(SOLD) Saberforge Nova hilt with RGB LED installed to an NBv4 with PEX

[Doaln]

****SOLD****



Saberforge Nova hilt with RGB LED installed to an NBv4 with PEX for full color mixing.

Specific components/features listed below:

Features:
• Saberforge’s Nova Hilt
• NECree RGB LED from Naigon’s Electronic Creations
• Nano Biscotte V4 Soundboard with Power Extender holds up to 3 saber profiles at once! With the removable microSD card, each profile can be configured to any possible color and can use any Plecter Labs compatible sound font. Comes with the Light side, Grey, and Dark side inspired fonts. Hundreds of additional fonts are available at SaberFont.com.
• I can customize the colors and sounds for you before I ship. Current configuration is as follows: Light side inspired font with Light Blue Blade that features a custom boot sound of Luke saying “You have that power too.” The neutral sound font features a boot sound of Mace Windu saying “May the Force be with you!” and utilizes a Purple blade. Finally, the Emperor’s evil laugh boots the Dark side sound font with a Yellow blade. All boot sounds from Shameem.
• Activation Switch with Purple/Pink LED Ring. The accent LED is configured to automatically shut off when the lightsaber enters deep sleep mode after 5 minutes of inactivity so that it does not drain your battery.
• An In-hilt recharge port makes it easy to recharge your battery.
• Panasonic Li-Ion 18650 3.7V 3400mAh PCB Protected Rechargeable Battery with JST Connectors. The JST connectors make the battery easy to remove or replace, with no soldering required! This is important because lithium-ion batteries will only last between two and five years on average. Even someone with no technical expertise can easily replace this battery when the time comes. This also means you can buy extra batteries now to extend the run time on the lightsaber; ideal for cosplay or conventions.
• 2W 8ohm 28mm Bass Speaker produces great sound.
• Everything is secured to a Jordan’s Custom Saber Creations Chassis (No loose wiring! No rattle!)
• A matching Blade Plug from Saberforge and a hex wrench for the blade retention screw are included. Blade & charger not included.

SOLD

Full album of high resolution pictures at Nova - Album on Imgur



Thanks for looking and May the Force be with you!

****SOLD****