fiduciary

Author Topic: DM1 (Darth Maul Korbanth) 3D Printed kill key for Silver button  (Read 535 times)

0 Members and 1 Guest are viewing this topic.

Offline Wolf69

  • Padawan Learner
  • **
  • Posts: 78
  • Um...Hello?
DM1 (Darth Maul Korbanth) 3D Printed kill key for Silver button
« on: September 07, 2017, 10:23:26 AM »
Hey Guys,

I have design a kill keyfor the DM1 (Darth Maul Korbanth) 3D Printed kill key for the Silver button.

Instructions:
You will have to drill and tap the hilt first for the recharge port. Then sand the bottom of the silver button in order for it to sit flush on the recharge port since you 'll have a nut securing it in the hilt, that way it will be at the same high as the red button.












Warning Depending of the version you have V1 (2016 and before) or the 2017 you will have to choose a different kill key!
The noticeable difference is the inner, if the ID is reduced to 7/8" on one paret, you have a V1.

Everything is my shapeways shop:
Wolf69 Creations by wolf69 - Shapeways Shops

Hope it will help some of you in your build!
« Last Edit: September 07, 2017, 11:01:11 AM by Wolf69 »

Offline Darth Jal

  • No Force
  • *
  • Posts: 23
  • Um...Hello?
Re: DM1 (Darth Maul Korbanth) 3D Printed kill key for Silver button
« Reply #1 on: January 13, 2018, 10:55:23 AM »
I am interested in getting 2 of these. Let me know where to send pp.

Offline Wolf69

  • Padawan Learner
  • **
  • Posts: 78
  • Um...Hello?
Re: DM1 (Darth Maul Korbanth) 3D Printed kill key for Silver button
« Reply #2 on: January 13, 2018, 12:02:26 PM »