New 2016 Korbanth Run - DM1 double ended saber 2 slots left

[korbanth]

I started a thread over on Elite Lightsaber Society FACEBOOK group - I was getting asked nearly every day if I had any more DM1 sabers in stock, this is the double ended (can split in the middle) saber handle, so since I was out, I worked a quick deal to get more of these...around 50 units..so it was a 1 time purchase.

while the Graflex 2.0's are being made, and the MPP 2.0, DV6, K4, and OWK are being prototyped and worked on, they can sneak in a quick run of DM1 product for a June Delivery.  These will look like these images below, and are only $200 each  (you get both sides, for a complete hilt)

Some options are:

$30 for optional weathering like as seen below
$25 for a working on/off red knurled knob - optional
and I'll be getting 50 KR Sabers DM1 couplers, contact me about pricing

These are already ordered, I do not need any minimums of people buying in order for me to "consider", this is a done deal, you can pre-order it now to secure it or wait until they come in, but 32 orders out of 50 have already been paid for, which is why this run is a done-deal....

paypal payments for the $200 for the double ended saber goes to triomirett@gmail.com - choose your options or select no options.  for questions to come to me directly, just email me at korbanth47@gmail.com

thanks - enjoy the images







FX-saber member, HARP of this board lit up some DM1 sabers recently, this is his work below

[korbanth]

I guess I filled the need here on the FX-Forums, 100% with the last "trio" run huh?  not a single person wants or needs to get a $200 DM1 (double sided saber)  ?     LOL

ok..I've already sold 30 of the 50, so if anyone needs one for a June Delivery, email me - korbanth47@gmail.com

[Rstynls]

Money sent for a set.

[korbanth]

confirmed

[Elim Vos]

Oh man,
If there are any left on Monday(no guarantee) I will definitely take a set. Weathered with the working red knobs.
I want to rebuild my collection


Elim

[oswaldkefo]

Any chance the functioning knurled activation switches would be available for purchase separately? I got one of the DM1S earlier, but was unable to snag those

[SithSim]

Hey Randy, I sent my payment on 4/13/16 via Paypal.

[Derro Kuspin]

Since this hilt is in fact two hilts combined (I hope I got this right?) - do I have to purchase the working red knob twice? Or are the $25 for a set of two switches?

[korbanth]

for $200 - you get an empty (double sided) saber hilt that comes apart in the middle or stays together like the staff it should be, the red knurled knobs that come with are non working. 

some upgrades are:

on/off working red knurled knobs, I purchase from Park sabers for $25 each (I am not marking up, $25 is what I pay)
so if you want one for each side, its $50

These come with a coupler, to hold the two halves together, but KR sabers makes a very nice one, if you want to add one to your order then contact me for a price, and it replaces the simple coupler with a much nicer one.

Final options, are for $30 my local artist can weather it like you see in the Photos

and if you want the saber to be lit up with sound boards and removable blades, I have a list of installers who can, you just need to ask me.

These will be shipped to me towards end of June.  Thank you
Randy

[korbanth]

Machined Aluminum saber, double ended, with 4 red knurled knobs, comes apart in the middle, and has two end caps, emitters will take 7/8 inch blade on each side, and can be bored out by the buyer to take a 1 inch blade, as an option. Doing a fan run, will be in hand by June 15th if you order now - paypal payments go to triomirett@gmail.com - $200 US dollars (postage to be collected later) - options you can either add now or add later are: - weathering as seen in one of the photos - $30 / optional detailed middle connector sold by KR sabers / optional red working on/off knurled buttons $25 each -

Again, $200 each - paypal to triomirett@gmail.com - you get both sides, and these will arrive mid June 2016, and I can send anywhere in the world

Here is the list of who has purchased - and only 10 out of 50 left to pre purchase

 Slot 1 - Frank O - DM1 x1 - 2 working buttons
 Slot 2 - David R - DM1 x1 - 2 working buttons
 Slot 3 - Dabe C - DM1 x1
 Slot 4 - Alan P - DM1 x1
 Slot 5 - Jordan L - DM1 x1 - 2 working buttons and KR coupler
 Slot 6 - Darren Q - DM1 x1 - 2 working button and KR Coupler
 Slot 7 - Jerry Y - DM1 x1 - 2 working red buttons and weathering
 Slot 8 - Robert F - DM1 x1 - 2 buttons / KR coupler and weathering
 Slot 9 - Simeon - DM1 x1 -
 Slot 10 - Thomas W - DM1 x1
 Slot 11 - Micah M - DM1 x1
 Slot 12 - Tyler P - DM1 x1 - 2 working buttons, 1 KR coupler
 Slot 13 - Marco G - DM1 x1 - 2 working buttons, 1 KR coupler
 Slots 14-37 - Anonymous Buyer bought 24 units - 9 KR couplers
 Slot 38 - Gregory S - DM1 x1 - 2 working buttons, 1 KR coupler
 Slot 39 - Caldwell B - DM1 x1
 slot 40 - JeanChristophe M - DM1 x1 - 3 buttons
 Slot 41 - Kyle G - DM1 x1 - weathering, 2 buttons, 1 KR coupler
 Slot 42 - Michael Y - DM1 x1 - 2 buttons, 1 KR coupler
 Slot 43 - Gray S - DM1 x1

 Slots 44-50 still left - 6 sabers still unsold from this June 2016 run
 

[Elim Vos]

So just to clarify for those who are trying to do the math...

DM staff
+Weathering
+2 working red nobs
=$280

I will be picking this up Monday night


Elim

[coldvizjerei]

Are those red accent LED-esque looking things next to the red knobs actual accent LEDs that come with it?

[Elim Vos]

If you look at the third pic with the bag, they do look like 5mm led. But could be wrong...




E

[korbanth]

Are those red accent LED-esque looking things next to the red knobs actual accent LEDs that come with it?

YEP

[korbanth]

Michael Nickle's very own DM1(KR Sabers Couplers) with Install done by Vince Sutherland of SoCal Saber Services





You can see the lit LED's in there