FX-Sabers.com

The S.A.B.E.R. GUILD: Saber Manufacturers => Plecter Labs => Topic started by: BEN KENOBI on November 12, 2020, 09:43:12 AM

Title: CF.9.0
Post by: BEN KENOBI on November 12, 2020, 09:43:12 AM

I'm working on a saber with a CF 9.0 sound board. I have three colors hooked up. Blue. Green , Red. On the back of the board I have the bridges done on the two places to hook up the green and red. The color blue I had hooked up by themselves on the back of the board. The flash on clash works great ;but, I tried changing the colors of the other fonts manually like this

0-color    0,750,0,0 for green. When I turn it on the color is still blue. Am I not seeing something here?  :sad:

Title: Re: CF.9.0
Post by: erv on November 12, 2020, 12:15:17 PM

are you trying to setup up colors in the font or with the color profiles in the override file ?
Also, I suggest adjusting with RICE in real time to see if "things are changing"

Title: Re: CF.9.0
Post by: BEN KENOBI on November 12, 2020, 03:53:20 PM

In the font file.

Title: Re: CF.9.0
Post by: erv on November 12, 2020, 10:52:08 PM

Ok, then ensure there is no color profiles in the override file

Title: Re: CF.9.0
Post by: BEN KENOBI on November 13, 2020, 06:19:27 AM

Ok, then ensure there is no color profiles in the override file




At my age I don't know what you mean? Delete this?

Title: Re: CF.9.0
Post by: BEN KENOBI on November 13, 2020, 03:23:28 PM

I have a widows 10 HP ;so, what program do I get to be able to open R.I.C.E and operate?

Title: Re: CF.9.0
Post by: erv on November 14, 2020, 01:51:27 AM

Quote from: BEN KENOBI on November 13, 2020, 03:23:28 PM

I have a widows 10 HP ;so, what program do I get to be able to open R.I.C.E and operate?

use RICE for CF9 from the DL page

Title: Re: CF.9.0
Post by: BEN KENOBI on December 15, 2020, 03:57:28 PM

Hey Erv
     
     I've got my crystal focus 9 hooked up to R.I.C.E and I can change the color and save it to my sound board ;but, when I try to change the color of the blade in the next font it changes the color of the last font that I worked on. Did I miss something? After each font when I change the color of the blade and the foc  I also hit save it all. Is this right?

Title: Re: CF.9.0
Post by: erv on December 15, 2020, 11:55:04 PM

that's correct, just ensure to read again the new settings after you moved to the next font. Also, double check that you don't have any color profiles anymore stored in override.txt (only font colors defined within the font config)

Title: Re: CF.9.0
Post by: Nemezis on December 16, 2020, 03:02:16 AM

Are you running RICE under windows or Mac? Sometimes RICE has strange behaviour under Mac..

Title: Re: CF.9.0
Post by: BEN KENOBI on December 25, 2020, 06:39:29 AM

Thanks everyone. problem solved .