FX-Sabers.com

FX-Sabers Discussion - Including a Gallery of custom sabers. => Forum Gallery => Topic started by: Alec Skirata on November 19, 2013, 09:51:25 AM

Title: Korbanth Ven Zallow with NB
Post by: Alec Skirata on November 19, 2013, 09:51:25 AM
Hello Saberland,

may I present you one of my latest Saber.

Specs:
- Korbanth Ven Zallow Hilt
- Nano Biscotte V1
- 3,7V 18350 Li-Ion with 900mAh
- Cree XP-E Green
- 2W 20mm Speaker
- Illuminated Crystal Chamber
- Acryl weathering

Pictures:
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3809%2F10932601045_fb47359698_b.jpg&hash=6d0099c87c0be4574a2dead2cab4b82b5f8ac6f5)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Ffarm8.staticflickr.com%2F7388%2F10932661584_cc0f4f0c62_c.jpg&hash=2c1392e98a1754688ddd1e5d4d302c178631cd46)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3743%2F10932826013_5309328045.jpg&hash=beaf600e523f198f7085bf65e5a6ab598bb0e6a6)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Ffarm3.staticflickr.com%2F2808%2F10946504195_1494a0b843_b.jpg&hash=dc2053b0450dd9c505e9173791a0a2a9b18b2bb1)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3793%2F10946425595_07fd073b55_b.jpg&hash=ec058d44c7b3fad7b60eb1020a6e39b188c21f9f)

Album
Ven Zallow - a set on Flickr (http://www.flickr.com/photos/68618302@N08/sets/72157637816636235/)


Video: (http://www.flickr.com/photos/68618302@N08/10947317426/)

sorry for the bad quality of the Video. It's my first one...
Title: Re: Korbanth Ven Zallow with NB
Post by: Darth Terest on November 19, 2013, 10:10:30 AM
That thing is a Beauty...dont have words for this..... And you even leave the Crystal Chamber intact and took the Crystal that came with the saber...

 And could it be that this is the first Zallow Korbanth Hilt with Electronics ? Mission Accomplished !  ;)
Title: Re: Korbanth Ven Zallow with NB
Post by: Pyromatic177 on November 19, 2013, 11:47:25 AM
That's sweet. But just out of curiosity. Why did you only put a NB in it?..
Title: Re: Korbanth Ven Zallow with NB
Post by: Darth Terest on November 19, 2013, 12:05:33 PM
You did now that diametre of that hilt do you yes ?  ;D
Title: Re: Korbanth Ven Zallow with NB
Post by: jedicri on November 19, 2013, 12:06:25 PM
That's sweet. But just out of curiosity. Why did you only put a NB in it?..

I think it's because of the inner diameter of the hilt.  PC is too big.

I do remember a thread however where MH was planning a PC? Korbanth Ven Zallow... can't find the thread though...
Title: Re: Korbanth Ven Zallow with NB
Post by: Darth Terest on November 19, 2013, 12:13:42 PM
The only thing that fits without carving out the Inner tube is a Nano. Even the Crystal Shard had a to large diameter to fit properly...and i dont want metal touching the board...I dont know if a Spark or Mini would have a smaller diameter...but we want to stay Plecter with that saber...
Title: Re: Korbanth Ven Zallow with NB
Post by: Alec Skirata on November 19, 2013, 12:15:00 PM
Cause of the saber have just a ID of 3/4 inch...

Even when I cut out some of the Main tube for installing another board there will be no space... There're max 7/8 inch... so no chance
Title: Re: Korbanth Ven Zallow with NB
Post by: Pyromatic177 on November 19, 2013, 12:19:53 PM
Wonder how Justin here on the forums put in a CF5   ???
Title: Re: Korbanth Ven Zallow with NB
Post by: Deke on November 19, 2013, 12:22:50 PM
Wonder how Justin here on the forums put in a CF5   ???

Different hilt, that was a Kit Fisto Ven Zallow, much larger than the TEEENY TINY Parks/Korbanth version.

Good job on the hilt, it looks very nice. I really need to get around to getting mine installed sometime soon, still one of my favourite hilts.
Title: Re: Korbanth Ven Zallow with NB
Post by: Pyromatic177 on November 19, 2013, 12:29:53 PM
O that's right! I got confused for a sec lol  :P
Title: Re: Korbanth Ven Zallow with NB
Post by: jedicri on November 19, 2013, 12:32:38 PM
Wonder how Justin here on the forums put in a CF5   ???

That was not a Korbanth Ven Zallow.  The hilt was from this run: Ven Zallow "Axis" Lightsaber: Official run thread now open (http://www.fx-sabers.com/forum/index.php?topic=38943.0)
Title: Re: Korbanth Ven Zallow with NB
Post by: Justintmars on November 19, 2013, 12:45:09 PM
Wonder how Justin here on the forums put in a CF5   ???

Different hilt, that was a Kit Fisto Ven Zallow, much larger than the TEEENY TINY Parks/Korbanth version.

Good job on the hilt, it looks very nice. I really need to get around to getting mine installed sometime soon, still one of my favourite hilts.
I don't think it's a bigger in the handle.
I put the cf6 in the middle as it would not fit in the handle
Section. I fit the battery in the handle.
Title: Re: Korbanth Ven Zallow with NB
Post by: Alec Skirata on November 19, 2013, 12:47:17 PM
Here a Comparison...

From Top to the buttom
TCSS Saber with high quality steel overlay
Korbanth Ven Zallow with NB
OR QGJ with CF6 LS

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Ffarm6.staticflickr.com%2F5500%2F10950260735_a404fc9a26_b.jpg&hash=fa1daa45800627fe5e6f6a2697707f38efcabcce)
Title: Re: Korbanth Ven Zallow with NB
Post by: Pyromatic177 on November 19, 2013, 02:00:09 PM
Indeed that is small! But in a good way!  :D
Title: Re: Korbanth Ven Zallow with NB
Post by: daddy solo on November 19, 2013, 04:57:54 PM
I loves that saber. Nice work!
Title: Re: Korbanth Ven Zallow with NB
Post by: theta03 on November 19, 2013, 11:01:08 PM
Nice work. I like the weathering job on it
Title: Re: Korbanth Ven Zallow with NB
Post by: Timo on November 20, 2013, 01:05:22 AM
I loves that saber. Nice work!

I can imagine this beauty of a saber brings back some bittersweet memories...  :(

Haven't seen many (if any?) Korbanth/Parks Ven Zallow sabers get a full conversion/makeover!  I love the small size and detail of this hilt.  Excellent work!