SOUNDBOARD INSTALLATIONS
Specializing in string/strip blade setups- Plecter Labs Nano Biscotte, Prizm starts at: $265.00 (includes 2 speakers (if 2 speakers fit in your hilt) and lithium ion battery pack I'll select amongst the best choices for your board and setup, wiring)
- Plecter Labs Crystal Focus, CF LS, NEC Igniter and Spark, DIYino: 295.00 (includes 1 speaker and lithium ion battery pack I'll select amongst the best choices for your board and setup, wiring)
Additional LED accents including bar graphs and PLI's will be extra.
RUSH ORDERS
New rules on rush ordersThere will no longer be rush orders. Constructing one-of-a-kind custom projects in a rush isn't going to work. Intricate builds take time. This is the reason there will be no more rush orders.
CURRENTLY ON THE BENCH
- Brad H. = Romans 2.0 Graflex with custom chassis by JEDI ARMS DEALER from YouTube and the venerable CF-LS by Plecter Labs with custom segmented 'Real Blue' string blade
STATUS: Preparing for video reveal
- Robert C. = Korbanth Graflex with Plecter Labs CF-X and custom pixel blade
STATUS: Wiring nearly complete
- Marc F. = Customized leather-wrapped 'War Sabers' (looks like a Saberforge, but it is made in Russia) with Proffie board and custom pixel blade
STATUS: Assembling on the bench
- Matzyas S. = Obi Wan Kenobi Romans Prop Lightsaber with CF-X
STATUS: Custom chassis being constructed, preparing for install
- Derya T. = Skywalker Legacy Lightsaber with Plecter Labs Prizm V5.1 custom installation with Neopixel Plecter Pixel Blade
STATUS: Custom chassis by JEDI ARMS DEALER from YouTube is being constructed. A multi-part beautiful chassis! All the extras going into this one!
COMPLETED PROJECTS
- John P. = Korbanth MPP custom Plecter Labs CF LS installation and Segmented string blade construction in 7/8 size
STATUS: COMPLETED and SHIPPED
- Bruno F. = Intelliblade by NEC blade construction using three strips in a one inch blade
STATUS: COMPLETED and SHIPPED
- Jason S. = Special Project Lightsaber: Black Mamba custom installation and Neopixel bladeSTATUS: COMPLETED and SHIPPED
- YODA = Special project lightsaber and custom strip bladesSTATUS: Hilt complete. COMPLETED and SHIPPED
- Francis = Lightsaber staff made up of two different lightsabers. Sort of the light side version of Darth Maul's lightsaber staff. Using 2x Plecter Labs Prizm V5.1 with two Plecter Pixel bladesSTATUS: COMPLETED and SHIPPED
- David M. = Saberforge Mantis with Plecter Labs Prizm V5.1 custom installation with custom Plecter Pixel blade
STATUS: COMPLETED and SHIPPED
- David M. = 1 inch diameter Neopixel Plecter Pixel Blade with TCSS connector, and blade plug with TCSS connector for Neopixel
STATUS: COMPLETED and SHIPPED
- Marcus = Roman's Prop Inception with Plecter Labs Prizm V5.1 custom installation and custom Plecter Pixel bladeSTATUS: Project COMPLETED AND SHIPPED
- Alberto = 2 X Ventress lightsabers with custom installation of Plecter Labs Prizm V5.1's and 2X Plecter Pixel bladesSTATUS: COMPLETED and SHIPPED
- Steven M. = Korbanth Graflex 2.1 with Plecter Labs Prizm V5.1 custom installation with custom Plecter Pixel bladeSTATUS: COMPLETED and SHIPPED
- Mathias P. = Ultrasabers Obi Wan custom lightsaber with DIYino and custom segmented blue string bladeSTATUS: Project Cancelled
- Joshua = 2 X Neopixel blades with the new TCSS connector system
STATUS: COMPLETED and SHIPPED
UPCOMING PROJECTS
- Aman = 2X Darth Mauls from Orbital Machining, custom installations of Plecter Labs CFXs and Plecter Pixel blades
STATUS: - Brandon F. = 2X Dueling lightsaber customs with leather wrapped handles, custom installations of Plecter Labs Prizm V5.1's and Plecter Pixel blades
STATUS: The hilts are almost complete. Then onto the electronics installation
- Jason = Qui Flex III Neopixel Advanced Lightsaber
STATUS: Work on Qui Flex III has begun! Multiple shrouds have been cut. Hand filing underway.
- Christopher A. = Parks Graflex conversion to DIYino with custom segmented 'Real Blue' string blade
STATUS: Parts ordered, some assembly has begun
BUILD LOG1. John P. = Korbanth MPP custom Plecter Labs CF LS installation and Segmented string blade construction in 7/8 size
2. Francis = Lightsaber staff made up of two different lightsabers. Sort of the light side version of Darth Maul's lightsaber staff. Using 2x Plecter Labs Prizm V5.1 with two Plecter Pixel blades, 2 speakers per hilt
3. Derya T. = Skywalker Legacy lightsaber with Plecter Labs Prizm V5.1 custom installation and custom Plecter Pixel blade
4. Marcus = Roman's Prop Inception with Plecter Labs Prizm V5.1 custom installation and custom Plecter Pixel blade
5. Mathias P. = Ultrasabers Obi Wan custom lightsaber with DIYino and custom segmented blue string blade6. David M. = Saberforge Mantis with Plecter Labs Prizm V5.1 custom installation with custom Plecter Pixel blade
7. Jason = Obi Wan TPM lightsaber with Plecter Labs Prizm V5.1 custom installation with custom Plecter Pixel blade - Cancelled
8. Cody C. =
9. Steven M. = Korbanth Graflex 2.1 with Plecter Labs Prizm V5.1 custom installation with custom Plecter Pixel blade
10. Ron Chef = MR Graflex conversion to DIYino custom installation and segmented 'Real Blue' or Viridian string blade
11. Alberto = 2 X Ventress lightsabers with custom installation of Plecter Labs Prizm V5.1's and 2X Plecter Pixel blades
12. Joshua = 2 X Neopixel blades with the new TCSS connector system
13. Robert C. = Multiple hilt installations Plecter Labs Prizm V5.1 with custom Plecter Pixel blades
14.
15. Richard V. = Count Dooku lightsaber with Prizm V5.1 and custom Plecter Pixel blade
16. Brad H. = Graflex Plecter Labs Prizm V5.1 conversion with pre-made chassis and a custom Plecter Pixel blade
17. Max K. = Hilt installation Plecter Labs Prizm V5.1 and custom Plecter Pixel blade: order on hold
18. Marc F. = Graflex conversion to Plecter Labs Prizm V5.1 with custom Plecter Pixel blade
19. Marc F. = Darth Vader conversion to Plecter Labs Prizm V5.1 with custom Plecter Pixel blade
20. Christopher A. = Parks Graflex conversion to DIYino with custom segmented 'Real Blue' string blade
21. Brandon F. = 2X Dueling lightsaber customs with leather wrapped handles, custom installations of Plecter Labs Prizm V5.1's and Plecter Pixel blades
SPECIAL CUSTOM PROJECTS
1. Jacen Solo Dark Side Edition (Darth Caedus) Legends lightsaber: A custom built Jacen Solo lightsaber, built to his dark side specs with Plecter Labs CF LS and Enhanced Red Segmented String Blade
2. Exar Kun custom lightsaber with 2X blue blades, 2X Plecter Labs CF LS boards
3. MHS MST-R
4. Temple Guardian lightsaber staff with 2X Crystal Focus LS and Plecter pixel blades
5. MST Design #3
6. Jon Snow 'LongClaw' custom casted aluminum lightsaber with carved wolf head pommel, leather wrap and Plecter Labs Prizm V5.1 and white Plecter Pixel Valyrian Steel blade
7. The 'Sabe Calibur,' a custom lightsaber with special neopixel long strip accent and faux crossguard, grip bar inspired by Vader's Vault
8. Qui Flex III for Jason
9. Gauntlet Power Pack and Plecter Labs Blaster Core 4.0 with Screen Wrist Launcher and Lightsaber Plecter Pixel Corded Attachement
PERSONAL PROJECTS
1. Graflex deconstruction/reconstruction project inspired by Slothfurnace's work including 'Derelect,' using a real graflex body given to me by Revan Reborn on these forums
COLLABORATIVE PROJECTS FOR 2018, 2019 and BEYOND
1. Qui Gon 'Prismatic' Lightsaber with Qui-Gon shroud and laser cut scalloped acrylic inserts in which will be built cutouts for the electronics. Various LEDs in the hilt will light up the multicolored acrylic scalloped grip pieces which are connected with TCSS chassis rods to the emitter and pommel. The Qui Gon style shroud can be made of TCSS shroud material or other aluminum piping. I'm open to collaborators on this one! I'd be great at doing the metal working on this one, but the acrylic laser cutting I'm lost on. Configuring for the cutouts to hold the CF or whatever board... I"m lost on. Other than I know we need wire channels, and spaces cutout in cylinders for the batteries.
2. Custom Multi-Shroud uniquely designed group of six lightsabers which will be powered by Plecter Labs soundboards and run my Plecter Pixel blades with TCSS connectors. This project will commence between myself and Harris (co-host on SaberTalk) in late 2018 and run through 2019
Custom Hilt Design Concepts
The above picture is an approximation of what I'm doing to make the Dark Jacen Solo lightsaber come to life. When finished, this hilt will feature MST (Multi-Shroud Technology), the Plecter Labs Crystal Focus LS 6.5 and one of my brightest red blades. Similar to this:(video link)