FX-Sabers.com
FX-Sabers Discussion - Including a Gallery of custom sabers. => New Ideas and Technologies => Topic started by: Darth_Baleful on January 12, 2009, 12:49:25 AM
-
helooo evrybody.. the title is kinda self explanitory :P but i wanted to share with you how to make a saber carrying case that i designed. and forgive me if this in the wrong place. but it is saber related after all, and its custom. so i figured here would be alright.
here we go ;D
_________________________________________________________________________
materials
-some kind of case.. attache, metal breifcase etc. size doesn't matter ( :P could have worded that different lol) just depends on how many sabers you wanna put in it
-fabric, use your imagination here, 1 meter of any fabric should be plenty
-soft foam board. hard foam would work too but the soft stuff is a lot easier to manage
-razor blade, or any kind of edge really.. watch those fingers ;)
-hot glue
getting started
so the case that i used was just a plain leather briefcase. i wanted something that was inconspicuous, more or less. plus i had to have one with a 6 didget lock ont it, ill give you a hint. its my favorite saber battles, by episode, in decending order ;D.. some cases have a folder/pen carrier on the inside. so if yours does, than just cut the stiching on it to remove it. you wont see the case linner when its done so if you end up snagging the fabric, its no big deal. thats about all you have to get the case ready, so lets move on.
the linner
alright then.. start of by cutting a piece out your foam that will fit the dimensions of your case.. you will need two of the same size. one of the pieces you will need to cut down the middle. not in half, but cut it so it will be thinner. catch my drift? good.... next!
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi424.photobucket.com%2Falbums%2Fpp324%2Fdarthbaleful%2F1213082122.jpg&hash=8224b85d1bd124824f6733e8c44e9195fefdc318)
lay or your sabers, and whatever else your putting in your case down on the thicker piece of foam. this is the base, and where everything will be set in.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi424.photobucket.com%2Falbums%2Fpp324%2Fdarthbaleful%2F1213082004.jpg&hash=029fbd204a808a07432487896cd397a9b271511a)
once you have a good idea of where everything will go. take out your knife and cut an outline around all your pieces. then either dig out or cut out the rest so you will have sort of a ditch (dont cut all the way through the foam)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi424.photobucket.com%2Falbums%2Fpp324%2Fdarthbaleful%2F1213082122a.jpg&hash=a2c2c760f28e05c60160a3a8831effbc1a9db918)
something like this
assembly
lay your fabric out flat. put your foam pieces face down with about 10" between them. fold your fabric around the foam glueing it as you go. on the base peice (carved one) make sure to leave lots of slack. thats so the fabric can be pushed into the carved pieces to make a pocket of sorts
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi424.photobucket.com%2Falbums%2Fpp324%2Fdarthbaleful%2F1213082002.jpg&hash=772999c2bd9392edcbe26c1b42fe0252e9797c24)
your base piece can just be set into the case. the top piece will be glued onto the lid (inside of course :P)
DONE!!
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi424.photobucket.com%2Falbums%2Fpp324%2Fdarthbaleful%2F1213082012.jpg&hash=6367296ae16f96b6812884f7a815e84268a3c60c)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi424.photobucket.com%2Falbums%2Fpp324%2Fdarthbaleful%2F1213082013.jpg&hash=707349cdd5f59aeee6f23b2577e98af7fb968c0b)
thanks for reading guys
wow this is the most i've written at one time, since i was high school lol :D
MTFBWY
-
Good Job DB, ....This application also works with making presentation cases and displays.
This is one I made for MasterKris' saber, ....I didn't use foam for the lining but rather polyfil, ....not really recommended for transporting a saber, ...but the polyfil makes a great "pillow" for display cases. The satin is glued in place as you have done in your tutorial.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj156%2Fcs6a-zero%2Fsaber1.jpg&hash=5c23e3f81ce78d9043716607fb90c20f7421f50f) (http://i271.photobucket.com/albums/jj156/cs6a-zero/saber1.jpg) (https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj156%2Fcs6a-zero%2Fsaber.jpg&hash=ac0a366760910d78ba7adb8203e2ae4849c86bb3) (http://i271.photobucket.com/albums/jj156/cs6a-zero/saber.jpg)
-
thats a sweet looking case lord call :o where did you find that? the shell obviously lol, you would have done the rest
-
Found that at Burkes Outlet, if I remember, ...here's the original link, ..it's in there somewhere:
http://www.fx-sabers.com/forum/index.php?topic=14636.0
-
ha that was literaly right after i commented on it :P no wonder i didnt see it before
-
Good job guys with those cases, those looks really great! ;)
For those who want something more practical and easy to carry, like going to a conventions and such with your lightsabers. Just get a cheap floorball stick bag, you can place the whole saber in it, to extra pockets batteries and tools. It's really comfortable and easy to carry on events :)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi29.photobucket.com%2Falbums%2Fc268%2Fnikkis1982%2FMonster-Stick-Bag.jpg&hash=1f7fb50ce20fbb14ccf31dbe6b361a35fc7ed129) ;D
-
Good Job DB, ....This application also works with making presentation cases and displays.
This is one I made for MasterKris' saber, ....I didn't use foam for the lining but rather polyfil, ....not really recommended for transporting a saber, ...but the polyfil makes a great "pillow" for display cases. The satin is glued in place as you have done in your tutorial.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj156%2Fcs6a-zero%2Fsaber1.jpg&hash=5c23e3f81ce78d9043716607fb90c20f7421f50f) (http://i271.photobucket.com/albums/jj156/cs6a-zero/saber1.jpg) (https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj156%2Fcs6a-zero%2Fsaber.jpg&hash=ac0a366760910d78ba7adb8203e2ae4849c86bb3) (http://i271.photobucket.com/albums/jj156/cs6a-zero/saber.jpg)
Wow very nice looking saber case. I have to agree that this a a wonderful display case and not as practical for conventions and general transporting use. It looks amazing though for display.
-
Good job guys with those cases, those looks really great! ;)
For those who want something more practical and easy to carry, like going to a conventions and such with your lightsabers. Just get a cheap floorball stick bag, you can place the whole saber in it, to extra pockets batteries and tools. It's really comfortable and easy to carry on events :)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi29.photobucket.com%2Falbums%2Fc268%2Fnikkis1982%2FMonster-Stick-Bag.jpg&hash=1f7fb50ce20fbb14ccf31dbe6b361a35fc7ed129) ;D
wow that is cool where can I buy some of these Emperor?
-
I believe you should find these from well provided sport stores or big markets. Costs about 10-20$. Nicely padded inside and perfect for carrying sabers. I use these.
-
I believe you should find these from well provided sport stores or big markets. Costs about 10-20$. Nicely padded inside and perfect for carrying sabers. I use these.
ok thanks
-
Wow, that a cool approach to create item inserts, Darth Baleful. Is that a polyester fabric? I was just wondering because I had thought of creating a display case, but with crushed velour. But that satin looking polyester looks interesting also.
*MOVED*
I sent it where my carrying cases were located.
-
Nice work to both of you. Why isn't polyfill recommended for transport?
as for alternative bags and cases, I use my rifle case for my sabers. :D
Baleful, your tutorial was well written and very easy to understand. Good work. :)
Thanks for the response DCv1.0. i did a ittle research and found some stuff on it. ;) :)
-
Why isn't polyfill recommended for transport?
Because it's soft and pillow-like and doesnt really absorb impacts unless really thick. Foam, on the other hand, does.
-
DB... That's a mighty cleaver creation you've come up with :) I may have to make something like that in the not too distant future ;D Then all I'd have to worry about is my blade(s) :-\
-
Why isn't polyfill recommended for transport?
Because it's soft and pillow-like and doesnt really absorb impacts unless really thick. Foam, on the other hand, does.
I use a rifle foam in the ones I've made. I forget the foam number, but it is a very ridged foam that cuts nice and retains form. However, for Darth_Baleful's case's foam lining is cool also. I believe with the Material over the Foam, it will give it some ridged structure.
And the nice thing about that material, if it is polyester or satin, it will help you keep "the bling on the saber thing!" ;D
-
Wow, that a cool approach to create item inserts, Darth Baleful. Is that a polyester fabric? I was just wondering because I had thought of creating a display case, but with crushed velour. But that satin looking polyester looks interesting also.
*MOVED*
I sent it where my carrying cases were located.
thanks Han, its actually silk i believe.. crushed velour would look sweet too ;)
Nice work to both of you. Why isn't polyfill recommended for transport?
as for alternative bags and cases, I use my rifle case for my sabers. :D
Baleful, your tutorial was well written and very easy to understand. Good work. :)
Thanks for the response DCv1.0. i did a ittle research and found some stuff on it. ;) :)
thanks a lot man. i worked on for a while, just to make sure i didnt miss anything lol
that rifle case is a cool idea too! then you can keep the blades on your sabers
DB... That's a mighty cleaver creation you've come up with :) I may have to make something like that in the not too distant future ;D Then all I'd have to worry about is my blade(s) :-\
thanks master Ti ;D
ya thats the tricky part lol :P actually i put in a carrier with a velcro strip on the inside of my cloak, for my sith "get-up" (a blade on each side)
OR!! Ooo... they should make a saber blade that could unscrew in the middle (without effecting the lighting of course) 8)