- O N Y X -
elite class custom saber
A one off unique katana inspired saber I designed from scratch with my girlfriend and making it for her as a gift. The concept was to make a very simple katana style hilt with classic lightsaber details like angle cut emitter and sort of a neck section. Will be installed with the best electronics and features available in saber building community nowadays.
Features:
- 273mm long, 35.5x19mm grip
- 1 inch Neopixel blade with x2 SK6812 5050 strips
- 50 mm blade socket depth
- NPXL lit Neopixel blade connector designed by me
- full metal crystal chamber reveal with genuine amethyst lit crystal
- 3D-printed custom oval chassis in Professional Plastic (high strength, smooth semi-gloss surface)
- Proffieboard Open Source High-End sound board
- FSC-BT909 bluetooth Remote Control with "ForceSync" app (iOS and Android)
- dual 16650 2500mAh 3.7V battery with total 5000mAh capacity and 10A drain (approx. 1.5 hour of run time)
- 2.1mm recharge port
- TCS 28mm 4 Ohm 4W high bass WOWsound speaker in the emitter area
- hidden tactile switches (activation and aux) under grip wrap
- hidden set screws
- accent leds, micro SD-card, micro USD port, bluetooth switch access through the pommel
3D concept renders
(https://i.imgur.com/MWIsXnu.png?1) (https://i.imgur.com/XNOxuOk.jpg?1) (https://i.imgur.com/DljOAq2.png?1)
CAD 3D model
(https://i.imgur.com/8fGyfU9.jpg?1)
All hilt parts were CNC-machined in aluminum and brass, oval grip part was hand formed by me out of a 6061 aluminum tube of a specific diameter
(https://i.imgur.com/txCQbWQ.jpg?2) (https://i.imgur.com/xHuoQtb.jpg?2)
(https://i.imgur.com/EK24ZGX.jpg?2) (https://i.imgur.com/afhYOZG.jpg?2) (https://i.imgur.com/KYWwtxj.jpg?2)
(https://i.imgur.com/2lxdbSJ.jpg?2) (https://i.imgur.com/3MnLZCT.jpg?2)
(https://i.imgur.com/jwPqDmh.jpg?1) (https://i.imgur.com/wfaEstz.jpg?1) (https://i.imgur.com/ahdYFWG.jpg?1)
(https://i.imgur.com/CDfvO3L.jpg?1) (https://i.imgur.com/fk49keE.jpg?1)
(https://i.imgur.com/Ez8tUOw.jpg?1) (https://i.imgur.com/EOQeW2V.jpg?1) (https://i.imgur.com/5XxHUPu.jpg?1)
(https://i.imgur.com/jChZe3A.jpg?1) (https://i.imgur.com/6JKNwkB.jpg?1)
to be continued...
3D-printed chassis design
(https://i.imgur.com/mplEXYC.jpg?2) (https://i.imgur.com/aFjcoWF.jpg?2)
(https://i.imgur.com/m56ZypL.jpg?2) (https://i.imgur.com/1S6d9OR.jpg?2)
(https://i.imgur.com/Mof1xYN.jpg?2) (https://i.imgur.com/G1Xsx0P.jpg?2)
(https://i.imgur.com/38i0Qxz.jpg?2) (https://i.imgur.com/aOP02oC.jpg?2)
(https://i.imgur.com/GtW0uFG.jpg?2) (https://i.imgur.com/8F6Zp0y.jpg?2)
to be continued...
Now parts are going to sand blasting and anodizing in black...