fiduciary

Author Topic: [SOLVED] Prizm 5.5 wiring check  (Read 1020 times)

0 Members and 1 Guest are viewing this topic.

Offline Alekos Fei-Long

  • No Force
  • *
  • Posts: 5
[SOLVED] Prizm 5.5 wiring check
« on: November 20, 2019, 06:17:01 AM »
Hello!
I’ve just received a Prizm v5.5 and can’t wait to start off verifying measures of my hilt, testing, soldering and finally get to my first lightsaber with sound.  :jediblue:
But my life-key-words are: “plan”, “plan” and “Ok, do - have you respect the plan?”, and so I’d like to ask for a little patience of one of you to please check if I’m planning correctly or making any huge mistake with the following wiring diagram:



Do you think it could be ok? De-facto, the only changes I made in comparison to the basic set up diagrams on the manual are the addition of a couple of RBG 5mm LED in parallel lo light up the crystal chamber and the usage of a single die RGB LED – details reported above.

Thank you, probably these kind of very basic things aren’t even supposed to be asked, but I’m kind of timorous of damaging something - so, well... thank you so much in advance!  :smiley:

ps - for admins: please feel free to let me know if this is not the correct section and sorry if I posted the image taken it from another hosting, if I'm not allowed to please let me know and I remove it.
« Last Edit: November 20, 2019, 06:35:17 AM by Alekos Fei-Long »

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: [SOLVED] Prizm 5.5 wiring check
« Reply #1 on: November 20, 2019, 06:21:56 AM »
your diagram doesn't show up (at least for me) ensure the link is https

Offline Alekos Fei-Long

  • No Force
  • *
  • Posts: 5
Re: [SOLVED] Prizm 5.5 wiring check
« Reply #2 on: November 20, 2019, 06:26:49 AM »
Uh, ok thanks, my fault I didn't see the button under the box - let's try this way:



(or https://image.forumfree.it/5/0/7/4/2/8/5/1574258999.png)

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: [SOLVED] Prizm 5.5 wiring check
« Reply #3 on: November 20, 2019, 06:30:01 AM »
diagram looks good to me down to the crystal chamber / accent leds

Offline Alekos Fei-Long

  • No Force
  • *
  • Posts: 5
Re: [SOLVED] Prizm 5.5 wiring check
« Reply #4 on: November 20, 2019, 06:34:50 AM »
Thank you very much erv! I'll head on more confident now...!  :smiley:

 

retrousse