The battery drain is too much.... by any chance could you modify the color profile to make where it doesn't draw too much power to the LED, make it more like Prizm v4 friendly? And that you can modify the Color Profiles so I can just copy into the Prizm 5.5?
Prizm V4
## Color profiles
color0=0,940,0
fcolor0=940,430,0
color1=0,0,940
fcolor1=900,0,940
color2=940,0,0
fcolor2=0,630,400
color3=0,830,400
fcolor3=700,940,0
color4=840,0,630
fcolor4=0,0,940
color5=940,430,0
fcolor5=0,940,0
color6=740,930,0
fcolor6=0,740,600
Prizm V5.5
## Color profiles
color0=1023,0,0
fcolor0=1023,1023,1023
mcolor0=001
color1=1023,255,0
fcolor1=1023,1023,1023
mcolor1=111
color2=1023,660,0
fcolor2=1023,1023,1023
mcolor2=111
color3=340,1023,0
fcolor3=1023,1023,1023
mcolor3=111
color4=145,1023,0
fcolor4=1023,1023,1023
mcolor4=111
color5=0,1023,0
fcolor5=1023,1023,1023
mcolor5=010
color6=0,1023,340
fcolor6=1023,1023,1023
mcolor6=111
color7=0,1023,635
fcolor7=1023,1023,1023
mcolor7=111
color8=0,1023,1023
fcolor8=1023,1023,1023
mcolor8=110
color9=0,0,1023
fcolor9=1023,1023,1023
mcolor9=100
color10=115,0,1023
fcolor10=1023,1023,1023
mcolor10=111
color11=355,0,1023
fcolor11=1023,1023,1023
mcolor11=111
color12=1023,0,1023
fcolor12=1023,1023,1023
mcolor12=101
color13=1023,0,50
fcolor13=1023,1023,1023
mcolor13=111
Please make the max value to be 940 and that the color change is the same but less draw on the pushing the LEDs. Would greatly appreciate the help. Thanks!