About 3 years ago I bought a Graflex lightsaber and started building a few brass chassis for it. The sounboard was a Prizm 4. Due to different reasons the project was never finished. Now I have some more time and finally want to complete this build. Back then I made a drawing (picture below) based on the manual and some internet pictures. After connecting it for a test most things (kill key, sounds, switches, tri cree LED, on/off LED, accent LED's) work but there are 2 problems :
-- The tri cree has 2 blue and 1 white LED. I assumed the white LED should work on a clash or when the button is pushed but it never works. The white LED was tested seperately and works fine...
-- Only 2 of the 4 accent LED's work. All are installed correctly and tested individually again and are OK...
Am I doing anything wrong ? Thanks for your help.
Some pics and a short video :