fiduciary

Author Topic: Ezra V1 Hilt  (Read 1473 times)

0 Members and 1 Guest are viewing this topic.

Offline ashtml5

  • Padawan Learner
  • **
  • Posts: 86
  • Here we go again...
Ezra V1 Hilt
« on: October 08, 2017, 03:37:40 AM »
EZRA'S LIGHTSABER (VERSION 1)

I've grown to really love this hilt. But I wanted my version to be accurate to how it functions in the show.

Ezra can only either use the saber OR the blaster at any one time. Never both together.

INTERNALS
I have TWO Spark2 soundboards inside this hilt. One runs just the saber. One runs the blaster only.
There's one ONE 18500 3.7v battery running power to a toggle switch that directs it to the board selected.
I custom built the toggle switch inside what looks to be the activation board/matrix behind the emitter. Down position for saber. Up position for blaster.
The red triangle switch on the side of the hilt is also the recharge port and turnkey.
There are two speakers in the hilt as well. A Railmaster 28mm for the saber and a 23mm for the blaster.
Tri cree BBW for the emitter and single cree for the blaster.
Only accepts a 3/4" blade.

EXTERNALS
A lot of time went into making sure the hilt was as accurate as possible. From the original 3D printed parts, the emitter and blaster barrel were replaced with aluminium parts along with the pommel and d-ring. The 3D parts were sanded, filled, painted (several coats) then weathered to look as beaten as the rest of the equipment in Rebels.

All up at least 8 months of trial and error, painting, weathering and endless frustration. But I got there.

VIDEO
This is the hilt before final assembly and weathering testing both boards:
Ezra V1 Full Install - YouTube

Final pics (with Chopper for reference) below.

http://artofplaygames.com/lightsaber/IMG_5262.jpg

http://artofplaygames.com/lightsaber/IMG_5263.jpg

http://artofplaygames.com/lightsaber/IMG_5264.jpg

http://artofplaygames.com/lightsaber/IMG_5265.jpg

http://artofplaygames.com/lightsaber/IMG_5266.jpg

http://artofplaygames.com/lightsaber/IMG_5267.jpg

http://artofplaygames.com/lightsaber/IMG_5268.jpg

http://artofplaygames.com/lightsaber/IMG_5269.jpg

http://artofplaygames.com/lightsaber/IMG_5270.jpg








« Last Edit: October 08, 2017, 03:45:20 AM by ashtml5 »

Offline Doaln

  • No Force
  • *
  • Posts: 41
  • Impressive. Most impressive.
Re: Ezra V1 Hilt
« Reply #1 on: February 27, 2018, 03:08:08 PM »
That's actually really impressive! I've been watching season 2 of Rebels and this looks really spot on!

Offline Noir1990

  • Mining Colony Members
  • Experienced Force User
  • *
  • Posts: 374
Re: Ezra V1 Hilt
« Reply #2 on: March 01, 2018, 12:06:48 AM »
Awesome build. Hopefully we see a run of these hilts in the future.

Offline BEN KENOBI

  • Crazy Old Wizard
  • FX-SABERS VIP II
  • Master Force User
  • *
  • Posts: 8490
  • The saber scientist
Re: Ezra V1 Hilt
« Reply #3 on: March 01, 2018, 06:45:36 AM »
That is awesome!!

 

retrousse