FX-Sabers.com
The S.A.B.E.R. GUILD: Saber Manufacturers => Sith Planet => Topic started by: Millicente on November 16, 2017, 07:20:49 AM
-
Wondering what it is. I imagine this saber wouldn’t be good for dueling due to blade depth or thin neck or both.
-
I would assume it’s similar to the K4. The blade depth is shallow but it holds the blade tight and I’ve done light dueling with mine. Wouldn’t smack it against a tree but I don’t generally do that anyway. Hope this helps
-
I’m hoping it’s a little deeper. I also wonder how hard a neopixel Install would be. I don’t know if you could place the plug in the emitter and still have enough depth
-
I’m hoping it’s a little deeper. I also wonder how hard a neopixel Install would be. I don’t know if you could place the plug in the emitter and still have enough depth
Here's your ticket for the thin neck blade no matter what Neopixel capable board you'd like to use! It's what's going in mine :cheesy:
http://www.saberigniter.com/IntelliBlade.aspx (http://www.saberigniter.com/IntelliBlade.aspx)
-
Thank you!!
-
Dmitry Shtok also posted wip on a low profile pixel connector fiy.
-
The LS6 emitter will be 1/2 inch deeper than the K4 Emitter - so good news
-
The LS6 emitter will be 1/2 inch deeper than the K4 Emitter - so good news
That's great news!