Hey Andydabeast
Post some good pics of the inside of your saber / the wiring and someone may be able to help you out. I don’t personally own a Yoda Force FX but through the process of elimination we may get it.
Also, in the future your better off posting once and waiting. If you posted in the wrong section in will be moved - no need to blitz the forum with multiple posts asking the same question. Have patience my friend.
- Steve
Thanks steve. Sorry I was just kinda frustrated with how hard it is to find info. Last night while trying to figure things out the black wire going into the battery pack broke at the base. It is safe to assume that my pack is pretty much dead and im considering 3d printing a new one.
So now I need to take the battery pack apart. It seems glued. Best case I can reassemble it after I get new wires in there and worst case I salvage the speaker, connector holes to the saber, and battery terminals and make my own. Any tips for taking it apart?
But besides that there is still the wiring. I presume the yellow wire going down is for one side of the batteries. I know the brown and black wires are for the speaker. Are batteries in series?
So the components:
three aaa batteries
speaker with brown and black
end with three terminals that go to saber. Two of these are speaker, the other is red
The resistor
I know there is a loop with batteries and resistor, but which side of the resistor the red wire connects I do not know.