After speaking with Jango, who has sanctioned this thread and the run, he has asked that I post an interest thread here for those who were on the Legacy Killer Penny run who are interested in getting a display stand for this saber.
The stand will be made from several different types of acrylic, will include a plaque, and will hold the saber within its blade holder like a blade plug.
Please note, this will be open for those who own a Legacy Killer Penny saber. Thereafter, the design may possibly be made available for others who are interested in the design. You may still post your interest here if you are not currently an owner of a Killer Penny, but this will initially be an exclusive design for owners of the saber.
I've come up with some renders of a proof of concept and am open to suggestions for some modifications and selections of colors/materials for the run.
Below are a few pictures of the proof of concept, which is subject to change and I am open to recommendations for suggestions.
Plaque:
The parts in red are for laser engraving, which will show in a frosted white on the acrylic. The plaque will either be on a gold mirrored acrylic, or possibly on a clear acrylic with the letters painted in gold or copper paint.
Pommel Side Arm:
There are 2 renders I have come up with for the arm that will hold the back end of the saber.
Base of the stand and main arm:
The concept is to either have a round base or octagon base with two colors of acrylic layered on top of one another.
Feel free to post your interest here, and if you are interested in a stand to post any suggestions you may have for the design.