fiduciary

Author Topic: Parks/Korbanth 2.0 redo with padawan Goth3 designs chassis  (Read 4043 times)

0 Members and 1 Guest are viewing this topic.

Offline ken

  • Force User
  • ***
  • Posts: 243
  • in my experience there is no such thing as luck
so i decided to redo my Graflex 2.0 with a new chassis so here is the progress so far

here is the chassis work so far still waiting on some more parts to finish the
http//:
this time around i decided to full desassemble the saber and drill a hold and a channel in the blade holder to i can put a blade in (last time i did not do this and the wires for the switch were straight though the hole of the switch housing and ran down the blade holder to there didnt allow for a blade to be installed
http//:
http//:
i also ordered a sweet 7/8th heat sink from KR-sabers/saberbay which is a huge improvement from the 1 inch heat sink i ground down to fit the 7/8th inch profile last time
http//:

thats it for now more to come soon!!  :angel: :angel:
« Last Edit: May 14, 2016, 09:01:35 PM by ken »
http://

Offline ken

  • Force User
  • ***
  • Posts: 243
  • in my experience there is no such thing as luck
Re: Parks/Korbanth 2.0 redo with padawan Goth3 designs chassis
« Reply #1 on: June 06, 2016, 08:43:42 PM »
so here is the finished product might not seem like much to some of you but its an improvement for me and a learning experience and my second install i also up graded to a NBv3
here is the hole o bore out for the glass eye shine through as well as the glass eye

http://

http://

http://

http://

http://

here is a nice close up of the shine through glass eye :angry:

http://
http://

http://
http://

so there it is in all its glory im very happy with how it turned out if you all have any suggestions or questions feel free   :grin: :grin:

Offline Oozer3993

  • No Force
  • *
  • Posts: 2
  • Lousy with midichlorians
Re: Parks/Korbanth 2.0 redo with padawan Goth3 designs chassis
« Reply #2 on: June 08, 2016, 04:53:08 PM »
Looks good! I love the glass eye! Where did you get it?

Offline ken

  • Force User
  • ***
  • Posts: 243
  • in my experience there is no such thing as luck
Re: Parks/Korbanth 2.0 redo with padawan Goth3 designs chassis
« Reply #3 on: June 08, 2016, 05:28:25 PM »
Looks good! I love the glass eye! Where did you get it?

thanks i got the glass eye off ebay i added the mesh to it it did not come like that its a piece of a speaker grill
http://

Offline Jdubs

  • Padawan Learner
  • **
  • Posts: 61
  • Um...Hello?
Re: Parks/Korbanth 2.0 redo with padawan Goth3 designs chassis
« Reply #4 on: June 19, 2016, 09:12:16 PM »
So dang cool, i actually have some speaker grill layng around.  Awesome idea

 

retrousse