FX-Sabers.com
FX-Sabers Discussion - Including a Gallery of custom sabers. => Forum Gallery => Topic started by: Sawyer on November 09, 2018, 02:29:17 PM
-
Hello there! Haven't posted a saber in awhile- thought i would share one i made over the summer. Pardon my dust- as it *is* a little banged up from use. :)
Was looking around at some other saber smiths and their work- and i always wanted to *attempt* to make a bone hilt. (a la Madcow style) This is about as close as i could get. It's supposed to be a Jedi archivist's weapon- so i initially wanted to do a really complex etching for it- but i didn't have the time to do that this time around- so i opted for a more simplistic approach.
The Specs:
-Tri cree, royal blue
-Nano V4
-12mm vandal momentary
-In hilt recharge
-Mixed MHS v1 and v2 parts
-22mm stealth speaker (not bad for a little guy! still not quite as good as a bass 28 though)
-Custom chassis
-Hand-cut claw piece/peg mount
-Dremel cut shroud with custom acid etching
-PVC "bone" handle, hand sanded
-Lightly weathered from my little brother attempting to turn to the dark side with it
And now, the glams:
(https://i.imgur.com/8u2TlJl.jpg)
(https://i.imgur.com/X9kkxP9.jpg)
(https://i.imgur.com/rqm1ExK.jpg)
(https://i.imgur.com/v8xcPMH.jpg)
(https://i.imgur.com/5cJ91nW.jpg)
Thanks for taking a look. Cheers!
-
Really loving this design. Great work on this. This flows really nicely from the tech features to the bone handle. And the Graflex touches are nice,
-
This is such an amazing design! I love the intricate details along the middle section. Great work!
-
Your shroud-work is inspiring. You really push the limits of what an acid-etch can accomplish. We shall see how I fare when I try acid etching myself.
-
Absolutely amazing. Love this design. Excellent work!
-Denzil
-
Cool etching on the shroud