FX-Sabers.com
Trade Federation - Buy/Sell/Trade => Misc Equipment => Topic started by: EXAR KUN on April 05, 2019, 09:40:48 PM
-
(https://live.staticflickr.com/7891/47546576171_767d7334a3_b.jpg) (https://flic.kr/p/2frwCAF)
In association with JBKuma and the Mad Science WorkShoppe on this forum, I present to you Space Windu Pixel Blade Plugs for Plecter Pixel standard connection systems.
For use with Plecter Pixel, The Custom Saber Shop TCSS standard connectors for Neopixel lightsabers also known as POGO connectors, these RGB addressable Pixel LEDs will ignite a custom blade plug, one you purchase, or a blade plug you make from scratch. Use them in the blade side adapter at TCSS available in several sizes for all diameter blades:
http://www.thecustomsabershop.com/78-Thin-Walled-NeoPixel-Blade-Adapter-P1348.aspx (http://www.thecustomsabershop.com/78-Thin-Walled-NeoPixel-Blade-Adapter-P1348.aspx)
NEW V2 SPACE WINDU BLADE PLUG CHIPS AVAILABLE NOW
(https://live.staticflickr.com/65535/48680907857_b641807502.jpg) (https://flic.kr/p/2haLnTx)
(https://live.staticflickr.com/65535/48680907832_4ca9aba17f.jpg) (https://flic.kr/p/2haLnT7)
Space Windu blade plugs work in any pixel lightsaber including those powered by Plecter Labs, Proffie, Teensy, NEC, and more
Check out this video for the V1 for more information:
Space Windu RGB Neopixel/Plecter Pixel Blade Plugs - YouTube (https://youtu.be/MUD8iZhr7tk)
V2 Space Windu Blade Plug Chip video:
NEW: V2 Space Windu Pixel Blade Plug Chips - YouTube (https://youtu.be/CfeESRIiric)
Specs:
-Built-In Resistance
-Millions of Colors
-Colors match to your neopixel blade
-Fits blade side adapters from TCSS
-Works with any pixel lightsaber using the standardized adapter
-Every blade plug chip is tested by Space Windu and JBKuma
NEW ADDITIONAL V2 FEATURES:
-A total of 5 RGB Pixel LEDs, now with one Pixel LED in the center to channel light more fully into your blade plug
-Now with connections on the top for + - and Data out for more accent pixels in your blade plug (or for Mini-blade creation)
-Light-Reflecting White PCB
Price per V2 blade plug chip: $10.00 plus 5.00 shipping in the Continental United States.
Purchase 3 SpaceWindu Blade Plug Chips and get one for free.
Ask for shipping costs outside the United States. Will combine shipping costs for multiple pixel plug orders.
(https://live.staticflickr.com/7866/47546576101_9397244888_b.jpg) (https://flic.kr/p/2frwCzt)
-
I would like to order one of these!
-
I would like to order one of these!
PM Sent with payment instructions thank you :)
-
Hello, I would like to order a bunch of these, please let me know how to put hase
-
Hello, I would like to order a bunch of these, please let me know how to put hase
Hey there my friend I'll send you a PM to ask what you need,
-
I would like one. Please PM on how to send the payment. Thanks!!
-
I would like one. Please PM on how to send the payment. Thanks!!
PM sent thank you
-
how do i order
-
how do i order
Hi, you can PM me with how many you'd like and I'll give you my paypal info
-
Exar Kun you are the man! I already recieved my order. Thank you!
-
Exar Kun you are the man! I already recieved my order. Thank you!
Awesome! Thank you
-
I have used these in a few blade plugs already, and they are awesome.
-
I have used these in a few blade plugs already, and they are awesome.
Thank you for saying so :)
-
I'm interested in 3 of these as well!
-
I'm interested in 3 of these as well!
Thank you I sent you a PM :)
-
Blade Plug chips are sold out for now.
A new design by JBkuma is coming in stock soon,
-
(https://live.staticflickr.com/65535/48680907857_b641807502.jpg) (https://flic.kr/p/2haLnTx)
(https://live.staticflickr.com/65535/48680907832_4ca9aba17f.jpg) (https://flic.kr/p/2haLnT7)
New SpaceWindu Blade Plug Chips available soon.
Improvements include a light-reflecting white PCB and a fifth RGB Pixel LED in the center to shine up the middle of your blade plug.
Also, use these as your blade-side connectors to make a 'mini blade' of a few inches long or use the new +, - and data out for more accent pixels in your blade plug.
More information in first post
-
Version 2 Space Windu blade plug chips designed by JBkuma now available here.
NEW: V2 Space Windu Pixel Blade Plug Chips - YouTube (https://youtu.be/CfeESRIiric)
-
I’d like the buy three get one free option! Where do I send payment? I’m assuming the shipping stays the same for four pcbs ($5)?
-
I’d like the buy three get one free option! Where do I send payment? I’m assuming the shipping stays the same for four pcbs ($5)?
Thank you, Yes, the same shipping cost for one as there is for four. My paypal address is alagaipa@yahoo.com
Please enter your shipping info in the paypal notes or send me a PM with shipping info.
-
I'd like to purchase two please!
-
I'd like to purchase two please!
PM sent thank you
-
Hello I am interested in purchasing one of these
-
I too am interested, if still available!
-
Hello I am interested in purchasing one of these
I too am interested, if still available!
Hey guys, thank you. Yes, I have V2 SpaceWindu blade plug chips available.
-
PM sent
-
Hello I am interested in purchasing one of these.
PM Sent. Thanks!!
-
Thanks guys, everyone's orders have been shipped.
Space Windu Pixel Blade Plug Chips remain in stock and are available.
-
Any particular blade plugs these work/fit best with?
-
The PCBs are 18.5mm in diameter, so anything with a 7/8" or 3/4" ID can work. The 1in thin blade TCSS adapter works, but for a tighter ID you may need to modify something or glue it in. I have used these in 3/4" ID plugs with a 3D printed retainer.
-
I’m in...do you have enough to by 6 and get 2 free?
Also watched the YouTube video...you say that with the new contacts, we can add a ‘small’ strip. Assuming this is based on current rating, or else someone might attempt to use for a full blade...what is the max that you recommend?
No 330 resistor required to add a neo strip?
Thanks, excited to get my hands on these!
-
A resistor is never strictly required, the PCB already has an input resistor. The traces are not very wide because there wasn't much room with the tight arrangement of pixels. There is no point to using one of these for making a blade, the light from the LEDs won't contribute anything meaningful.
-
Thanks JBKuma. I thought that I read that part of the reason behind the Shtok blade pcbs with pixels. Was because people thought the very base of the blade could be brighter...maybe I misread.
-
I would like to order one of these blade chips please.
-
Thanks JBKuma. I thought that I read that part of the reason behind the Shtok blade pcbs with pixels. Was because people thought the very base of the blade could be brighter...maybe I misread.
Not enough light will not make it through all of the diffusion between PCB and where the blade extends from the blade holder to make it worth doing.
I'm not sure where you ready that, but not everything you read is true.. How are the LEDs in the hilt supposed to shine through the PCB, PCB holder?
-
I would like to order one of these blade chips please.
Thanks Death Star Rising. You can send 10.00 + 4.00 shipping through Paypal to alagaipa@yahoo.com and I'll get that out to you
-
I think my last request got lost in the wash...I’m in for buy 3 get one x 2 if you have enough in stock!
-
I think my last request got lost in the wash...I’m in for buy 3 get one x 2 if you have enough in stock!
Hey there Scott!
Sorry if I missed a message from you. Sure, I do have them in stock. You are looking to get a total of 8? Sure, no problem. I'll hit you up via PM with payment info shortly.
~SW
-
No worries, I’m still in! And loving the blade demos!
-
Payment sent for 1. Thanks.
-
Payment sent for 1. Thanks.
Thank you Scarecrow I'll get that out in the mail tomorrow :)
-
I would like to purchase 3 blade plug chips please.
-
Still have these in stock?
-
Awesome job on these, Space...I hope you can keep them in stock because I am going to be ordering more soon! Turned pixel blade plug builds into a 30 second job!
-
these look pretty sweet just came across the video on youtube can i get a pm with more info and pricing??
-
Still have these in stock?
Hey guys,
Yes, I've got a large stock of these if anyone is interested.
For more info and easy ordering you can check them out at my website CivilizedSabers.com
-
Interested in the 3+1! PayPal?
-
Hi mate, would I be able to get a quote for 4 shipped to Australia?
Cheers