FX-Sabers.com
The S.A.B.E.R. GUILD: Saber Manufacturers => Parks Sabers => Parks "SABER KIT.com" => Topic started by: vargose on September 04, 2011, 08:03:34 PM
-
Hey guys I was thinking about buying an activation box from saberkit, but I don't know how I would attach it. Any ideas on attaching box G or R to a saber?
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fwww.saberkit.com%2Fimages%2Fboxes%2Fa1.jpg&hash=e9f42ab85ef4c1faa0e8f1455d82f01b4271ba84)
-
you could drill, tap, and countersink a hole through it and drill and tap one in the hilt you are using. just like the mkvi control box is attached. one screw in the middle holds it nice and snug.
-
Ok yeah that makes sense. Now what about mounting a momentary switch on them? What kind could I use and how?