This saber started life as a solid static Limited Edition Qui-gon, manufactured by Master Replica's. The emitter/neck section was a 3-part piece, held together with a long threaded bolt and nut. Took a while to get TO the bolt, and then to get the bolt out. Lots of boring and milling later, as well as a complete dissassembly and re-assembly left us with this:
MR Qui-Gon Limited Edition saber
PC2.0 running FATES
Tri-rebel GGW with GG for main, W for FoC
7.4v 14500 li-on battery pack
1.3mm recharge port beneath screw on pommel
rectangular 2w 8ohm speaker positioned mid hilt
hidden/recessed main/aux switch placed in one of the shrouds cutouts
1" blade opening
Select build pics:
The neck and emitter section and securing them to the main body and getting what I needed to fit inside there were by far the most difficult part of this build. Still need to drill and tap the blade retention screw but figured I'd get this one posted ;)