
I'll give the remaining people on the list who have not paid until next weekend to pay, after that the list will be removed and then it will be first come first served.
-
Bump
-
Bump
-
I have both the Inception and the MK1. They are not identical. The thread is the same, but they are not an even swap.
Inception on left, MK1 on right.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi346.photobucket.com%2Falbums%2Fp422%2Fbill_fimm%2F79D4FDA7-6AAA-4574-AB3C-CC879C652958_zpsjwhkes5o.jpg&hash=256ed035ba0b6cb786449b537716de1c34664ba6) (http://s346.photobucket.com/user/bill_fimm/media/79D4FDA7-6AAA-4574-AB3C-CC879C652958_zpsjwhkes5o.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi346.photobucket.com%2Falbums%2Fp422%2Fbill_fimm%2F325FE0AC-CBFA-48C9-A8B7-898BCCF38531_zps0g2tipvt.jpg&hash=7ed5d40f2810b424e178d3c6d1fb05e75b7fd451) (http://s346.photobucket.com/user/bill_fimm/media/325FE0AC-CBFA-48C9-A8B7-898BCCF38531_zps0g2tipvt.jpg.html)
-
The thread needs to be cut all the way to the base of the heatsink for the mk1 as well as being shorter.
I will be starting an interest thread for the mk1 in the coming week.
-
Here is another pic of them both if it helps you out, the Inception being the left one. I would definitely be in for 2 of them if you made the MK1 version. Thanks.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi346.photobucket.com%2Falbums%2Fp422%2Fbill_fimm%2FC0A4A8E5-9B99-46B8-B606-4E1A4E19D6AB_zps3gkxwx5j.jpg&hash=f5f7f106b94fb9ee2e8225cb69975fae4476e106) (http://s346.photobucket.com/user/bill_fimm/media/C0A4A8E5-9B99-46B8-B606-4E1A4E19D6AB_zps3gkxwx5j.jpg.html)
-
These are now first come first served. Anybody on the list who has not paid have now been removed.
-
Bump
-
Got mine today.. a great fit... Thanks!
-
Bump
-
Bump
-
Bump
-
Hey Bomb, are these compatible with the mk1 ANH Roman Obi hilts?
-
Hey Bomb, are these compatible with the mk1 ANH Roman Obi hilts?
Hey bud, they are the same thread but the threaded section needs to be shorter and the thread also needs to be cut right up to the bottom of the heatsink to work.
Should I start an interest thread for mk1 heatsinks?
Bomb.
-
Bump
-
Hey Bomb, are these compatible with the mk1 ANH Roman Obi hilts?
Hey bud, they are the same thread but the threaded section needs to be shorter and the thread also needs to be cut right up to the bottom of the heatsink to work.
Should I start an interest thread for mk1 heatsinks?
Bomb.
Just bought a MK1 today while it's on the Black Friday sale. I would definitely get one if you do a run
-
Hey Bomb, are these compatible with the mk1 ANH Roman Obi hilts?
Hey bud, they are the same thread but the threaded section needs to be shorter and the thread also needs to be cut right up to the bottom of the heatsink to work.
Should I start an interest thread for mk1 heatsinks?
Bomb.
Just bought a MK1 today while it's on the Black Friday sale. I would definitely get one if you do a run
It's looking likely that I will have the mk1 made. Probably be ready January-February.
-
Interested pm sent
-
Interested pm sent
Replied.
-
Bump
-
Bump
-
Bump :grin:
-
This is now also the interest thread gor mk1 heatsinks.
-
How about a prop accurate blade plug that fits over the Inception Heatsink you made?
-
How about a prop accurate blade plug that fits over the Inception Heatsink you made?
Plugs for the inception and mk1 would be awesome
-
Hey Bomb, I'm interested in a MK1 heatsink! Do you have them already? PM me with the payment details if you do!
Thanks!
-
I maybe interested in a MK1 Heatsink, subject to design & price, do you have details & photos, thanks...
-
MK1 heatsinks now in stock.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_151558.jpg&hash=a83b6445035978370fb90b83915bf7f8f114713c) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_151558.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_142222.jpg&hash=7cbc5b99bbe60945cf76bd10ad07213a6ac38797) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_142222.jpg.html)
Bomb.
-
Thank you for the MK1 update, in relation to the MK1 heatsink is it possible to see a side by side image, I would like to see the comparison, is your replacement heatsink the same size & dimensions? thank you!
-
Bump :tongue:
-
Bump
-
Bump
-
I'd like 1 of each. Do you combine Shipping if I order both at the same time, or is it S.H. x 2
?
Don Mac.
-
I'd like 1 of each. Do you combine Shipping if I order both at the same time, or is it S.H. x 2
?
Don Mac.
Shipping is combined.
So it will be $34 plus which ever choice of shipping you choose as there weight is so light they would need to be around 10 for the cost to increase.
-
I'd like 1 of each. Do you combine Shipping if I order both at the same time, or is it S.H. x 2
?
Don Mac.
Shipping is combined.
So it will be $34 plus which ever choice of shipping you choose as there weight is so light they would need to be around 10 for the cost to increase.
Excellent. Payment sent for 1 of each + Standard shipping.
Don Mac.
-
Payment sent for 1x MK1 Heat Sink, thanks...
-
Payment received thank you.
-
Bump
-
MK1 Heat Sink received and installed super happy :grin:
-
Payment sent for MK1 (x2) heatsinks. Thank you.
-
Payment sent for MK1 (x2) heatsinks. Thank you.
Received. Thank you.
-
Only 4 Inception heatsinks left.
30 MK1 in stock.
-
Bump
-
Bump
-
Bump
-
1 Inception heatsink left in stock.
Plenty of mk1 available.
-
Inception Sold out.
Still plenty of mk1 in stock.
-
Bump.
-
I have now removed standard delivery as an option because two parcels have arrived damaged without their contents. As a good will gesture I replaced the items free of charge even though standard shipping was at own risk.
Bomb.
-
these are shine versions for Rydiddy.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2Fblade%2520plugs%2F20170428_172232.jpg&hash=345e4ca6925c1e3a9d6b6ef2ea255ea068cea95f) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/blade%20plugs/20170428_172232.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2Fblade%2520plugs%2F20170428_172247.jpg&hash=55cd9c0596549d861a71d61b3dddc867faa793be) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/blade%20plugs/20170428_172247.jpg.html)
Bomb.
-
Inception heatsinks back in stock
-
Ok guys there is simple instructions on how to pay at the start of the thread. I also tell you what to do when I message payment details.
When I ask for your forum name and what you are paying for to be put in the PayPal note that's what I expect, unfortunately the Force isn't real so I don't have Jedi mind powers to decipher who has sent me money with out those details.
-
-
Bump :tongue:
-
Payment sent for
2x Inception heat sink
2x Inception blade plug
1x MK1 heat sink
1x MK1 blade plug
Thanks.
-
Payment sent for
2x Inception heat sink
2x Inception blade plug
1x MK1 heat sink
1x MK1 blade plug
Thanks.
Received. Thanks.
-
Hey Bomb, just sent through a payment for one Mk1 heatsink. Thanks so much!
-
Hi. I just paid for an inception heat sink and blade plug. Thanks!
-
Hi. I just paid for an inception heat sink and blade plug. Thanks!
Received thank you.
-
Bump
-
How much for shipping a MK1 heatsink and a MK1 blade plug in the UK together?
-
How much for shipping a MK1 heatsink and a MK1 blade plug in the UK together?
£4.50
-
I'm sending money now!
-
PM sent.
-
I sent fund for
1x Inception heat sink
1x Inception blade plug
1x MK1 heat sink
1x MK1 blade plug
-
I have received all. Thank you very much.
-
Bump
-
Hello there,
Pm sent :)
-
Hello there,
Pm sent :)
Haven't received any pm's dude
-
Weird, another one sent :)
-
Hup
-
Hello,
Seems like a long time since the last post. Are the MK1 heat sinks still available?
Thanks in advance.
-
Hello,
Seems like a long time since the last post. Are the MK1 heat sinks still available?
Thanks in advance.
Yes still have them
-
Hey Gary,
I'll need another one of these. Turns out I'll be doing two of these hilts but only have one of your heatsinks.
-
Hey Gary,
I'll need another one of these. Turns out I'll be doing two of these hilts but only have one of your heatsinks.
Np bud, which do you need, MK1 OR Inception?