Just a quick demo. Never made a 3-section lightsaber staff, but it was cool to try something new.
Not a replica, of course, but another "interpretation".
There's two hilts, 8" each, one side has the NB V4 (NeoPixel strips, 167 per side, 334 total), 21700 Li-Ion cell, AV switch, and recharge port. In order to start the scroll at the tip, I had to run copper foil tape between the strips to carry signal/current. I also had to do that for the center blade section since the second grip has the speaker. It separates at one of the center points and there's a din plug for a quick breakdown for shipping/travel.
The hilts are 1.125" aluminium tube, the end blades are 7/8", and the center blade is 1" thick-wall - so they all appear to be the same width. In the game, Jade's staff make a very metallic sound, kind of like a pitched-up Mjolnir... so I modified my Thor font to be higher in pitch.
I'll post more later when I finish the full talkie video, with better/more pictures.