fiduciary

Author Topic: CFX blade won’t turn off issue.  (Read 348 times)

0 Members and 1 Guest are viewing this topic.

Offline Jediseth

  • Force User
  • ***
  • Posts: 189
  • Jediseth sound fonts available at saberfont.com
CFX blade won’t turn off issue.
« on: February 02, 2021, 12:46:44 PM »
 I have a Tri-Cree LED with a CFX. I’ve wired many of these very similar and haven’t had this issue before, but I do usually use the higher milliamp battery.   When I power on the saber everything works fine. All the switches seem to be functioning properly, but when I hit the power off it turns off the sound, but both my blade and crystal stay lit. It isn’t until I put the kill key in will it turn off.  I’m wondering what could be wrong, is it a battery issue? I have one 3mm LED running off power and the Crystal LED running off it’s pads. It’s probably only a 2600 mah and I’m wondering do I need more milliamps?
Thanks!

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: CFX blade won’t turn off issue.
« Reply #1 on: February 02, 2021, 10:31:32 PM »
is that the default package ? log the saber to look for errors. Your soundfont might be incomplete

 

retrousse