CFX blade issue SOLVED

[Darkmatter73]

So as soon as I slide the kill switch, before I even touch a button, the blade lights up white. I’m running the default config except ledstrip=27 for a short test blade.

Ignition and any button functions sound normal, but the blade does nothing except stay lit all the time.
The pixel connector is tested and working on a proffie setup.
Resistance is reading correctly at 330 ohm.
Reading 4.1V with multimeter.
Pretty sure nothing is bridged, I just rewired it this morning to be sure.

Am I missing some config value? I haven’t made any changes except the led strip one above.

Thanks for any input
Darkmatter73

[erv]

wrong timings not matching the firmware

[Darkmatter73]

That makes sense.
How can I fix this?
edit: they are SK6812

[Darkmatter73]

Hopefully I'm reading the manual right.
So I'm changing ls1
from: 350,700,24,1,3
to:   52, 104, 24, 1,3

So 52,104,24 for timings, 1 for GRB order (SK6812) and 3 for RBG only without the white.

Does that sound correct?

[erv]

350,700,24,1,3
are what to use since fw 10.002 (I suggest you update your fw if not done already)

[Darkmatter73]

Ok updated firmware and all is working well.
Main blade lights properly, and CC lights properly after I changed the byte order.
Blade mirror working as intended.
Thanks Erv, marking as solved.

Darkmatter73

[erv]

Awesome thanks