FX-Sabers.com

Trade Federation - Buy/Sell/Trade => Misc Equipment => Topic started by: bombarta on September 27, 2016, 10:08:18 AM

Title: in stock Romans mk1 & Inception heatsinks
Post by: bombarta on September 27, 2016, 10:08:18 AM
I have currently have Romans Inception & MK1 aluminium heatsinks in stock for replacement of the steel heatsink supplied with Romans props Inception hilt.

These heatsinks will extend the life of your LEDS and allow you to run them at full power without fear of overheating or blowing the main leds.
They are also cut shorter to allow fitting if a accurate blade plug ( there is no blade holder overhang ).
Price per unit is $17 U.S. payed as goods via PayPal + shipping. PayPal fee is included in price.

Please pay $17 U.S. payed as goods plus $12 for tracked and signed delivery to gazza0728@yahoo.co.uk

Please put forum name and Inception or MK1 heatsink in PayPal note.

Thanks.

Inception.
Bombarta paid.
offsite paid.
offsite paid
Coran Horn X5 paid. Posted
Ahsoka Tano paid. Posted
Darthpool paid. Posted.
ShadyCanuck X 3 paid. Posted
cayde6 x3 paid. Posted.
Rydiddy paid. Paid posted
mvtfrmchi paid. Posted.
Thomas Rutledge FB paid posted
Jcru X2 paid. Posted
Msasin paid. Posted
Djcbooks81 paid. Posted
Jordan Eugene FB paid. Posted
Oswaldaldkefo FXS paid. Posted.
Jango Fett FXS paid. Posted
Scott Hughes FB paid. Posted
Wolf69 paid. Posted.
Grazer FXS paid. Posted Bill_Fimm FXS X2 paid. Posted.
Neverwayne X2 paid. Posted.
Darth Quito paid. Posted.
Sketcherdan paid. Posted.
Offsite X2. Paid. Posted.
gschram92 X1. paid. Posted.
Darth obi don FXS. paid. Posted.
Kai FB. Paid. hold until bp.
Kyphotic_jedi paid. hold until BP.
Shiftyscarecrow paid. Posted.
Kotaro Paid. Posted.
takeshiEP. Paid. Posted.
Kor offsite paid x1. Posted.
SpaceWindu paid. Posted.
Iggy FXS. Paid. Posted.
Ichnob paid. Posted.
ES FB. Paid. Posted.
Diego86 paid.

MK1 list.
Rydiddy X1. FX. Paid. Posted.
Bruno1067. X1 FX. Paid. Posted.
Balthazar. X1 Paid. Posted.
Wolf69. X1 Paid. Posted.
Offsite X1. Paid. Posted.
Darth obi don FXS. paid. Posted.
Philip sandifer offsite. paid. Posted.
Kai FB. Paid. hold with I. HS.
takeshiEP. Paid. Posted.
DarkSideTendencies. Paid. Posted.
Kor offsite x2. Paid. Posted.
Timbuktu paid. Posted.
macross40k paid. Posted.
Lordofthesquids paid.
P.E. offsite paid. Posted.
Darth stallion paid. Posted.
SpaceWindu paid. Posted.
Bill_Fimm X2 paid. Posted.
Ichnob paid. Posted.
Soulofche paid. Posted.
G501strooper paid.
Red Hawk. Paid.



(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_142705.jpg&hash=f4140c4e5fc08e211cc3467fb01179e1) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_142705.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_144457.jpg&hash=0a6a514b5990c5da9db3152a6ea9f7ce) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_144457.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_144536.jpg&hash=99150dee8b0c92eb1281c43f290a293e) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_144536.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_144618.jpg&hash=0f2e5b3b570965482cd827abb631e1e9) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_144618.jpg.html)
Before
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_151003.jpg&hash=2cdf2ce3f0910231fb183bf208276c9e) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_151003.jpg.html)
And after
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520Inception%2F20160930_144750.jpg&hash=d4d7578df9cf75bb964b45021ae34cda) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20Inception/20160930_144750.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_142207.jpg&hash=1530974c4901a2923edae6c17004dd82) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_142207.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_142419.jpg&hash=887e620939cfee9559e5abf5c3b64d96) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_142419.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_142222.jpg&hash=63a5bef213804d8d10606fd236a79227) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_142222.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_151558.jpg&hash=b62878b3e888bf8b59e785fe3adc4961) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_151558.jpg.html)

Thanks.

Bomb.
Title: Re: Romans Inception aluminium heatsink
Post by: RyDiddy on September 27, 2016, 10:39:33 AM
I'm in for one
Title: Re: Romans Inception aluminium heatsink
Post by: jamiemp on September 27, 2016, 12:48:58 PM
Interested
Title: Re: Romans Inception aluminium heatsink
Post by: bombarta on September 28, 2016, 12:08:42 PM
Bump
Title: Re: Romans Inception aluminium heatsink
Post by: oswaldkefo on September 29, 2016, 09:05:03 AM
Ooooh count me in please!
Title: Re: Romans Inception aluminium heatsink
Post by: Caine on September 29, 2016, 09:06:59 AM
If these will also work for a MK1, count me in
Title: Re: Romans Inception aluminium heatsink
Post by: grazer on September 29, 2016, 09:35:09 AM
If these will also work for a MK1, count me in

Do these fit in the MK1? If so, I'd like one.
Title: Re: Romans Inception aluminium heatsink
Post by: JANGO FETT on September 29, 2016, 10:33:44 AM
I'm in for 1.

Title: Re: Romans Inception aluminium heatsink
Post by: bombarta on September 29, 2016, 11:16:06 AM
Caine & Grazer, I don't know if they are the same size thread.
Can someone confirm if the Romans mk1 has the same heatsink as the Inception?
Title: Re: Romans Inception aluminium heatsink
Post by: jamiemp on September 29, 2016, 10:21:13 PM
If it is the same as the MK1 I will take a few.
Title: Re: Romans Inception aluminium heatsink
Post by: bombarta on September 30, 2016, 07:41:40 AM
Now in stock.
Price and payment details in first post.

Also if anyone has a Romans mk1 that they can send the steel heatsink to me to check for size and thread I, will send it back with a free aluminium heatsink if it is the same.

Bomb.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: Dark Navel on September 30, 2016, 11:26:34 AM
I'll take one please.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: jamiemp on September 30, 2016, 12:34:59 PM
I'll take 2.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: grazer on September 30, 2016, 04:01:08 PM
I'll take my chances on one. Count me in, please.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 01, 2016, 12:57:37 AM
I'll take my chances on one. Count me in, please.

Added to list.

Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 03, 2016, 12:19:45 PM
First bunch ready to go.

Hopefully I'll have them posted tomorrow.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: grazer on October 03, 2016, 03:59:16 PM
My payment went out today. Excited to see this piece of kit.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: Wolf69 on October 03, 2016, 03:59:41 PM
In for one
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 03, 2016, 04:41:28 PM
In for one

Wolf your already on the list.
Contact me for payment details, also your message inbox is full, I tried to pm you yesterday.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: Janias Saarkhan on October 05, 2016, 12:15:08 AM
Please add me for one. Thanks!
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 07, 2016, 02:32:23 AM
I'll give the remaining people on the list who have not paid until next weekend to pay, after that the list will be removed and then it will be first come first served.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 11, 2016, 06:20:59 AM
Bump
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 14, 2016, 02:57:16 AM
Bump
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bill_fimm on October 16, 2016, 02:00:35 PM
I have both the Inception and the MK1. They are not identical. The thread is the same, but they are not an even swap. 
Inception on left, MK1 on right.

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi346.photobucket.com%2Falbums%2Fp422%2Fbill_fimm%2F79D4FDA7-6AAA-4574-AB3C-CC879C652958_zpsjwhkes5o.jpg&hash=8d8181e3f92fe2d739ac3755bbf7629f) (http://s346.photobucket.com/user/bill_fimm/media/79D4FDA7-6AAA-4574-AB3C-CC879C652958_zpsjwhkes5o.jpg.html)

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi346.photobucket.com%2Falbums%2Fp422%2Fbill_fimm%2F325FE0AC-CBFA-48C9-A8B7-898BCCF38531_zps0g2tipvt.jpg&hash=fd377a3d71ddcf812d68610df4579c15) (http://s346.photobucket.com/user/bill_fimm/media/325FE0AC-CBFA-48C9-A8B7-898BCCF38531_zps0g2tipvt.jpg.html)
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 16, 2016, 02:10:09 PM
The thread needs to be cut all the way to the base of the heatsink for the mk1 as well as being shorter.
I will be starting an interest thread for the mk1 in the coming week.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bill_fimm on October 16, 2016, 03:44:42 PM
Here is another pic of them both if it helps you out, the Inception being the left one. I would definitely be in for 2 of them if you made the MK1 version.  Thanks.

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi346.photobucket.com%2Falbums%2Fp422%2Fbill_fimm%2FC0A4A8E5-9B99-46B8-B606-4E1A4E19D6AB_zps3gkxwx5j.jpg&hash=0200b96bb9f48ab9c468506dd8bd8928) (http://s346.photobucket.com/user/bill_fimm/media/C0A4A8E5-9B99-46B8-B606-4E1A4E19D6AB_zps3gkxwx5j.jpg.html)
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 18, 2016, 03:48:37 AM
These are now first come first served. Anybody on the list who has not paid have now been removed.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 21, 2016, 10:46:16 AM
Bump
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bill_fimm on October 24, 2016, 02:54:39 PM
Got mine today.. a great fit... Thanks!
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on October 27, 2016, 08:01:49 AM
Bump
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on November 01, 2016, 07:23:50 AM
Bump
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on November 08, 2016, 03:41:11 PM
Bump
Title: Re: in stock Romans Inception aluminium heatsink
Post by: RyDiddy on November 08, 2016, 04:13:22 PM
Hey Bomb, are these compatible with the mk1 ANH Roman Obi hilts?
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on November 08, 2016, 11:33:19 PM
Hey Bomb, are these compatible with the mk1 ANH Roman Obi hilts?
Hey bud, they are the same thread but the threaded section  needs to be shorter and the thread also needs to be cut right up to the bottom of the heatsink to work.

Should I start an interest thread for mk1 heatsinks?

Bomb.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on November 19, 2016, 01:37:53 PM
Bump
Title: Re: in stock Romans Inception aluminium heatsink
Post by: RyDiddy on November 27, 2016, 08:21:14 PM
Hey Bomb, are these compatible with the mk1 ANH Roman Obi hilts?
Hey bud, they are the same thread but the threaded section  needs to be shorter and the thread also needs to be cut right up to the bottom of the heatsink to work.

Should I start an interest thread for mk1 heatsinks?

Bomb.

Just bought a MK1 today while it's on the Black Friday sale.  I would definitely get one if you do a run
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on November 28, 2016, 03:28:27 AM
Hey Bomb, are these compatible with the mk1 ANH Roman Obi hilts?
Hey bud, they are the same thread but the threaded section  needs to be shorter and the thread also needs to be cut right up to the bottom of the heatsink to work.

Should I start an interest thread for mk1 heatsinks?

Bomb.

Just bought a MK1 today while it's on the Black Friday sale.  I would definitely get one if you do a run

It's looking likely that I will have the mk1 made. Probably be ready January-February.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: sketcherdan on November 29, 2016, 02:16:28 AM
Interested pm sent
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on November 29, 2016, 03:17:23 AM
Interested pm sent

Replied.
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on December 06, 2016, 10:25:05 AM
Bump
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on December 12, 2016, 06:20:43 AM
Bump
Title: Re: in stock Romans Inception aluminium heatsink
Post by: bombarta on January 02, 2017, 02:22:51 AM
Bump  :grin:
Title: Re: in stock Romans Inception heatsink & mk1 interest
Post by: bombarta on January 11, 2017, 03:13:13 PM
This is now also the interest thread gor mk1 heatsinks.
Title: Re: in stock Romans Inception heatsink & mk1 interest
Post by: JANGO FETT on January 11, 2017, 09:14:29 PM
How about a prop accurate blade plug that fits over the Inception Heatsink you made?

Title: Re: in stock Romans Inception heatsink & mk1 interest
Post by: RyDiddy on January 11, 2017, 10:53:58 PM
How about a prop accurate blade plug that fits over the Inception Heatsink you made?

Plugs for the inception and mk1 would be awesome
Title: Re: in stock Romans Inception heatsink & mk1 interest
Post by: bruno1067 on January 12, 2017, 10:20:07 AM
Hey Bomb, I'm interested in a MK1 heatsink! Do you have them already? PM me with the payment details if you do!

Thanks!
Title: Re: in stock Romans Inception heatsink & mk1 interest
Post by: Timbuktu on January 19, 2017, 05:18:11 PM
I maybe interested in a MK1 Heatsink, subject to design & price, do you have details & photos, thanks...
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on January 20, 2017, 07:55:27 AM
MK1 heatsinks now in stock.

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_151558.jpg&hash=b62878b3e888bf8b59e785fe3adc4961) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_151558.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2FRomans%2520MK1%2F20170120_142222.jpg&hash=63a5bef213804d8d10606fd236a79227) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/Romans%20MK1/20170120_142222.jpg.html)


Bomb.
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: Timbuktu on January 20, 2017, 11:45:27 AM
Thank you for the MK1 update, in relation to the MK1 heatsink is it possible to see a side by side image, I would like to see the comparison, is your replacement heatsink the same size & dimensions? thank you!
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on January 26, 2017, 01:05:41 PM
Bump  :tongue:
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on January 28, 2017, 05:11:58 AM
Bump
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on January 31, 2017, 11:43:02 PM
Bump
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: Darth Obi Don on February 04, 2017, 11:18:22 AM
I'd like 1 of each. Do you combine Shipping if I order both at the same time, or is it S.H. x 2
?
Don Mac.
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on February 04, 2017, 01:48:12 PM
I'd like 1 of each. Do you combine Shipping if I order both at the same time, or is it S.H. x 2
?
Don Mac.
Shipping is combined.
So it will be $34 plus which ever choice of shipping you choose as there weight is so light they would need to be around 10 for the cost to increase.
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: Darth Obi Don on February 05, 2017, 07:01:14 AM
I'd like 1 of each. Do you combine Shipping if I order both at the same time, or is it S.H. x 2
?
Don Mac.
Shipping is combined.
So it will be $34 plus which ever choice of shipping you choose as there weight is so light they would need to be around 10 for the cost to increase.
Excellent. Payment sent for 1 of each + Standard shipping.
Don Mac.
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: Timbuktu on February 15, 2017, 03:05:47 PM
Payment sent for 1x MK1 Heat Sink, thanks...
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on February 15, 2017, 04:01:11 PM
Payment received thank you.
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on February 23, 2017, 12:47:42 PM
Bump
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: Timbuktu on February 26, 2017, 06:45:52 PM
MK1 Heat Sink received and installed super happy  :grin:
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bill_fimm on March 01, 2017, 06:29:49 AM
Payment sent for  MK1 (x2) heatsinks. Thank you.
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on March 01, 2017, 08:26:29 AM
Payment sent for  MK1 (x2) heatsinks. Thank you.
Received. Thank you.
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on March 01, 2017, 12:34:53 PM
Only 4 Inception heatsinks left.
30 MK1 in stock.
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on March 09, 2017, 06:26:36 AM
Bump
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on March 10, 2017, 04:26:09 PM
Bump
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on March 17, 2017, 06:01:36 AM
Bump
Title: Re: in stock Romans Inception & mk1 heatsinks
Post by: bombarta on March 21, 2017, 02:35:15 PM
1 Inception heatsink left in stock.
Plenty of mk1 available.
Title: Re: in stock Romans mk1 heatsinks
Post by: bombarta on April 10, 2017, 03:25:24 AM
Inception Sold out.

Still plenty of mk1 in stock.
Title: Re: in stock Romans mk1 heatsinks
Post by: bombarta on April 21, 2017, 03:00:43 PM
Bump.
Title: Re: in stock Romans mk1 heatsinks
Post by: bombarta on May 04, 2017, 12:44:14 AM
I have now removed standard delivery as an option because two parcels have arrived damaged without their contents. As a good will gesture I replaced the items free of charge even though standard shipping was at own risk.

Bomb.
Title: Re: in stock Romans mk1 heatsinks
Post by: bombarta on May 04, 2017, 07:02:54 AM
these are shine versions for Rydiddy.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2Fblade%2520plugs%2F20170428_172232.jpg&hash=47cd59eedec16fc31505bc1d231d14df) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/blade%20plugs/20170428_172232.jpg.html)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1138.photobucket.com%2Falbums%2Fn525%2Fgazyang%2Flightsabers%2Fblade%2520plugs%2F20170428_172247.jpg&hash=4477b4b52946dd8c88298f503df974f0) (http://s1138.photobucket.com/user/gazyang/media/lightsabers/blade%20plugs/20170428_172247.jpg.html)

Bomb.
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: bombarta on June 03, 2017, 07:15:08 AM
Inception heatsinks back in stock
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: bombarta on June 03, 2017, 10:32:42 AM
Ok guys there is simple instructions on how to pay at the start of the thread. I also tell you what to do when I message payment details.

When I ask for your forum name and what you are paying for to be put in the PayPal note that's what I expect, unfortunately the Force isn't real so I don't have Jedi mind powers to decipher who has sent me money with out those details.
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: bombarta on June 05, 2017, 11:41:41 PM
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: bombarta on August 04, 2017, 08:44:35 AM
Bump  :tongue:
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: DarthMario95 on August 21, 2017, 01:13:34 AM
Payment sent for

2x Inception heat sink
2x Inception blade plug
1x MK1 heat sink
1x MK1 blade plug

Thanks.
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: bombarta on August 21, 2017, 03:21:59 AM
Payment sent for

2x Inception heat sink
2x Inception blade plug
1x MK1 heat sink
1x MK1 blade plug

Thanks.
Received. Thanks.
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: Red Hawk on September 08, 2017, 01:10:13 PM
Hey Bomb, just sent through a payment for one Mk1 heatsink.  Thanks so much!
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: El toro on October 04, 2017, 12:52:26 PM
Hi. I just paid for an inception heat sink and blade plug.  Thanks! 
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: bombarta on October 04, 2017, 01:21:34 PM
Hi. I just paid for an inception heat sink and blade plug.  Thanks!
Received thank you.
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: bombarta on October 30, 2017, 10:06:29 AM
Bump
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: bogeytron on November 30, 2017, 04:45:41 PM
How much for shipping a MK1 heatsink and a MK1 blade plug in the UK together?
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: bombarta on November 30, 2017, 11:16:55 PM
How much for shipping a MK1 heatsink and a MK1 blade plug in the UK together?
4.50
Title: Re: in stock Romans mk1 & Inception heatsinks
Post by: ZombieMacabre on January 20, 2018, 09:27:16 PM
I'm sending money now!