fiduciary

Author Topic: Orbital Machining TPM's - LDM's install group  (Read 8503 times)

0 Members and 1 Guest are viewing this topic.

Offline GENERAL GRIEVOUS

  • Call 1-800-GENERAL now!
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 7033
  • The Saber Artist formerly known as LDM
    • ldmcustomsabers.com
Re: Orbital Machining TPM's - LDM's install group
« Reply #30 on: December 31, 2011, 01:26:15 AM »
These sabers truly are amazing.  I know the owners will love them.  I cant wait to see some of the reactions people have once they hold them for the first time.


GG while there was zero extra space I think that the design that Wat put into them thinking of the installers made it much easier than it could have been lol.  I know I would rather do this saber than a Larbel or Korbanth because they were designed specifically for what we were going to do.

  

I 100% agree. :D

Thank you everyone.  This is truly not meant as an LDM ball wash.  I was asked to post since my sabers had been inspected and deemed worthy for public consumption.  I know each of the installers and they are the biggest of the big names and all exceptionally skilled.  There will be absolute continuity in quality amongst sabers.   Although only a few of us know who did whose,  I promise that it does not matter.  I also promise that if my guys duel with, and break their sabers I will not be happy because it is literally a full re-install to mess with these.  ;)

Carry on. ;D  Oh yeah, y'all gonna LOVE these. ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
« Last Edit: December 31, 2011, 01:37:23 AM by GENERAL GRIEVOUS »

Offline djobitwan7

  • Master Force User
  • *****
  • Posts: 943
Re: Orbital Machining TPM's - LDM's install group
« Reply #31 on: December 31, 2011, 05:53:25 AM »
All I can say is, the hard part is finally over...unless you count waiting in the mail for yours, LOL. Great job GG and to all installers. Like Yar, I have a Larbel and glad it was considered a 10 at some point. 1:1 accuracy with all the CF buttered toast with cinnamon added. This was part of my Christmas gift to myself and will be all to happy to spin this every now and again. Congrats to the ones in on this run and can't help, but feel a little sad for the people who are now slapping themselves on the forehead, because they didn't have a V8.

So, now we have Obi-wan and Qui-gon Jinn almost done. How about a 1:1 Darth Maul to complete TPM set. I'd be all over that.

Offline Scorpion

  • Master Force User
  • *****
  • Posts: 3795
  • GET OVER HERE!!!
Re: Orbital Machining TPM's - LDM's install group
« Reply #32 on: December 31, 2011, 05:56:10 AM »
So, now we have Obi-wan and Qui-gon Jinn almost done. How about a 1:1 Darth Maul to complete TPM set. I'd be all over that.

i agree and a huge discount on the maul for the people whos on both other runs  :D


JQ SABERS MASTER ORGUS DIN CFX
JQ/LDM/MH GK3 OBI-WAN KENOBI Proffie
JQ MASTER REPLICAS LE SIDIOUS CONVERSION CS3
JQ~OM AWESOMESAUCE MAUL STAFF DUAL CFv7
LDM MKVI LUKE SKYWALKER ROTJ REVEAL CFv6
JQ SABERS OBI-WAN EP4 ANH (RUSSREP)CSV4
FX SABERS VINTAGE GRAFLEX IV ANH CFv5
FX SABERS VINTAGE GRAFLEX V ESB CFv5
JQ SABERS OBI-WAN REVEAL AOTC CS3.0
JQ~VV STARKILLER #2 RUN1 CFv6 cex
JQ~OM ANAKIN "Skinnyflex" CS3
JQ~TRIDCLOUD ANAKIN AOTC CFv7
SC~VV QUIGON JINN #2 CFv5
OM OBIWAN TPM #2 CFv5
JQ SABERS LUKE ROTJ CFv4
JQ~korbanth DOOKU CS2
JQ~korbanth SIDIOUS CS2
JQ SABERS Kylo Ren CS3
LINK TO MY SABERS

Offline Gil Gamesh

  • Formerly known as Kit Fisto
  • Master Force User
  • *****
  • Posts: 2626
Re: Orbital Machining TPM's - LDM's install group
« Reply #33 on: December 31, 2011, 08:08:27 AM »


i agree and a huge discount on the maul for the people whos on both other runs  :D
[/quote]

 ::) ???  Let's get the current workload done and over, give our machinists and installers a brief reprieve, and then jump back on the gimmegimmewanwant train  ;)
Support our Font Makers!

Offline Scorpion

  • Master Force User
  • *****
  • Posts: 3795
  • GET OVER HERE!!!
Re: Orbital Machining TPM's - LDM's install group
« Reply #34 on: December 31, 2011, 08:31:45 AM »


i agree and a huge discount on the maul for the people whos on both other runs  :D

 ::) ???  Let's get the current workload done and over, give our machinists and installers a brief reprieve, and then jump back on the gimmegimmewanwant train  ;)
[/quote]




J/K  ::)

was joking mate
« Last Edit: December 31, 2011, 08:33:51 AM by Scorpion »


JQ SABERS MASTER ORGUS DIN CFX
JQ/LDM/MH GK3 OBI-WAN KENOBI Proffie
JQ MASTER REPLICAS LE SIDIOUS CONVERSION CS3
JQ~OM AWESOMESAUCE MAUL STAFF DUAL CFv7
LDM MKVI LUKE SKYWALKER ROTJ REVEAL CFv6
JQ SABERS OBI-WAN EP4 ANH (RUSSREP)CSV4
FX SABERS VINTAGE GRAFLEX IV ANH CFv5
FX SABERS VINTAGE GRAFLEX V ESB CFv5
JQ SABERS OBI-WAN REVEAL AOTC CS3.0
JQ~VV STARKILLER #2 RUN1 CFv6 cex
JQ~OM ANAKIN "Skinnyflex" CS3
JQ~TRIDCLOUD ANAKIN AOTC CFv7
SC~VV QUIGON JINN #2 CFv5
OM OBIWAN TPM #2 CFv5
JQ SABERS LUKE ROTJ CFv4
JQ~korbanth DOOKU CS2
JQ~korbanth SIDIOUS CS2
JQ SABERS Kylo Ren CS3
LINK TO MY SABERS

Offline Scruffy Nerf Herder

  • #1 supporter of Jar Jar for EPVII main lead character
  • Master Force User
  • *****
  • Posts: 1336
Re: Orbital Machining TPM's - LDM's install group
« Reply #35 on: December 31, 2011, 08:45:27 AM »
Lol I'm totally down for a maul hilt but my savings account can wait!

Offline Lord Xeno

  • Master Force User
  • *****
  • Posts: 656
  • Sith...they mostly come out at night. Mostly.
Re: Orbital Machining TPM's - LDM's install group
« Reply #36 on: December 31, 2011, 11:26:10 AM »
Lol I'm totally down for a maul hilt but my savings account can wait!

Yeah I can wait along time for that one  :D  Or rather my credit card certainly can

And with that said, my final payment has been sent.  Whew.  Almost thought I wasn't gonna make it.  8) 

Happy new year

Offline EV-9D9

  • Master Force User
  • *****
  • Posts: 545
Re: Orbital Machining TPM's - LDM's install group
« Reply #37 on: January 04, 2012, 02:07:03 PM »
Quote
unless you count waiting in the mail for yours

Yes waiting on the mail might be the most challenging part. I just mailed a saber and the post office kindly informed me through the tracking number that is was "Missent."
-Graflex V Replica - BB W-FoC - by Master Yoda - CF5
-Obi-Wan Kenobi ANH - BRG - Romans Parts Screen Accurate - by scottjua - CF7+CeX
-Obi-Wan Kenobi TPM - BB BB-FoC - OM Screen Accurate - CF5
-Stormtrooper - RGBW - JQSabers - Upgraded by Lord Bane - CF6+CeX
-Ventress (Force Witch) - RGB - Solo's Hold - CF7+CeX

Offline GENERAL GRIEVOUS

  • Call 1-800-GENERAL now!
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 7033
  • The Saber Artist formerly known as LDM
    • ldmcustomsabers.com
Re: Orbital Machining TPM's - LDM's install group
« Reply #38 on: January 04, 2012, 05:32:19 PM »
Quote
unless you count waiting in the mail for yours

Yes waiting on the mail might be the most challenging part. I just mailed a saber and the post office kindly informed me through the tracking number that is was "Missent."

Tell me that is not Ferroutous... :-\

Offline EV-9D9

  • Master Force User
  • *****
  • Posts: 545
Re: Orbital Machining TPM's - LDM's install group
« Reply #39 on: January 04, 2012, 06:34:26 PM »
Quote
unless you count waiting in the mail for yours

Yes waiting on the mail might be the most challenging part. I just mailed a saber and the post office kindly informed me through the tracking number that is was "Missent."

Tell me that is not Ferroutous... :-\
I am afraid so...  ???
-Graflex V Replica - BB W-FoC - by Master Yoda - CF5
-Obi-Wan Kenobi ANH - BRG - Romans Parts Screen Accurate - by scottjua - CF7+CeX
-Obi-Wan Kenobi TPM - BB BB-FoC - OM Screen Accurate - CF5
-Stormtrooper - RGBW - JQSabers - Upgraded by Lord Bane - CF6+CeX
-Ventress (Force Witch) - RGB - Solo's Hold - CF7+CeX

 

retrousse