(RESOLVED) Odd "blaster blocking" issue on Prizm 5.1

[jeremy.g]

I've been tweaking fonts on my new Prizm, and it's coming along nicely!

But I've got one problem I could use some help on.
I have 5 fonts loaded.
For my 'red blade' font, the blaster block feature works great.
For any font with a blade color OTHER than red, things act up.
For instance:  One font has a blue blade.  When I trigger blaster, the blade turns red while the blaster.wav is playing, and impacts white (as it should) then the blade returns to its normal color (blue)
Is there a config line that separately defines blade color *while the blaster.wav is playing*?

Similar problem with the other fonts.  The blade either changes to red, or goes completely dark while blaster.wav is playing.

Thanks for the assistance!

-Jeremy

[erv]

you need to adjust the FoC mixing of your color profile (see dedicated paragraph in the manual regarding shimmer vs foc timelines).
Bottom line : you have one dice following the shimmer, the other one the foc timeline. As they are 2 different parameters with their own duration, you see the transition between the 2.

[jeremy.g]

Success!  Fixing values for fdrive and focmix did the trick.

I bought this Prizm so I'd have something to play with while waiting for the next Crystal Focus.
So far, I'm quite happy!  Lots of great features, and a real step up from the Pico Crumble I put in my daughter's saber.
There's definitely a learning curve to the config files, but I'm enjoying figuring it all out.

Thanks for the help, Erv'!

-Jeremy

[erv]

you're very welcome jeremy