General, refresh my memory on the US 2.0- that's the version that has a Jedi-ish font and plays well with 7.4v correct? And does not require the transistor for the switch?
Good mornng.....
I sent you a message a few days ago regarding a soundboard with a couple of questions. I never got a reply from you. Perhaps the message got lost somehow, or is buried in your inbox.
I still need the soundboard if what you have is the same as what I need. I was unclear about whether we were talking about the same board due to unfamiliar nomenclature. Please let me know, as I'm in the middle of a project.
>>>>> Cascabel
Thanks !! Perhaps that info needs to be added to the glossary in the Padawan's Training room. I never would have guessed that was the term for the construction set parts !!
While we are on the subject, what exactly are "pucks" ? Maybe you builders could start a useful thread on terminology of parts and their uses. In my searches, I also saw references to an "anti-vandal switch", with no explanation as to what it would be for.
>>>> Cascabel
Thanks !! Perhaps that info needs to be added to the glossary in the Padawan's Training room. I never would have guessed that was the term for the construction set parts !!
While we are on the subject, what exactly are "pucks" ? Maybe you builders could start a useful thread on terminology of parts and their uses. In my searches, I also saw references to an "anti-vandal switch", with no explanation as to what it would be for.
>>>> Cascabel
Buckpucks or "pucks" are LED drivers. You would use one of these in place of a resistor in a stunt (no sound) setup. The buckpuck delivers a constant voltage and current to an LED extremely efficiently.
An anti-vandal switch is a style of switch that you will see in many builds. The are usually illuminted in a ring style or a dot style. The term comes from the fact that they are extremely durable and are difficult to open...or "vandalize" ;)
1- 5W Seoul Red - $12 Shipped you ok shipping this to the uk? need heat sink and tape if you have it to?
i need a eat sink that will fit inside a tiny xxx 1" I.D. tube. i don't mind which type as long as it does what it says on the tin as have to custom fit it to a hilt i have. :)
its the same I.D. as the mhs blade holder 1" blade slides in the same as the mhs i have. the main body of the saber is 1.2" but the led is not being fitted in that section, it will be fitted in the blade holder section.
and yes LED, heat sink, module and optics would be great.
PM sent.
Hi a couple of quick questions...
Firstly... would the Ultra 2.0 handle a tri rebel with 2 colours in series ?
Secondly... have you got 2 ultras or just the one ?
Lastly... if you do have 2, do they both include the transistor ?
Many thanks
PM Sent :)
I don't suppose you would be willing to sell the BC without the screen? ;D
Alright, im a noob and the MR 616 board caught my attention when you mentioned 3 colors... how exactly does that work? Does this mean that I can swap between 3 colors and 2 fonts on the fly, so to speak? Is this similar to a CF-CeX thing? As someone with no capability to work on internals but wanting a color changer this would be huge for me (a CF6-CeX is a bit out of my league and price point atm lol).
Feel free to PM me if you would rather keep the thread uncluttered. Thanks GG!
PM sent for you! ;D
PM incoming.
PM. Sent. Add one of the PC's to it if still avail.
PM sent
I have 2 of those old corban drivers. cant find a wiring diagram for them anymore. any ideas where a diagram might be hiding? and im interested in a petite C if one is left.
I have 2 of those old corban drivers. cant find a wiring diagram for them anymore. any ideas where a diagram might be hiding? and im interested in a petite C if one is left.
I have 2 of those old corban drivers. cant find a wiring diagram for them anymore. any ideas where a diagram might be hiding? and im interested in a petite C if one is left.
PM sent.
PM sent.
I'll grab PM's and get back at you in a few min ;) The answers are...easier...very bright/comparable...yes I have 2, I think ;)
PM sent.
I'll grab PM's and get back at you in a few min ;) The answers are...easier...very bright/comparable...yes I have 2, I think ;)
But can it be weathered? ;D
PMed
Pm sent on bass speakers... All of em
Can I haz thesePm sent on bass speakers... All of em
Well, I'm not sure that you mean "all" since I am listing more than I originally said, lol. Posting pix now, well...because I took the time to take them ;)
Can I haz thesePm sent on bass speakers... All of em
Well, I'm not sure that you mean "all" since I am listing more than I originally said, lol. Posting pix now, well...because I took the time to take them ;)
"**NEW**8 Ohm 2W 28mm Megabass TCSS HO speakers (6 available, pix forthcoming tonight) $6 shipped, $34 for all 6.
No pix, lol. Just look at the TCSS ones, they are the friggin same (I forgot to take these, lol)
**NEW**8 Ohm 2W 27mm Railmaster HO Megabass speaker (1 available, pix forthcoming tonight) $7 shipped"
Hi General,
How much would be one (or two) of these shipped to France?
8 Ohm 2W Oval HO Speakers (from Obi TPM run)
Hi General,
How much would be one (or two) of these shipped to France?
8 Ohm 2W Oval HO Speakers (from Obi TPM run)
PM sent good sir!
Hi General,
How much would be one (or two) of these shipped to France?
8 Ohm 2W Oval HO Speakers (from Obi TPM run)
Shipping to France via first class mail (not trackable) is $9.25. I could get as many as 3 in that package.
Pm sent
Payment sent for LED's and optic's
I will take the Corbin board, please.
Pm gg
What does SRD stands for?
Stress related disorder ::)?
Yeah, I knew what color it was, but not what the acronym stood for.
Thanks both of you and sorry for the chatter.
LOL, no problem at all. My threads are places to have fun. Chatter is perfectly fine with me ;)
Updated. CFv4.2, P4 and LEDEngin 5W LEDs. ALso recently added some great Luxeon Red LEDs.
Updated. CFv4.2, P4 and LEDEngin 5W LEDs. ALso recently added some great Luxeon Red LEDs.
"Aqua" being upgraded?!?! **drooooooool**
Updated. CFv4.2, P4 and LEDEngin 5W LEDs. ALso recently added some great Luxeon Red LEDs.
"Aqua" being upgraded?!?! **drooooooool**
I have decided to leave the hilt as-is. It is Aqua and shall not become a shadow of it's former self as her forbear has so recently done. The electronics shall be upgraded with modern resonance techniques and a rebuild of the mounting assembly of the blinkies. She is Iconic and shall remain so.
Updated. CFv4.2, P4 and LEDEngin 5W LEDs. ALso recently added some great Luxeon Red LEDs.
"Aqua" being upgraded?!?! **drooooooool**
I have decided to leave the hilt as-is. It is Aqua and shall not become a shadow of it's former self as her forbear has so recently done. The electronics shall be upgraded with modern resonance techniques and a rebuild of the mounting assembly of the blinkies. She is Iconic and shall remain so.
Hey, I wouldn't have it any other way. That's probably my favorite K3GR ;)
Updated. CFv4.2, P4 and LEDEngin 5W LEDs. ALso recently added some great Luxeon Red LEDs.
"Aqua" being upgraded?!?! **drooooooool**
I have decided to leave the hilt as-is. It is Aqua and shall not become a shadow of it's former self as her forbear has so recently done. The electronics shall be upgraded with modern resonance techniques and a rebuild of the mounting assembly of the blinkies. She is Iconic and shall remain so.
Hey, I wouldn't have it any other way. That's probably my favorite K3GR ;)
Mine too...until Fidelis drops later this week. Then all other K3GR's will haz a sad. Seriously. It is beyond awesome...
pm sent for us 2.5
payment sent
...I Have a shopping problem apparently ;)
Pm sent
Checkz yur emailz 2 ;)
Do you still have any rgb LEDs?
Also when you say optics and holders does that include the heatsink?
I prefer the ultrasaber type.
PM sent
Just wondering if the 3W RGB LED's are individually addressable or if they have a common cathode/anode?
Hi LDM
About the CF 4.3, you mention its chopped and works like NB.
Is it compared to a NB V2.
I tried to look for the Manual for the CF4 but its not on Plecter.
What are its specs, # font banks, have Aux? Raw?. CEX capable?
Just want to know if it has advantages over the NB2?
This board might be great for an MHS Build
Thanks!
Cool, is this is pre Cex or is that possible and recommended LED?
PM Sent
PMed about LED's
PM sent on RGB Led
Pm sent
Pm sent
Replied.
Payment sent for x3 regal speakers
Pm sent
:))
Ill take the chopped cf its its still available.
Ill take the chopped cf its its still available.
It is indeed. Just shoot me a PM and I'll get you taken care of.
Ill take the chopped cf its its still available.
It is indeed. Just shoot me a PM and I'll get you taken care of.
If that falls through, let me know. I have funds ready to send.
Ill take that pc 1.6 if you have it still
I read your post about the PC2 before I saw Noyl posted wanting PC2 earlier this morning. He posted wanting one earlier then I sent you the PM so give him first option. If he does not pick it up or you get another one I would take it for sure.
Can i get the remaining TCSS DPDT slide switch?
do you have the p4 red with optics? im looking for a bright red to use with a hasbro or Mr board. thanks (:
Do you have any Tri color stars? I am looking for a couple to make sabers for my sons.
do you have any speakers available???
Pmed you on the blaster core 3 :grin:
PM sent re switches :wink:
Got a PC1.6 or 2.0?
PM sent regarding triangular LED's.
-Tulsah
PM sent regarding triangular LED's.
-Tulsah
In the mail :-)
Do you have any of the the Arrow (scrolling) bargraphs left?
PM SENT
Luxeon III BIN 1 or 2 Cyan - $10 each Shipped --2 Left (This is the SRD color...very beautiful!)
Any of these left? If so which BIN 1 or 2?
Luxeon III BIN 1 or 2 Cyan - $10 each Shipped --2 Left (This is the SRD color...very beautiful!)
Any of these left? If so which BIN 1 or 2?
PM'ed you General
Luxeon III BIN 1 or 2 Cyan - $10 each Shipped --2 Left (This is the SRD color...very beautiful!)
Any of these left? If so which BIN 1 or 2?
PM'ed you General
Replied...subtract $6 from what I said...memory must be fading, lol.
Payment was sent last week. Have not heard back from you.
Will the LDM 12W RGBW LEDs work with the Prism V4?