just wondering on these what would be the best way to achieve that high glossy polished look like on the mr le?
would a polishing service be considerd?
Darth Xusia sent his deposit and has been added to the list ;)
Posted this run on the FB Saberholics page and will do so on the Lightsaber FB page.
Is there a minimum this run needs to hit?
Oh believe me. I want this epicness. I just have extreme lack of funds at the moment. :'(
Guess I may as well make this my first big buy. :)
Deposit sent. Amber FOC
As a side note. As I haven't participated in a build like this before. Once the minimum (if there is one) is met, how long does it take for completion? More curiosity than anything. :D
a bbrg could give a nice amberish foc using the r and g
a bbrg could give a nice amberish foc using the r and g
a bbrg could give a nice amberish foc using the r and g
But a quad won't fit and isn't being offered anyway. You would still have the akward looking "color change" rather than "on top" FoC.
So yeah, my preference with blue is always white FoC. With green or red i like yellow FoC because you can use the opposite die (red or green) to produce a nice yellow flash.
@ ANAKIN SKYWALKER
Thanks man for the info thats awesome much appreciated! Sorry if this is dumb question but by choosing a white FoC for this saber, would it be a pure white color FoC or a purplish white FoC?
Hi all, new to the forum here. I signed up when I saw this beauty. I'm very interested in getting in on this run but have a couple questions first. Sorry if they are silly but I am not all that familiar with what the 'norm' is for runs like this. Seeing as how this will utilize real copper and brass, will there be a protective coating on those parts to prevent tarnishing? Also will the black anodized parts have a glossy finish like the MR LE or will they be flat black? Thanks!
Also wondering - are the shiny renders the final version or are the non-shiny ones final? I ask because there is a slight difference where the brass stem meets the grenade top. The shiny renders appear more accurate to the MR LE in that there is no brass circle on top of the grenade, just the stem itself. Thanks!
Thanks also to Anakin for your reply. I look forward to your tutorial!
Just curious on time frame, any idea when this project will kick off? Are you waiting for all 20 spots to fill first? Thanks!
beautiful, is it possible to get an empty?
had another read through and didnt see it but thank you for the no ;) shame as this need a cfls ;)beautiful, is it possible to get an empty?
Pretty sure that was answered previously and it is a no. Unless you buy it for the full price and want it empty. ;D
That's because it was posted in the interest topic:had another read through and didnt see it but thank you for the no ;) shame as this need a cfls ;)beautiful, is it possible to get an empty?
Pretty sure that was answered previously and it is a no. Unless you buy it for the full price and want it empty. ;D
I posted this in the split off topic but decided to post it here as well. Please drop the LS from discussion in this thread...it is just not an option for this run and is not up for discussion at this point.It wasn't directly answered directly, but the fact that there are no options available other than the FoC color, says no there are no empties available, they will all come with CF7.5's and if you don't want it, you remove it and sell it off.LOL at how this escalated. Here is the thing...I have nothing against LS and it has its place just as the regular LED does. Both are great technologies and everyone has their preferences. There is nothing at all wrong with that. I like both though I do not personally have any LS sabers anymore.
The problem is we did not design the hilt for LS and we are keeping things as simple as possible to make it more affordable and easier for installs as well. The only option this run will have will be the color of the FoC you want...no CS, no PC...just CF 7.5 and a tri-LED.
While I completely understand people wanting an LS it is just not an option for the said run. I am really sorry that I cant accommodate everyone with this run as much as I would like to...I just cant. If you want to get it, sell the CF7.5 and LED and put a LS in then that is your prerogative and you will probably come out about the same in the end had I offered it but it will not be an option from me. I do not want to dissuade people from buying on the run but I am just not offering them in an LS format.
on the brightness side of things will the led be in the emitter or behind the neck section?
When designing the saber with the machinist we had some options. We could have larger blade depth or a brighter blade. I want to keep this 100% accurate but I also wanted brightness. I decided to put the LED in the emitter and lose some blade depth because the hole for the neck on this saber is really small and I felt it would be dim especially with a tri LED. We also decided to keep the blade holder at the correct length for accuracy so it reduces depth there. The blade depth is roughly the same as the MKIII so it shouldn't be an issue at all but with the LED being right under the blade it will be plenty bright.
Mind updating my listing to White FOC? Thanks guys. :DDone
i would love to get on these run!!!!!! these like amazing!!There are still spots available. Follow the instructions in the first post to get on the run. Thanks
whats up saber guys, this is something ive been looking for.. i just have a coupke questions..
Will the electronics be removeable? or glued in? installed, not glued in.
Is there more pictures? Nope.
Has production started? ect. yes.
sorry for the questions, im just a 17 year old kid and 1300 is a lot of money (:
thanks.
Deposit sent on 7/8
White FOC
Booyah!
Deposit sent on 7/8
White FOC
Booyah!
I would love a confirmation and to be officially added to the list ???. Also curious as to any updates.
Deposit paid! White FOC please! Thanks, super excited to be in on this run.
Go ahead and make mine white FoC, Chewy.
Looks Like One Spot Left, who will be # 20?
Deposit sent (white FOC) thanks (:
Congrats! Darth Dimitri
any updates?
I am posting a list of people that have contacted me with the intent of being on a wait list in case a spot opens up. If you emailed me or LDM and I have not put you down please contact me.Please add me for one of the spare spots if they come up.
1. cloudy
2. msasin
3. Hooligan409
I hope to have more updates coming on this soon but one small update is there will be 5 new spots of which I am giving these three first shot at. Once I hear from them I will open up the spots that we have left for anyone else to purchase.
I am posting a list of people that have contacted me with the intent of being on a wait list in case a spot opens up. If you emailed me or LDM and I have not put you down please contact me.Please add me for one of the spare spots if they come up.
1. cloudy
2. msasin
3. Hooligan409
I hope to have more updates coming on this soon but one small update is there will be 5 new spots of which I am giving these three first shot at. Once I hear from them I will open up the spots that we have left for anyone else to purchase.
The 12 dimples on the emitter look a touch too small, are those going to be enlarged for the final version?
MR version below:
http://www.rebelscum.com/photo.asp?image=/mr/mr-e3-obiwan-le-16.jpg (http://www.rebelscum.com/photo.asp?image=/mr/mr-e3-obiwan-le-16.jpg)
Ok, thanks for the info. Are there any other differences between this version and the MR it was based on? I thought it was going to be 100% accurate to the MR, just want to be sure I'm not confused.
Thanks
The Smaller Holes do not bother me at all, I would have smaller ones any way if it means that the Emitter can use the normal size blades.
May I ask when the next installment would be Due?
Thanks for the info Chewbacca, I really appreciate your taking my question into consideration. I'm not sure I would be disappointed as I understand now why the slight change was made, but to me it would look better by having the dimples larger, closer to the MR size. Even if they're not 100% to the MR they should be a little bigger. When I look at the pic of the machined emitter next to the MR version on my screen to me there's enough of a difference to say it's not quite close enough. Please don't take that as anything against you or the machinist, it's just my take on it. You have to understand I am extremely picky when it comes to things like this. It's one of those things that would bug me but might not phase other people.
Thanks Chewbacca,
Ether way you go with the Holes, I would be happy with.
If you go bigger I would be for it as well.
Should we do a vote?
Hi there,
Just need a little confirmation. I'm in on this run now, right Chewbecca? :)
Thanks
How durable are the thin necks on this piece? No plans for hard dueling, just making sure its not similar to a company that will not be named thin necks.
White FoC please.
just wondering while were on the subject how long until next payment?
Glad to see that at least the Obi ROTS run is showing progress. Hopefully it is a sign that other runs will go forward soon too.
I believe the run is full at the moment. Unless you have discussed this with MH or LDM about sending deposit. :)Yes I've discussed this with chewbacca.
I should also ask, will any 7.4V Li-ion charger work with this? I've never had a CF saber before so I don't want to destroy it before I even get to turn it on. Thanks.
Update time...
I got the boxes from the machinist last weekend. I will go through them sometime next week and get them ready to send to the anodizer.
Hi,
Sorry did not get notified 2nd payment is Due, Will send as soon as I can,
When is the Cutoff for payment, as I need to wait till end of next week.
Bummer hope my spot is still security.
Nice update!
Can't wait to see one of the all finished
Chewy can you post a pic once you get them anodised just as an appetiser
Oh and here is a back shot of the box showing the details of it
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FOBIROTS%2Fobi9.jpg&hash=ef599f6bae00fc9885cc679c48671c212c1de019) (http://mandysbabies.com/OBIROTS/obi9.jpg)
Thanks for the update. Are you thinking another couple months then?
I just want to thank Chewie and the General again for all their hard work on this saber. It already looks beautiful and I have no doubt will be awesome when all's said and done. So thank you Chewbacca and Grievous!
I'll be honest, I'm kind of glad it'll be quite a while before everything's finished up. I want to make sure I have the funds on hand to pay at a moment's notice. :jediblue:
I think after this Thers only the mace windu saber needing justice done to it
Got it :)
FH is correct. I do have a lead on a couple of anodizing places but nothing has materialized. For those frustrated with how long its taking please know I share the frustration. I want these done and out of my hair as much as you guys want them in your possession. I am doing the best I can with the time and contacts I have. Unfortunately anodizing is NOT something I want to take on myself (even if I had time). Yes they should be ready in 2017...after anodizing its just a matter of doing the installs so we are getting there.
If anyone has an anodizer they trust feel free to PM me.
AT...no that is not an option. I have yet to find chrome anodizing that is even remotely shiny enough to be a consideration. I am going to leave it aluminum and allow people to polish them as they see fit.
There has got to be someone who knows a reliable shop that could do the anodizing as it's a fairly routine process. Not to sound silly, but have you asked around to the other saber smiths? I'm not sure where you're located but are you looking for something local to you?
The original post states that a pommel insert vented for sound will be used rather than a static insert. I want to confirm that the sound holes are in fact an insert and not part of the actual pommel. Could one, theoretically, interchange the inserts and use a solid one for display and a vented one for play?
The original post states that a pommel insert vented for sound will be used rather than a static insert. I want to confirm that the sound holes are in fact an insert and not part of the actual pommel. Could one, theoretically, interchange the inserts and use a solid one for display and a vented one for play?
They are indeed an insert. They are MHS compatible so you can swap it to whatever you like.
I've sold my spot to dr.djcolegrove.
I totally agree with you on this.Have a few experiences of my own dealing with anodizing store.There has got to be someone who knows a reliable shop that could do the anodizing as it's a fairly routine process. Not to sound silly, but have you asked around to the other saber smiths? I'm not sure where you're located but are you looking for something local to you?
The problem with Anodizers is they charge for the racking and by the bath. They'll count a small thing like this as a whole bath, and then set it aside until they get other small orders to also charge for a whole bath, when they really only have to dip 1 time for multiple orders to be filled. It's easier for them to make money by doing their "regular" stuff, so these jobs always get pushed back. Not to mention, the black is supposed to be gloss, which isn't something every place offers. You're lucky to get black at all, rather than some dark purple (the color of black sharpie ink) awfulness. So yeah, finding an anodizer willing to do a small job, able to do the right color and thickness, and willing to individually wrap the parts back up (most of them just want stuff they can throw in boxes and be done with it) is difficult and time consuming. Shipping things halfway across the country is difficult because you can't inspect the process and make sure they aren't just tossing the parts around before and after the bath.
Does tcss do anodising?No, they do not. :sad:
Ant chance these will have the CF9 if the timing works out?
...Each saber will have the latest CF version available when the saber installs begin...
Personally I would be happy to wait for the cfv9
Ant chance these will have the CF9 if the timing works out?
Quote from original thread :wink:...Each saber will have the latest CF version available when the saber installs begin...
New update though not much. The chassis is designed and will work great. I will be placing the order for the rest of them. They will be going to the anodizer to get the rest of them done in the next few weeks as well.
Michael
Sorry, I missed this, I am not able to be on the forums much lately. LDM is correct. They are being anodized and the chassis is being produced. I am hoping that installs will start by June for me at least (I do not know Marc's schedule). Once I get the chassis in hand and the parts back from anodizing I will take pics and update everyone...its getting close though.
Oh wow, I almost forgot about this.
Lately, LDM & MH don't seem to log onto this forum as much, unfortunately.
Any speculations guys? Maybe 2020?
Oh wow, I almost forgot about this.
Lately, LDM & MH don't seem to log onto this forum as much, unfortunately.
Any speculations guys? Maybe 2020?
Let’s knock off the speculation. I’m sure one of them will pop in soon to give an update.
I am curious too, I can't remember what i paid in total my self, its been a while.
FYI, we have not "forgotten about" this run. It is an Orbital Machining run and Orbital was so backed up that it took longer than any of us foresaw. My goal, as soon as I get the builds i am responsible for into my hands is to knock them out within 6 weeks of that day. I realize that is ambiguous, but it is what I know right now.
FYI, we have not "forgotten about" this run. It is an Orbital Machining run and Orbital was so backed up that it took longer than any of us foresaw. My goal, as soon as I get the builds i am responsible for into my hands is to knock them out within 6 weeks of that day. I realize that is ambiguous, but it is what I know right now.
The official LDM/MH GK3 run thread *2nd payment now due* (https://www.fx-sabers.com/forum/index.php?topic=45582.msg637820#msg637820) from April 16, 2016
Hey there,
who should I talk to about being able to sell my spot on the run?
I will post a pic of the sample from the last batch and the chassis when I get a chance in the next day or so.
If anyone is interested I would be open to selling my spot.spot purchased... Darth Brooks
Kanjiklub
Just wondering what electronics will be in these?
Tech has moved on a lot since 2015 in leds and sound boards,
And yes alike the last poster asked any news on these?
Great to hear an update. Didn’t see my name updated on the list. I bought a spot from another forum member a while back. Just want to make sure it didn’t fall between the cracks.
Hi. I purchased a Sidious saber from the LDM website in May and I still haven't received it. I've sent an email and also a message via the contact form on the website but haven't had replies to either. Could someone here please let me know what's happened to my order? Thanks.
Now that we are getting closer to the year's end and the CFX has been out for awhile, are there any updates on the run's progress? Thanks!
Yes yes yes! So happy to hear it, and I'm glad you've taken your time to find the right people for the job. Honestly I'm kind of happy it's taken the time it has. 5 years ago a pixel blade wasn't really even a thing, and now we may get it on this hilt with a CFX! Woohoo!🍻🍻🍻
For what it's worth, I would absolutely take a pixel blade configuration if it's available. :jediblue:
I'm open to sell my spot if anyone wants to jump on?
Just what has been paid so far... just PM me
Yup! Home stretch... ready to sell. Whoever buys will even get this AWESOME plaque!😉2x5.5"
(https://i.postimg.cc/NjXFLPrz/20200205-162354.jpg)
(https://postimages.org/)
Cool! I'm glad everyone likes the update. Believe me, I am very anxious to get these babies finished!
Cool! I'm glad everyone likes the update. Believe me, I am very anxious to get these babies finished!
Any more Updates?
Agreed. Barring substantial proof to the contrary I think we've reached the point where we accept that the run can't be delivered as promised and work out what can be reasonably done to deliver what there is to be delivered.
I'm not even mad, even if all this run produces is the un-anodized empties there's at least a path to getting something I'm willing to accept.
It's simply past time to accept the realities and move on.
Any update on the anodising? Or any update at all ? Been quiet for months also any word on sending out the hilts as they are? I’d take mine and get it finished elsewhere
I will upload the pics when I get back.
CFX only.
I will upload the pics when I get back.
CFX only.
Must be a long drive home...
The year is 2021.
This plan was started in 2015.
I am worried that maybe this plan will be aborted.
If they are being offered, I'll take the pixel as well Pls n thx.
Superb news just to be clear how much more for the pixel blade?
Superb news just to be clear how much more for the pixel blade?
Am I the first group?
An absolutely epic update! :angel:
Plz put me down for Pixel!
Superb news just to be clear how much more for the pixel blade?
I want to make sure I answer the correct question. Are you asking how much to get the plecterpixel install, or how much for an actual blade?
Finally, for those who are getting non-pixel sabers, we are also automatically upgrading you to RGB Tri-cree instead of BBW (that is so 2016 after all)so that you can dial in the exact blue that you want and the FoC color that you want.
Finally, for those who are getting non-pixel sabers, we are also automatically upgrading you to RGB Tri-cree instead of BBW (that is so 2016 after all)so that you can dial in the exact blue that you want and the FoC color that you want.
If we so choose, can we elect to be "so 2016", and stick with BBW?
Huge update:I was under the assumption that the hilts were already sent out to the installers sometime back in April.
So these are back from the anodizer. MH will be sending the hilts out to the installers next week.
I am not certain if anyone knows about the global component shortage? Unfortunately I am now waiting on boards.Was this a known problem back in March/April 2021?
I have ALL other components in my hands and ready to send to installers as soon as MH sends the hilts and the boards. Of course, no need for him to ship anything until we have the freaking boards.
It’s been a few months since they have been sent to installers. Any word on when we might get invoices or expect to get these? I really hope we are in the home stretch now…
Huge update:
So these are back from the anodizer. MH will be sending the hilts out to the installers next week. All 4 installers are MC or Guild members here at Fx and are known commodities. We will handle the installs as follows:
The people who have been active in this thread since the beginning of 2020 will be finished first. That is 16 people. 4 installs per installer and the installers have been randomly assigned. Timeframe? We are shooting for 2 months from the time that the installers receive the hilts. We are still waiting on a custom part for the pixel installs, so those could go a little longer, but with how long this has taken, we are definitely in the home stretch. For those who are getting pixel installs, they do NOT include a 7/8" pizel blade. I am willing to look into procuring them for those who need them, but they will cost extra.
Once this group is finished, MH and I will try to get ahold of the people who have not logged in here in a long time.
Changes/notes:
Most may not remember what the amount of the final payment for this run is. It is $600. In light of what has gone on, MH and I have crunched the numbers and are able to lower that to $400 and end up square. In other words, all profit is now gone from the run. We will call for the final deposits once the hilts have been finished by the installers. I will collect the final deposits at the same payapl address that the other payments went to (I'll provide it at the time).
Finally, for those who are getting non-pixel sabers, we are also automatically upgrading you to RGB Tri-cree instead of BBW (that is so 2016 after all)so that you can dial in the exact blue that you want and the FoC color that you want.
I think that covers it for now. :angel:
This is amazing news. Thank you. Very much.
Question for those out there, any recommendations on a pixel blade plug? Not needing a blade right now, but for display I'd like to still be able to show it off.
This is amazing news. Thank you. Very much.
Question for those out there, any recommendations on a pixel blade plug? Not needing a blade right now, but for display I'd like to still be able to show it off.
This is amazing news. Thank you. Very much.
Question for those out there, any recommendations on a pixel blade plug? Not needing a blade right now, but for display I'd like to still be able to show it off.
Not sure on that. Just make sure it is a 7/8th. The saber comes with an accurate blade plug but it will not light up.
I haven't been keeping up with the lightsaber game in a few years and I don't really even know what the difference is with the Pixel Boards/Blades...Are all the sabers coming with Pixel Boards or was it just those that spoke up earlier? If they are all going to be Pixel then I will need a blade please! I am really excited to get this saber in my collection!
***BIG UPDATE***
https://www.dropbox.com/s/vf0p1btjyy881fa/100_0090.JPG?dl=0 (https://www.dropbox.com/s/vf0p1btjyy881fa/100_0090.JPG?dl=0)
I have received the empty hilts and have already sent them to the installers (within 3 days). MH has already begun his installs and I will begin mine this week. The ones shipped to the other 2 (well known) installers should arrive this week and then those installs can begin as well.
For those who requested the pixel upgrade, I had to machine the emitters (internally) to accept the PCB holder since they were originally designed for a Tri-Cree. I did this for everyone at no extra charge.
The "wobbly" emitter issue that MH noticed has been resolved. I have tested one with a 7/8" pixel blade in it and swung/smacked it and nothing appears amiss now. Once again, the mod was done at no charge (on ALL hilts).
The first phase of installs are for those who have been active in this thread since 2020. The second phase will be for the rest. Final payment (the final installment) will be due upon completion of your saber. All will be paid to ME (as I have been the holder of the coin for this project) and I will pay the installers.
First group is:
MH ; All finished, MH invoicing & shipping
1. Manny (off site)
2. Aginor
3. Fonzie
4. Modern-Day Warrior
5. joker (was Darth Dimitri)
Obi-Dar ; All finished. All invoiced, still waiting on 1 to pay).
6. Mace Windu (Nightstorm)
7. coldvizjerei
8. Darth Imperium
9. Lazi-D
Jango ; All finished. Will invoice all 3 right after this.
10. msasin
11. NinjaPirateAssassin
12. ctech88
LDM - All shipped, all paid
13. ZeroSpeed
14. Dark Lord of Sushi (was Watto)
15. 2fishbones
16. Baum
The second group (These have all been contacted and builds are moving forward for them):
17. GusManB = MH
18. Anakin Skywalker = MH
19. cavjo = MH
20. Prestonian7 = LDM
21. Darth Maul = LDM
Finally, for those who NEED a 7/8" Pixel blade (or regular 7/8" blade), it will be a separate transaction. You can PM me if you want one. They are $109 for pixel and $32 for Gelu with bullet tip + shipping. You are NOT REQUIRED to purchase a blade. I am making them available as a service for those who need them.
Nice to see this long standing run nearing completion. Can't say that for others on here.
Nice to see this long standing run nearing completion. Can't say that for others on here.
Ugh, I didn't realize there were any other runs that were still going on here. Hopefully whoever it is will get things finished and out as soon as possible. This run (GK3) has been rough for everyone, which is why we cut down the price and just wore it. I'm just glad to get them all finished and out (which should be 100% complete within the next 4-6 weeks, as over half are out already! Thank God!).
Anyone waiting on another run I wish you well on it and hope it gets resolved. If it is here at Fx, the person running it should be trustworthy or at least sponsored by someone trustworthy) that won't ditch you. Hopefully that is a little comfort at least.
Is it? The original post states 7.4v. Did that change with the pixel upgrade?
Also got my blade from MD today. Popped it in and it turned on; clashes, blaster, ignition, retraction, color change, etc. were all functional. No sound though.
Is it? The original post states 7.4v. Did that change with the pixel upgrade?
Also got my blade from MD today. Popped it in and it turned on; clashes, blaster, ignition, retraction, color change, etc. were all functional. No sound though.
Yes, Neopixel only really runs week with a 15A 3.7V battery, as far as I know, there is no 7.4 V setup that would currently fit within a saber to do Neopixel. LDM should confirm.