fiduciary

Author Topic: Need a mouser part # for a repair **Solved**  (Read 1327 times)

0 Members and 1 Guest are viewing this topic.

Offline GreaSyde

  • Force User
  • ***
  • Posts: 238
  • I always wear a lightsaber.
    • ACMEsabers
Need a mouser part # for a repair **Solved**
« on: July 01, 2018, 07:26:59 AM »
LORA voltage regulator on a Prizm 5.1

« Last Edit: July 13, 2018, 05:20:48 AM by GreaSyde »
Only two there shall be. A master and an apprentice. One to embody the power and the other to crave it.

Offline SOSDD

  • Force User
  • ***
  • Posts: 245
Re: Need a mouser part # for a repair **Solved**
« Reply #1 on: July 01, 2018, 08:15:46 AM »
Personally, I would just grab one from a power extender

Offline GreaSyde

  • Force User
  • ***
  • Posts: 238
  • I always wear a lightsaber.
    • ACMEsabers
Re: Need a mouser part # for a repair **Solved**
« Reply #2 on: July 01, 2018, 10:20:13 AM »
Personally, I would just grab one from a power extender

Not a transistor like on the PeX, Michael. It's a voltage regulator.

Like this one on the CF9
Only two there shall be. A master and an apprentice. One to embody the power and the other to crave it.

Offline GreaSyde

  • Force User
  • ***
  • Posts: 238
  • I always wear a lightsaber.
    • ACMEsabers
Re: Need a mouser part # for a repair **Solved**
« Reply #3 on: July 10, 2018, 09:38:00 AM »
Anybody?
Only two there shall be. A master and an apprentice. One to embody the power and the other to crave it.

Offline CHEWBACCA

  • JEDI/ALLIANCE Master MODERATOR
  • Master Force User
  • **
  • Posts: 2051
  • Formerly known as MH
Re: Need a mouser part # for a repair **Solved**
« Reply #4 on: July 10, 2018, 11:58:51 AM »
I am not on the forums much because of time and only saw this because someone sent me a link.  It is better if you email, PM or message me through facebook.  I know you have all that info so I could have gotten it to you much sooner if you had come to me.

LP2985AIM5-3.3/NOPB


EDIT...I didnt mean to sound like a jerk (I just re-read it), just that if you have a question about a PL board for a part number it is best to reach out to me or erv directly instead of posting it on the forum etc.

« Last Edit: July 10, 2018, 01:58:08 PM by CHEWBACCA »


Offline GreaSyde

  • Force User
  • ***
  • Posts: 238
  • I always wear a lightsaber.
    • ACMEsabers
Re: Need a mouser part # for a repair **Solved**
« Reply #5 on: July 11, 2018, 08:21:18 AM »
Sorry Michael, I wasn't aware that you aren't as active here. I'll just message you directly through FB in the future.

Thanks for the info.
Only two there shall be. A master and an apprentice. One to embody the power and the other to crave it.

 

retrousse