Hey all. So recently I have been hoarding all the materials I need for my very first lightsaber build. I have an ESB Flex from VV on order and decided to do a ANH version myself, so I can have both sabers.
I will be uploading tons of pictures as all my parts start coming together and kit arrives.
This will also help me keep track of what I have just, in case I lose anything.
1x 4-40 Tap And Drill
1x 8-32 Tap And Drill
1x Tap Wrench
1x Anti-Static Band
1x Arctic Silver 5 Thermal Paste (not a fan of the star tape)
1x Weller 40 Watt Soldering Iron
1x 60/40 Rosin Core Solder
1x Rosin Solder Flux
1x Electrical Tape
1x Wire Cutter and Wire Stripper
1x Mini-Vise
1x 7/8 heatsink (have another one coming in, will be using a copper instead of the one pictured)
1x Nano Biscotte V3 + SD card
1x Dremel 200
1x 4-40 Threaded Rod 12' (2)
1X TCSS Glass Eye
3x Assorted 8-32 Set Screws (for led/heatsink)
6x 28 AWG Wire (assorted colors)
1x Bundle of Heat Shrink
1x Tri-Cree LED XPE-2
1x Veco 28mm Speaker
1x Tenergy 18650 Li-on Battery (have another brand coming in hopefully)
1x GOTH Padawan 2.0 Chassis (received the Spark 2/Igniter 2 one)
1x DarkLyte Customs Graflex 2.0 Stand with Jedi logo
1x Helping hands (not pictured)
4x 1 ohm 2 watt Resistors (4 just cause lol)
2x-Graflex Replica Thumbscrews from the Graflex Shop (1 for ANH and 1 for VV Flex ESB)
1x-Eye Glass Replica Thumbscrew from Graflex Shop (Will be compared with TCSS)
Blade Plugs (All 1" but threw them in the photo, cause they are sick. DarkSideEngineering R2TB, KR Sabers Graflex V1, and Kenobi's Keep Arc Reactor Crystal)
All this has been gathered using TCSS, Amazon, Home Depot and Sears
Still have yet to receive...
2.1mm jack
NEW 18650 Li-On Battery
3.7 Smart Charger
Graflex 2.0 Kit
NBv3 GOTH Padawan Chassis
This is all coming off my head, so I'm sure I missed something. I'll edit later.