FX-Sabers.com

The S.A.B.E.R. GUILD: Saber Manufacturers => Force Relics => Force Relics Portfolio/Gallery => Topic started by: BOBA FETT on July 23, 2015, 12:10:04 AM

Title: Force Relics Presents: Venator - our new customizable budget hilts
Post by: BOBA FETT on July 23, 2015, 12:10:04 AM

(https://lh4.googleusercontent.com/-Wy0y_kbUo9U/UIw0E3UqUOI/AAAAAAAABPw/p3RxhmCcPCs/w883-h903-no/fr+logo.jpg)
A Blend of props and Pop Culture

Hello Everyone!

Force Relics is, once again, proud to present the newest addition to our lightsaber family: Venator, a highly customizable budget saber
We haven been working very hard on this new design and have tried to make it as duelworthy, sleek looking and customizable as possible. And this at a very budget friendly price.

First, some glams of the ones we have finished (and sold) so far:

(https://lh3.googleusercontent.com/vlfbBfIa4V7g37pfIrAT2SYVlAbt8-AGaaq60Sn4JIE=w834-h741-no) (https://lh3.googleusercontent.com/vlfbBfIa4V7g37pfIrAT2SYVlAbt8-AGaaq60Sn4JIE=w834-h741-no)(https://lh3.googleusercontent.com/1OtmJ-SctO7ebvNB1Y9v7scSt9CitaJpc-w86O1DT08=w721-h741-no) (https://lh3.googleusercontent.com/1OtmJ-SctO7ebvNB1Y9v7scSt9CitaJpc-w86O1DT08=w721-h741-no)(https://lh3.googleusercontent.com/BdCQxNel4dSWykW3qFE_70V_DPiMDm9cgM3j1qOUihE=w879-h741-no) (https://lh3.googleusercontent.com/BdCQxNel4dSWykW3qFE_70V_DPiMDm9cgM3j1qOUihE=w879-h741-no)(https://lh3.googleusercontent.com/A7lfxm45F1Pam9_eTGl5Lm0MNs3_DyTPSWOoWC3c24g=w810-h741-no) (https://lh3.googleusercontent.com/A7lfxm45F1Pam9_eTGl5Lm0MNs3_DyTPSWOoWC3c24g=w810-h741-no)

VIDEO:
https://youtu.be/yMft8ZnY30M

As said, these sabers are highly customizable. Just to give you a few ideas, here's a few of the ones we built and sold at a local convention:
(pics are taken prior to the install of electronics)


(https://scontent-ams3-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/11227862_1100136216667380_2476695995596393485_n.jpg?oh=1ab7a4a48b0b1c924f88579956a4e25a&oe=564E5B76) (https://scontent-ams3-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/11227862_1100136216667380_2476695995596393485_n.jpg?oh=1ab7a4a48b0b1c924f88579956a4e25a&oe=564E5B76)(https://scontent-ams3-1.xx.fbcdn.net/hphotos-xpa1/t31.0-8/11223711_1100136250000710_990850320824532507_o.jpg) (https://scontent-ams3-1.xx.fbcdn.net/hphotos-xpa1/t31.0-8/11223711_1100136250000710_990850320824532507_o.jpg)

PRE-ORDER instructions :

Stunt Venator Specs :

- 3W main LED module : green, red, white, blue, Cyan, Amber
- Optional : ‘Grand Master Purple’ : 15 €
- Stainless steel latching switch activation
- 18650 Li-ion 2400mAh 3,7V non-removable rechargeable battery
- 2.1 recharge port through pommel

Price : 150 € / piece + 21% tax (tax = applied for EU citizens only) + shipping.

Nano Biscotte Venator Specs :

- Tri-rebel or similar
- Nano Biscotte sound PCB
- alu/brass tactile activation
- 18650 Li-ion 2400mAh 3,7V non-removable rechargeable battery
- 2.1 rechargeport
- 2W Speaker
- blade plug

Price : 250 € / piece + 21% tax (tax = applied for EU citizens only) + shipping.

Crystal Shard Venator Specs :

- Tri-rebel or similar
- Crystal Shard PCB
- alu/brass tactile activation
- 2.1 rechargeport
- 18650 Li-ion 2400mAh 3,7V non-removable rechargeable battery
- 2W Speaker
- blade plug
- Additional aux switch setup: 25 €

Price : 300 € / piece + 21% tax (tax = applied for EU citizens only) + shipping.

Petit Crouton Venator Specs :

- Tri-rebel LED or similar
- Petit Crouton PCB install
- double alu/brass tactile setup
- 2.1 rechargeport
- 2 x 14500 7,4V Li-ion 800mAh non-removable rechargeable battery setup
- 2W Speaker
- blade plug

Price : 450 € / piece + 21% tax (tax = applied for EU citizens only) + shipping.

Crystal Focus Venator Specs :

- Tri-rebel LED or similar - Crystal Focus PCB install
- double alu/brass tactile setup
- 2.1 rechargeport
- 2 x 14500 7,4V Li-ion 800mAh non-removable rechargeable battery setup
- 2W Speaker
- blade plug

Price : 600 € / piece + 21% tax (tax = applied for EU citizens only) + shipping.


Options list :

- Additional color mixing fee: + 75 €
- Additional fee NB FoC: 25 € - blade @ 45 € + 21% tax (tax = applied for EU citizens only)
- Leather grip : 50 €
- Wood grip : 75 €
- Copper accents : ‘on request’
- Etching : ‘on request’
- Blade plug : 10 € (choice of wood, alu, brass or plastic white/black inlay)
- Alu or Brass covertec wheel : 10 €
- Weathering : 15 €
- Battle damage weathering : 25 €
- Window on blade holder : 10 €


Shipping quotes available on request.

If you have any questions regarding, drop us an e-mail @ info@forcerelics.com

Title: Re: Force Relics Presents: Venator - our new customizable budget hilts
Post by: Pfockerchief on July 23, 2015, 06:10:18 AM

Really cool.  That purple accented venator I'm digging  8)

Title: Re: Force Relics Presents: Venator - our new customizable budget hilts
Post by: Pinousse on July 23, 2015, 06:44:05 AM

Awesome new line of sabers  :))

Title: Re: Force Relics Presents: Venator - our new customizable budget hilts
Post by: Johannes Huber on July 23, 2015, 05:09:19 PM

A Great design:sleek and very fast looking with a very strong dose of the Star wars "shape language". Could you show us how they come apart for DIY installs and give us the dimensions?

Title: Re: Force Relics Presents: Venator - our new customizable budget hilts
Post by: BOBA FETT on July 23, 2015, 11:54:08 PM

Quote from: Johannes Huber on July 23, 2015, 05:09:19 PM

A Great design:sleek and very fast looking with a very strong dose of the Star wars "shape language". Could you show us how they come apart for DIY installs and give us the dimensions?

Here you go Johannes:

(https://lh3.googleusercontent.com/k7cOkAsYQZRZy3lM0YCQc6WAxoxqmIb4coO1jItymhY=w1600-h651-no)

As you can see, the saber consists out of a main body, pommel and blade holder that screw together (NOT MHS compatible)

We don't sell these as empties, but you are welcome to purchase a stunt which you can easily upgrade. All pommels come vented for future sound installs.

Oh, and the ID of the hilt is an overall 29 mm with a 1" blade holder