fiduciary

Author Topic: Quick question about OWK  (Read 2221 times)

0 Members and 1 Guest are viewing this topic.

Offline bruno1067

  • Padawan Learner
  • **
  • Posts: 96
  • Size matters not
Quick question about OWK
« on: March 01, 2017, 04:56:54 AM »
Hi, decided to give it a try on a DIY saber and ended up with a silly question: How do I attach the rivet-like thingies on the OWK emitter? Do I just force my way through? Decided to ask first to avoid to brake something...


Offline gschram92

  • No Force
  • *
  • Posts: 14
  • Um...Hello?
Re: Quick question about OWK
« Reply #1 on: March 01, 2017, 06:08:04 AM »
I just used a wooden table and pressed them in hard. Make sure it's the very last thing you do on your instal though. You'll mess them up trying to get them out if you have to take apart the emitter.

Offline bruno1067

  • Padawan Learner
  • **
  • Posts: 96
  • Size matters not
Re: Quick question about OWK
« Reply #2 on: March 01, 2017, 07:26:28 AM »
Oh, good to know!

Thanks!  :azn:

Offline Brains001

  • No Force
  • *
  • Posts: 7
  • Um...Hello?
Re: Quick question about OWK
« Reply #3 on: March 02, 2017, 10:22:01 AM »
are they supposed to be pressure fit?, The ones on mine are too loose

Offline bruno1067

  • Padawan Learner
  • **
  • Posts: 96
  • Size matters not
Re: Quick question about OWK
« Reply #4 on: March 04, 2017, 08:05:27 AM »
Hey guys, got the answer from the man himself by email. Yes, they are just pressure fit.

Offline gschram92

  • No Force
  • *
  • Posts: 14
  • Um...Hello?
Re: Quick question about OWK
« Reply #5 on: March 04, 2017, 10:20:53 AM »
are they supposed to be pressure fit?, The ones on mine are too loose


Only one of mine was really pressure fit, the others were a LITTLE loose. I just dabbed some e6000 on them and they're good to go

 

retrousse