FX-Sabers.com
The S.A.B.E.R. GUILD: Saber Manufacturers => Plecter Labs => Sound boards technical issues / questions / problems => Topic started by: mikestar007 on September 15, 2018, 01:05:26 PM
-
Hi everyone,
So I finished a simple NBv4 build. Working perfect on the default settings. But when I turned FLKS to 0 , I get a very delayed light after the ignition sound, probably like 3-4 sec late. I want all the flicker off static blade .
My setup:
BBB tricree (2 blues on channel 1, 1 blue on channel 2 ) all blues on for the main blade
18650 3.7V 12.95Wh 3500 mAh battery.
-
Switched qon to 1 and now it’s matching up. Was it delayed because of the current draw ?
-
Leave flicker speed at 2 or 3 to keep the engine compute normally. Turn flicker depth to zero to remove it
-
Ah thank you